Chargement...
 
[Voir/Cacher menus de gauche]
[Voir/Cacher menus de droite]

4 - Toutes les autres applications, les émulateurs...

> Forums de discussion > 4 - Toutes les autres applications, les émulateurs... > [ABANDONNE]comprendre le message d'erreur au lancement
Dernier post

[ABANDONNE]comprendre le message d'erreur au lancement

calixtus06 Articles : 840 utilisateur non connecté
Image

Salut, comment dois-je comprendre ce message et comment y remédier ?

Merci d'avance !!

Nico

olinuxx Articles : 18936 utilisateur non connecté France
Il te dit qu'il y a un soucis avec le chargement du module snd_usb_toneport.

Sur mon ordi, si je lance la commande :
/sbin/modinfo snd_usb_toneport
celle-ci me dit qu'il s'agit d'un module du noyau qui est le pilote pour le matériel "TonePort USB". As-tu ce matériel ?

Autre question (penses-y à chaque fois que tu postes un message step) : quelle distribution utilises-tu ?
Et quel noyau également : commande
uname -a


calixtus06 Articles : 840 utilisateur non connecté
Salut !

Y a t il justement un moyen de mettre son matériel informatique et carte son en "signature" des posts ?

J'utilise librazik

Concernant le toneport c'est plus ou moins le nom de ma carte son branchée en usb ( ux2 de line 6)

uname -a

Linux nicolasMAO 4.9.0-0.bpo.2-amd64 #1 SMP Debian 4.9.13-1~bpo8+1 (2017-02-27) x86_64 GNU/Linux
nicolas@nicolasMAO:~$


nicolas@nicolasMAO:~$ /sbin/modinfo snd_usb_toneport


filename: /lib/modules/4.9.0-0.bpo.2-amd64/kernel/sound/usb/line6/snd-usb-toneport.ko
license:        GPL
description:    TonePort USB driver
alias:          usb:v0E41p4142d*dc*dsc*dp*ic*isc*ip*in00*
alias:          usb:v0E41p4141d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0E41p4147d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0E41p4151d*dc*dsc*dp*ic*isc*ip*in00*
alias:          usb:v0E41p4150d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0E41p4153d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0E41p4750d*dc*dsc*dp*ic*isc*ip*in*
depends:        snd-usb-line6,usbcore,snd
intree:         Y
vermagic:       4.9.0-0.bpo.2-amd64 SMP mod_unload modversions 
nicolas@nicolasMAO:~$

merci !

olinuxx Articles : 18936 utilisateur non connecté France
calixtus écrit :
Y a t il justement un moyen de mettre son matériel informatique et carte son en "signature" des posts ?


Merci d'ouvrir un autre fil de discussion dans la section de forum kivabien.


calixtus06 écrit :
Concernant le toneport c'est plus ou moins le nom de ma carte son branchée en usb ( ux2 de line 6)


Essaie de démarrer avec ton ux2 débranchée puis branche là ensuite. Et donne nous les 20 dernières lignes de la commande "dmesg".

calixtus06 Articles : 840 utilisateur non connecté
je m'y suis pris en deux fois. Mais ça démarre à 0.27

[    0.273973] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.273973] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.273973] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *9
[    0.273973] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.273973] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.274074] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.274207] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[    0.274339] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.274474] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.274607] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.274739] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.274871] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.275004] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.275136] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.275270] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.275403] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.275535] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[    0.275669] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[    0.275800] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[    0.275933] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
[    0.276076] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[    0.276210] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.276356] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.276489] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *9
[    0.276622] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
[    0.276756] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[    0.276888] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[    0.277021] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[    0.277155] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[    0.277290] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[    0.277421] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[    0.277553] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[    0.277894] ACPI : EC: event unblocked
[    0.277916] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.277918] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.280023] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.280024] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.280026] vgaarb: loaded
[    0.280027] vgaarb: bridge control possible 0000:02:00.0
[    0.280097] PCI: Using ACPI for IRQ routing
[    0.281084] PCI: pci_cache_line_size set to 64 bytes
[    0.281172] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.281174] e820: reserve RAM buffer [mem 0xdffa8000-0xdfffffff]
[    0.281605] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.281611] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.281616] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[    0.284020] clocksource: Switched to clocksource hpet
[    0.294809] VFS: Disk quotas dquot_6.6.0
[    0.294855] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.294996] pnp: PnP ACPI init
[    0.295198] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.295287] pnp 00:01: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.295735] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.295737] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.295739] system 00:02: [io  0x4000-0x407f] has been reserved
[    0.295741] system 00:02: [io  0x4080-0x40ff] has been reserved
[    0.295745] system 00:02: [io  0x4400-0x447f] has been reserved
[    0.295747] system 00:02: [io  0x4480-0x44ff] has been reserved
[    0.295749] system 00:02: [io  0x4800-0x487f] has been reserved
[    0.295751] system 00:02: [io  0x4880-0x48ff] has been reserved
[    0.295754] system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.295756] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.295758] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
[    0.295760] system 00:02: [mem 0xfefe2000-0xfefe3fff] has been reserved
[    0.295762] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.295764] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.295768] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.295860] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.295961] system 00:04: [io  0x0250-0x0253] has been reserved
[    0.295963] system 00:04: [io  0x0256-0x025f] has been reserved
[    0.295965] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.295967] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.295971] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.296129] system 00:05: [io  0x5000-0x507f] has been reserved
[    0.296131] system 00:05: [io  0x5080-0x50ff] has been reserved
[    0.296134] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.296241] system 00:06: [mem 0xfc000000-0xfdffffff] has been reserved
[    0.296244] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.296528] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.296530] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.296532] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.296535] system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.296537] system 00:07: [mem 0xfc000000-0xffffffff] could not be reserved
[    0.296540] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.297479] pnp: PnP ACPI: found 8 devices
[    0.304883] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.304958] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.304969] pci 0000:00:0c.0: PCI bridge to [bus 02]
[    0.304973] pci 0000:00:0c.0:   bridge window [io  0xd000-0xdfff]
[    0.304984] pci 0000:00:0c.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.304991] pci 0000:00:0c.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.305004] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.305009] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.305019] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.305037] pci 0000:00:16.0: PCI bridge to [bus 04]
[    0.305047] pci 0000:00:16.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.305067] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.305068] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.305070] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.305072] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.305074] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfbffffff window]
[    0.305075] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff window]
[    0.305077] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.305079] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.305081] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.305083] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.305084] pci_bus 0000:01: resource 8 [mem 0xe0000000-0xfbffffff window]
[    0.305086] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff window]
[    0.305088] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.305090] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.305091] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.305093] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.305095] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.305097] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.305229] NET: Registered protocol family 2
[    0.305477] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.305622] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.305850] TCP: Hash tables configured (established 32768 bind 32768)
[    0.305917] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.305952] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.306038] NET: Registered protocol family 1
[    0.306406] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.400369] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.400719] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[    0.480349] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[    0.480556] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.480570] PCI: CLS 64 bytes, default 64
[    0.480649] Unpacking initramfs...
[    1.008593] Freeing initrd memory: 24688K (ffff93c9f4fb8000 - ffff93c9f67d4000)
[    1.008600] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.008603] software IO TLB [mem 0xdbfa8000-0xdffa8000] (64MB) mapped at [ffff93ca9bfa8000-ffff93ca9ffa7fff]
[    1.009278] audit: initializing netlink subsys (disabled)
[    1.009315] audit: type=2000 audit(1491979560.008:1): initialized
[    1.009726] Initialise system trusted keyrings
[    1.009863] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.009894] zbud: loaded
[    1.076761] Key type asymmetric registered
[    1.076762] Asymmetric key parser 'x509' registered
[    1.076792] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.076827] io scheduler noop registered
[    1.076828] io scheduler deadline registered
[    1.076844] io scheduler cfq registered (default)
[    1.077266] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[    1.077672] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[    1.078055] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[    1.078208] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.078215] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.078239] intel_idle: does not run on family 6 model 23
[    1.078886] Monitor-Mwait will be used to enter C-1 state
[    1.078891] Monitor-Mwait will be used to enter C-3 state
[    1.078894] Monitor-Mwait will be used to enter C-3 state
[    1.078905] tsc: Marking TSC unstable due to TSC halts in idle
[    1.079344] GHES: HEST is not enabled!
[    1.079430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.080044] Linux agpgart interface v0.103
[    1.080114] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.080114] AMD IOMMUv2 functionality not available on this system
[    1.080362] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.084186] i8042: Detected active multiplexing controller, rev 1.1
[    1.086723] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.086728] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.086773] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.086813] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.086852] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.087052] mousedev: PS/2 mouse device common for all mice
[    1.087114] rtc_cmos 00:03: RTC can wake from S4
[    1.087408] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.087494] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.087524] ledtrig-cpu: registered to indicate activity on CPUs
[    1.087979] NET: Registered protocol family 10
[    1.088258] mip6: Mobile IPv6
[    1.088260] NET: Registered protocol family 17
[    1.088264] mpls_gso: MPLS GSO support
[    1.088481] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[    1.088541] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.088722] registered taskstats version 1
[    1.088724] Loading compiled-in X.509 certificates
[    1.090832] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.091240] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.091262] zswap: loaded using pool lzo/zbud
[    1.091878] rtc_cmos 00:03: setting system clock to 2017-04-12 06:46:01 UTC (1491979561)
[    1.091937] PM: Hibernation image not present or could not be loaded.
[    1.093820] Freeing unused kernel memory: 1396K (ffffffffa9d2d000 - ffffffffa9e8a000)
[    1.093822] Write protecting the kernel read-only data: 12288k
[    1.095322] Freeing unused kernel memory: 2032K (ffff93ca02804000 - ffff93ca02a00000)
[    1.101041] Freeing unused kernel memory: 1244K (ffff93ca02cc9000 - ffff93ca02e00000)
[    1.110671] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.123943] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.124081] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.124093] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.124108] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.125131] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.125183] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.126757] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.126847] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.126927] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.127012] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.131688] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.201676] ACPI: bus type USB registered
[    1.201711] usbcore: registered new interface driver usbfs
[    1.201727] usbcore: registered new interface driver hub
[    1.201770] usbcore: registered new device driver usb
[    1.210782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.211634] ehci-pci: EHCI PCI platform driver
[    1.211866] ehci-pci 0000:00:04.1: EHCI Host Controller
[    1.211879] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    1.211891] ehci-pci 0000:00:04.1: debug port 1
[    1.211933] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    1.213710] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.217426] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.217560] ehci-pci 0000:00:04.1: irq 22, io mem 0xf7f7ec00
[    1.232094] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    1.232202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.232204] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.232206] usb usb1: Product: EHCI Host Controller
[    1.232207] usb usb1: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[    1.232209] usb usb1: SerialNumber: 0000:00:04.1
[    1.232422] hub 1-0:1.0: USB hub found
[    1.232431] hub 1-0:1.0: 11 ports detected
[    1.234618] ehci-pci 0000:00:06.1: EHCI Host Controller
[    1.234625] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[    1.234635] ehci-pci 0000:00:06.1: debug port 1
[    1.234663] ehci-pci 0000:00:06.1: cache line size of 64 is not supported
[    1.235346] ehci-pci 0000:00:06.1: irq 20, io mem 0xf7f7e800
[    1.248093] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.00
[    1.248209] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.248212] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.248213] usb usb2: Product: EHCI Host Controller
[    1.248215] usb usb2: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[    1.248216] usb usb2: SerialNumber: 0000:00:06.1
[    1.248425] hub 2-0:1.0: USB hub found
[    1.248434] hub 2-0:1.0: 5 ports detected
[    1.250318] ohci-pci: OHCI PCI platform driver
[    1.250444] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    1.250451] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[    1.253777] ohci-pci 0000:00:04.0: irq 23, io mem 0xf7f7f000
[    1.314170] SCSI subsystem initialized
[    1.314269] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.314272] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.314273] usb usb3: Product: OHCI PCI host controller
[    1.314275] usb usb3: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ohci_hcd
[    1.314276] usb usb3: SerialNumber: 0000:00:04.0
[    1.315936] hub 3-0:1.0: USB hub found
[    1.315947] hub 3-0:1.0: 11 ports detected
[    1.316582] ohci-pci 0000:00:06.0: OHCI PCI host controller
[    1.316589] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[    1.316674] ohci-pci 0000:00:06.0: irq 21, io mem 0xf7f7d000
[    1.325889] thermal LNXTHERM:00: registered as thermal_zone0
[    1.325891] ACPI: Thermal Zone [THRM] (60 C)
[    1.330116] libata version 3.00 loaded.
[    1.330218] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.330235] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.330544] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[    1.330968] r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xffffb31900679000, 00:26:18:62:c0:c9, XID 18000000 IRQ 24
[    1.330970] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    1.382104] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.382108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.382110] usb usb4: Product: OHCI PCI host controller
[    1.382111] usb usb4: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ohci_hcd
[    1.382113] usb usb4: SerialNumber: 0000:00:06.0
[    1.382360] hub 4-0:1.0: USB hub found
[    1.382371] hub 4-0:1.0: 5 ports detected
[    1.382852] ahci 0000:00:0b.0: version 3.0
[    1.383156] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[    1.383194] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[    1.383330] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[    1.383332] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs 
[    1.401807] scsi host0: ahci
[    1.409454] scsi host1: ahci
[    1.419528] scsi host2: ahci
[    1.427720] scsi host3: ahci
[    1.436061] scsi host4: ahci
[    1.446777] scsi host5: ahci
[    1.446909] ata1: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76100 irq 25
[    1.446911] ata2: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76180 irq 25
[    1.446912] ata3: DUMMY
[    1.446913] ata4: DUMMY
[    1.446914] ata5: DUMMY
[    1.446915] ata6: DUMMY
[    1.564024] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    1.757099] usb 1-5: New USB device found, idVendor=064e, idProduct=a116
[    1.757101] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.757102] usb 1-5: Product: USB2.0 UVC 1.3M WebCam
[    1.757104] usb 1-5: Manufacturer: SuYin
[    1.757105] usb 1-5: SerialNumber: CN1316-S30B-MI033-VS-R03.02.04
[    1.762848] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.777710] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100
[    1.777713] ata2.00: applying bridge limits
[    1.792269] ata2.00: configured for UDMA/100
[    1.940136] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.941003] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[    1.941005] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.942025] ata1.00: configured for UDMA/100
[    1.942278] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 C70P PQ: 0 ANSI: 5
[    1.990855] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633A  AS00 PQ: 0 ANSI: 5
[    1.992014] random: fast init done
[    2.012154] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e44e9c0454, max_idle_ns: 440795309354 ns
[    2.020951] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.021652] sd 0:0:0:0: [sda] Write Protect is off
[    2.021655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.021682] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.040383] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.040387] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.040600] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.259425] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[    2.296025] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[    2.332558] psmouse serio4: elantech: Elan sample query result 1a, 00, 00
[    2.461066]  sda: sda1 sda2 < sda5 >
[    2.461650] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.467984] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
[    2.931181] device-mapper: uevent: version 1.0.3
[    2.931301] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    3.004028] raid6: sse2x1   gen()  3357 MB/s
[    3.072026] raid6: sse2x1   xor()  3549 MB/s
[    3.140032] raid6: sse2x2   gen()  3859 MB/s
[    3.208028] raid6: sse2x2   xor()  4325 MB/s
[    3.276025] raid6: sse2x4   gen()  6135 MB/s
[    3.344028] raid6: sse2x4   xor()  4928 MB/s
[    3.344029] raid6: using algorithm sse2x4 gen() 6135 MB/s
[    3.344030] raid6: .... xor() 4928 MB/s, rmw enabled
[    3.344031] raid6: using ssse3x2 recovery algorithm
[    3.345021] xor: measuring software checksum speed
[    3.384008]    prefetch64-sse:  8857.000 MB/sec
[    3.424007]    generic_sse:  7781.000 MB/sec
[    3.424008] xor: using function: prefetch64-sse (8857.000 MB/sec)
[    3.491010] Btrfs loaded, crc32c=crc32c-generic
[    3.561636] PM: Starting manual resume from disk
[    3.561640] PM: Hibernation image partition 8:5 present
[    3.561641] PM: Looking for hibernation image.
[    3.561840] PM: Image not found (code -22)
[    3.561841] PM: Hibernation image not present or could not be loaded.
[    3.757225] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.206896] random: crng init done
[    5.591136] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    5.742506] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.742693] systemd[1]: Detected architecture x86-64.
[    5.757108] systemd[1]: Set hostname to <nicolasMAO>.
[    7.206055] systemd[1]: Listening on Journal Audit Socket.
[    7.206166] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.206212] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.206270] systemd[1]: Listening on Journal Socket.
[    7.206327] systemd[1]: Listening on udev Control Socket.
[    7.206364] systemd[1]: Listening on udev Kernel Socket.
[    7.206409] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.278803] lp: driver loaded but no devices found
[    8.307480] ppdev: user-space parallel port driver
[    8.542880] fuse init (API version 7.26)
[   10.519498] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.654571] systemd-journald[685]: Received request to flush runtime journal from PID 1
[   11.047441] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[   11.047446] ACPI Warning: SystemIO range 0x0000000000004E00-0x0000000000004E3F conflicts with OpRegion 0x0000000000004E00-0x0000000000004E3F (\_SB.PCI0.SM00) (20160831/utaddress-247)
[   11.047452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.057812] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9
[   11.057818] ACPI: Power Button [PWRB]
[   11.057885] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[   11.057887] ACPI: Sleep Button [SLPB]
[   11.080337] nv_tco: NV TCO WatchDog Timer Driver v0.01
[   11.080446] nv_tco: Watchdog reboot not detected
[   11.080512] nv_tco: initialized (0x4440). heartbeat=30 sec (nowayout=0)
[   11.129276] wmi: Mapper loaded
[   11.173808] ACPI: AC Adapter [AC0] (on-line)
[   11.216496] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11
[   11.227711] ACPI: Battery Slot [BAT0] (battery present)
[   11.375522] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   11.380108] ACPI: Lid Switch [LID]
[   11.380277] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[   11.380281] ACPI: Power Button [PWRF]
[   11.381432] acpi device:2b: registered as cooling_device2
[   11.381527] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:28/LNXVIDEO:00/input/input13
[   11.707289] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[   11.707302] snd_hda_intel 0000:00:08.0: Disabling MSI
[   11.784359] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.784425] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   11.799726] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.311783] asus_laptop: Asus Laptop Support version 0.42
[   12.311903] asus_laptop: BSTS called, 0xff5d returned
[   12.311916] asus_laptop:   K70IO model detected
[   12.312328] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input14
[   12.561096] [drm] Initialized
[   13.007106] intel_powerclamp: No package C-state available
[   13.040464] intel_powerclamp: No package C-state available
[   13.146984] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[   13.181204] media: Linux media interface: v0.10
[   13.194080] ath: phy0: Enable LNA combining
[   13.195504] ath: EEPROM regdomain: 0x60
[   13.195505] ath: EEPROM indicates we should expect a direct regpair map
[   13.195508] ath: Country alpha2 being used: 00
[   13.195509] ath: Regpair used: 0x60
[   13.252805] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.253149] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffb31900af0000, irq=18
[   13.444037] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.444040] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.444042] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   13.444044] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   13.444045] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   13.444047] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   13.444050] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   13.471864] Linux video capture interface: v2.00
[   13.483861] MXM: GUID detected in BIOS
[   13.484000] ACPI Warning: \_SB.PCI0.XVR0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   13.484095] ACPI: \_SB_.PCI0.XVR0.VGA_: failed to evaluate _DSM
[   13.484440] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 17
[   13.484719] nouveau 0000:02:00.0: NVIDIA G96 (096980c1)
[   13.519678] nouveau 0000:02:00.0: bios: version 62.94.79.00.0b
[   13.540895] nouveau 0000:02:00.0: bios: M0203T not found
[   13.540898] nouveau 0000:02:00.0: bios: M0203E not matched!
[   13.540901] nouveau 0000:02:00.0: fb: 1024 MiB DDR2
[   13.572734] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116)
[   13.589069] uvcvideo 1-5:1.0: Entity type for entity Extension 5 was not initialized!
[   13.589074] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   13.589077] uvcvideo 1-5:1.0: Entity type for entity Processing 3 was not initialized!
[   13.589079] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[   13.589286] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input15
[   13.589488] usbcore: registered new interface driver uvcvideo
[   13.589490] USB Video Class driver (1.1.1)
[   13.596420] [TTM] Zone  kernel: Available graphics memory: 2025182 kiB
[   13.596423] [TTM] Initializing pool allocator
[   13.596435] [TTM] Initializing DMA pool allocator
[   13.596469] nouveau 0000:02:00.0: DRM: VRAM: 1024 MiB
[   13.596471] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[   13.596476] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[   13.596478] nouveau 0000:02:00.0: DRM: DCB version 4.0
[   13.596481] nouveau 0000:02:00.0: DRM: DCB outp 00: 01800323 00010034
[   13.596483] nouveau 0000:02:00.0: DRM: DCB outp 01: 02811300 00000028
[   13.596485] nouveau 0000:02:00.0: DRM: DCB outp 02: 04822312 00020010
[   13.596487] nouveau 0000:02:00.0: DRM: DCB conn 00: 00000040
[   13.596489] nouveau 0000:02:00.0: DRM: DCB conn 01: 00000100
[   13.596491] nouveau 0000:02:00.0: DRM: DCB conn 02: 00001261
[   13.596493] nouveau 0000:02:00.0: DRM: DCB conn 07: 00000413
[   13.602377] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.602379] [drm] Driver supports precise vblank timestamp query.
[   13.628605] nouveau 0000:02:00.0: DRM: MM: using CRYPT for buffer copies
[   14.894647] nouveau 0000:02:00.0: DRM: allocated 1600x900 fb: 0x70000, bo ffff93cad9ad3400
[   14.894801] fbcon: nouveaufb (fb0) is primary device
[   15.165260] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
[   15.166263] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
[   15.166489] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
[   15.211426] Adding 6369276k swap on /dev/sda5.  Priority:-1 extents:1 across:6369276k FS
[   15.268292] Console: switching to colour frame buffer device 200x56
[   15.270840] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[   15.284110] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[   28.297310] r8169 0000:03:00.0 eth0: link down
[   31.557592] wlan0: authenticate with 14:0c:76:f8:6d:28
[   31.570471] wlan0: send auth to 14:0c:76:f8:6d:28 (try 1/3)
[   31.572179] wlan0: authenticated
[   31.576055] wlan0: associate with 14:0c:76:f8:6d:28 (try 1/3)
[   31.579418] wlan0: RX AssocResp from 14:0c:76:f8:6d:28 (capab=0x411 status=0 aid=2)
[   31.579532] wlan0: associated
[  128.600021] usb 3-2: new full-speed USB device number 2 using ohci-pci
[  128.830041] usb 3-2: New USB device found, idVendor=0e41, idProduct=4151
[  128.830043] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  128.830045] usb 3-2: Product: UX2
[  128.830047] usb 3-2: Manufacturer: Line 6
[  128.902569] snd_usb_toneport 3-2:1.0: Line 6 POD Studio UX2 found
[  128.909152] ------------[ cut here ]------------
[  128.909183] WARNING: CPU: 0 PID: 2815 at /home/zumbi/linux-4.9.13/drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x39a/0x560 [usbcore]
[  128.909184] transfer buffer not dma capable
[  128.909185] Modules linked in: snd_usb_toneport(+) snd_usb_line6 ctr ccm snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device cpufreq_powersave cpufreq_conservative cpufreq_userspace binfmt_misc snd_hda_codec_hdmi uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core nouveau videodev snd_hda_codec_realtek snd_hda_codec_generic arc4 media ath9k ath9k_common ath9k_hw ath mac80211 coretemp ttm drm_kms_helper kvm_intel drm cfg80211 kvm asus_laptop i2c_algo_bit mxm_wmi sparse_keymap rfkill shpchp sg snd_hda_intel snd_hda_codec snd_hda_core irqbypass snd_hwdep snd_pcm_oss evdev joydev input_polldev snd_mixer_oss serio_raw snd_pcm snd_timer snd soundcore video battery ac wmi nv_tco button i2c_nforce2 acpi_cpufreq tpm_tis tpm_tis_core tpm fuse parport_pc ppdev
[  128.909237]  lp parport autofs4 ext4 crc16 jbd2 fscrypto mbcache crc32c_generic btrfs xor raid6_pq dm_mod sr_mod cdrom sd_mod psmouse ahci libahci r8169 libata mii scsi_mod thermal ohci_pci fjes ohci_hcd ehci_pci ehci_hcd usbcore usb_common
[  128.909259] CPU: 0 PID: 2815 Comm: systemd-udevd Not tainted 4.9.0-0.bpo.2-amd64 #1 Debian 4.9.13-1~bpo8+1
[  128.909260] Hardware name: ASUSTeK Computer Inc.  K70IO               /K70IO     , BIOS 208     06/22/2009
[  128.909262]  0000000000000000 ffffffffa9329cd5 ffffb31901dbf868 0000000000000000
[  128.909265]  ffffffffa90778a4 ffff93cad9712780 ffffb31901dbf8c0 0000000000000000
[  128.909268]  ffffb31901dbfa6c 00000000000000fa 0000000000000002 ffffffffa907791f
[  128.909271] Call Trace:
[  128.909277]  [<ffffffffa9329cd5>] ? dump_stack+0x5c/0x77
[  128.909281]  [<ffffffffa90778a4>] ? __warn+0xc4/0xe0
[  128.909283]  [<ffffffffa907791f>] ? warn_slowpath_fmt+0x5f/0x80
[  128.909293]  [<ffffffffc027b1fa>] ? usb_hcd_map_urb_for_dma+0x39a/0x560 [usbcore]
[  128.909297]  [<ffffffffa90afd57>] ? put_prev_entity+0x77/0x840
[  128.909306]  [<ffffffffc027b5a0>] ? usb_hcd_submit_urb+0x1e0/0xa50 [usbcore]
[  128.909309]  [<ffffffffa902476b>] ? __switch_to+0x2bb/0x700
[  128.909312]  [<ffffffffa95f6695>] ? __schedule+0x245/0x6d0
[  128.909322]  [<ffffffffc027d78d>] ? usb_start_wait_urb+0x6d/0x170 [usbcore]
[  128.909332]  [<ffffffffc027d96c>] ? usb_control_msg+0xdc/0x130 [usbcore]
[  128.909338]  [<ffffffffc0ceec52>] ? line6_read_data+0x102/0x220 [snd_usb_line6]
[  128.909342]  [<ffffffffc0d2149c>] ? toneport_init+0x9c/0x1c5 [snd_usb_toneport]
[  128.909345]  [<ffffffffc0cef1aa>] ? line6_probe+0x24a/0x470 [snd_usb_line6]
[  128.909347]  [<ffffffffc0d21400>] ? line6_toneport_disconnect+0x60/0x60 [snd_usb_toneport]
[  128.909351]  [<ffffffffa9478fa6>] ? __pm_runtime_set_status+0x166/0x270
[  128.909361]  [<ffffffffc0281e42>] ? usb_probe_interface+0x152/0x300 [usbcore]
[  128.909363]  [<ffffffffa946db4e>] ? driver_probe_device+0x21e/0x430
[  128.909365]  [<ffffffffa946de36>] ? __driver_attach+0xd6/0xe0
[  128.909366]  [<ffffffffa946dd60>] ? driver_probe_device+0x430/0x430
[  128.909369]  [<ffffffffa946b7b7>] ? bus_for_each_dev+0x67/0xb0
[  128.909371]  [<ffffffffa946cde0>] ? bus_add_driver+0x40/0x260
[  128.909373]  [<ffffffffa946e827>] ? driver_register+0x57/0xd0
[  128.909383]  [<ffffffffc02807ec>] ? usb_register_driver+0x7c/0x140 [usbcore]
[  128.909384]  [<ffffffffc026d000>] ? 0xffffffffc026d000
[  128.909387]  [<ffffffffa900218c>] ? do_one_initcall+0x4c/0x180
[  128.909388]  [<ffffffffa95f6d54>] ? preempt_schedule_common+0x14/0x20
[  128.909390]  [<ffffffffa95f6d79>] ? _cond_resched+0x19/0x20
[  128.909393]  [<ffffffffa917c3af>] ? do_init_module+0x5a/0x1f1
[  128.909396]  [<ffffffffa9101de9>] ? load_module+0x23c9/0x28f0
[  128.909398]  [<ffffffffa90fe650>] ? __symbol_put+0x60/0x60
[  128.909402]  [<ffffffffa92033a4>] ? vfs_read+0x114/0x130
[  128.909406]  [<ffffffffa92a3e01>] ? security_capable+0x41/0x60
[  128.909408]  [<ffffffffa91024fe>] ? SYSC_finit_module+0x8e/0xe0
[  128.909410]  [<ffffffffa95fb3fb>] ? system_call_fast_compare_end+0xc/0x9b
[  128.909412] ---[ end trace 509009569eeeaaa2 ]---
[  128.909416] snd_usb_toneport 3-2:1.0: receive length failed (error -11)
[  128.911061] snd_usb_toneport 3-2:1.0: read request failed (error -32)
[  128.911071] snd_usb_toneport 3-2:1.0: write request failed (error -11)
[  128.918884] snd_usb_toneport 3-2:1.0: Line 6 POD Studio UX2 now attached
[  128.918914] usbcore: registered new interface driver snd_usb_toneport
root@nicolasMAO:/home/nicolas#


Les dernières lignes sont surlignées en rouge

calixtus06 Articles : 840 utilisateur non connecté
j'ai cru comprendre que tu partais quelques temps..

olinuxx Articles : 18936 utilisateur non connecté France
Il semble qu'il y ait un problème avec le pilote noyau toneport. Essaie avec un (ou des) autre noyau (genre un noyau "BL" librazik") disponible et installable avec synaptic.

calixtus06 Articles : 840 utilisateur non connecté
Salut dans synaptic je cherche BL et Librazik, je vois des headers, des low-kernel. Que dois je choisir ? Et dois éliminer le pilote noyau toneport ? Et si oui comment ?

Image

Image

Merci à toi

calixtus06 Articles : 840 utilisateur non connecté
Olivier si tu passes par là ..pourras tu m'expliquer cette histoire de noyau. Je n'ai pas envie de faire de fausse manip.

olinuxx écrit :
celle-ci me dit qu'il s'agit d'un module du noyau qui est le pilote pour le matériel "TonePort USB". As-tu ce matériel ?

En lien avec un autre post: et bien non , moi j'ai le pod ux2 et non le toneport jusqu'à preuve du contraire


Afficher les articles :
Aller au forum :

Documentation [Afficher / Cacher]

Faire un don
[Afficher / Cacher]

Connexion
[Afficher / Cacher]



Mégaphone [Afficher / Cacher]

calixtus06, 14:33, jeu. 28 mars 2024: Bonjour et bienvenue à b.vl :-)
calixtus06, 09:30, mer. 27 mars 2024: Bonjour et bienvenue à Noar :-)
olinuxx, 18:50, lun. 25 mars 2024: Bonjour et bienvenue à Ted Demore cool
olinuxx, 17:52, dim. 24 mars 2024: Bonjour et bienvenue à Noitavon cool
calixtus06, 11:07, jeu. 21 mars 2024: Bonjour et bienvenue à obds, ceric :-)
obds, 16:12, mar. 19 mars 2024: Cet édito est juste parfait. Trop beau !
olinuxx, 11:48, ven. 15 mars 2024: Bonjour et bienvenue à Jerry cool
calixtus06, 18:03, mer. 13 mars 2024: Bonjour et bienvenue à tanguero :-)
olinuxx, 11:01, dim. 10 mars 2024: Bonjour et bienvenue à lolo cool
bda, 16:59, sam. 09 mars 2024: Chapeau pour l'édito. Vous êtes au top les gars :-)
allany, 07:20, jeu. 07 mars 2024: Ça ne fait jamais de mal, c'est l'éditorial ! [Lien]
olinuxx, 19:52, mer. 06 mars 2024: Bonjour et bienvenue à TrkNrk cool