RTIRQ problème avec rtprio
Bonjour,
Jusqu'ici rtirq fonctionnait sans problème
Et là, voilà que j'entends des Xruns en série, suite à quoi, je vérifie ce qu'il se passe et je vois ceci
Ma carte son :
Bus 003 Device 009: ID 1397:0508 BEHRINGER International GmbH UMC204HD 192k
La rtprio max est à 51.
ulimit est bien configuré, j'utilise le noyal 5.10.21-rt34-xanmod1-1-rt
Et voici mon rtirq.conf
C'est comme si rtirq refusait de dépasser "RTIRQ_PRIO_LOW=51"
Je n'ai pas de problème pour changer la priorité avec chrt, mais c'est juste plus embêtant.
Je sais pas trop quoi faire...
Jusqu'ici rtirq fonctionnait sans problème
Et là, voilà que j'entends des Xruns en série, suite à quoi, je vérifie ce qu'il se passe et je vois ceci
rtirq status PID CLS RTPRIO NI PRI %CPU STAT COMMAND 22 FF 51 - 91 0.1 S ksoftirqd/1 29 FF 51 - 91 0.0 S ksoftirqd/2 36 FF 51 - 91 1.0 S ksoftirqd/3 43 FF 51 - 91 0.0 S ksoftirqd/4 50 FF 51 - 91 0.0 S ksoftirqd/5 57 FF 51 - 91 0.0 S ksoftirqd/6 64 FF 51 - 91 0.0 S ksoftirqd/7 129 FF 51 - 91 0.0 S irq/9-acpi 148 FF 51 - 91 0.0 S irq/16-ehci_hcd 149 FF 51 - 91 0.0 S irq/23-ehci_hcd 150 FF 51 - 91 0.0 S irq/8-rtc0 226 FF 51 - 91 4.7 S irq/36-xhci_hcd 229 FF 51 - 91 0.0 S irq/37-ahci[000 246 FF 51 - 91 0.0 S irq/38-ahci[000 254 FF 51 - 91 0.0 S irq/39-xhci_hcd 255 FF 51 - 91 0.0 S irq/40-xhci_hcd 256 FF 51 - 91 0.0 S irq/41-xhci_hcd 257 FF 51 - 91 0.0 S irq/42-xhci_hcd 258 FF 51 - 91 0.0 S irq/43-xhci_hcd 259 FF 51 - 91 0.0 S irq/44-xhci_hcd 260 FF 51 - 91 0.0 S irq/45-xhci_hcd 261 FF 51 - 91 0.0 S irq/46-xhci_hcd 397 FF 51 - 91 0.0 S irq/18-i801_smb 398 FF 51 - 91 0.0 S irq/47-mei_me 500 FF 51 - 91 0.0 S irq/17-snd_hda_ 977 FF 51 - 91 0.0 S irq/48-enp4s0 978 FF 51 - 91 0.0 S irq/49-enp4s0-T 979 FF 51 - 91 0.0 S irq/50-enp4s0-t 980 FF 51 - 91 0.0 S irq/51-enp4s0-t 981 FF 51 - 91 0.0 S irq/52-enp4s0-t 1085 FF 51 - 91 0.3 S irq/53-nvidia 1086 FF 51 - 91 0.3 S irq/53-s-nvidia 11 FF 17 - 57 0.0 S ksoftirqd/0
Ma carte son :
Bus 003 Device 009: ID 1397:0508 BEHRINGER International GmbH UMC204HD 192k
La rtprio max est à 51.
ulimit est bien configuré, j'utilise le noyal 5.10.21-rt34-xanmod1-1-rt
Et voici mon rtirq.conf
# IRQ thread service names # (space separated list, from higher to lower priority). RTIRQ_NAME_LIST="rtc xhci_hcd snd aloop" # Highest priority. RTIRQ_PRIO_HIGH=90 # Priority decrease step. RTIRQ_PRIO_DECR=5 # Lowest priority. RTIRQ_PRIO_LOW=51 # Whether to reset all IRQ threads to SCHED_OTHER. RTIRQ_RESET_ALL=0 # On kernel configurations that support it, # which services should be NOT threaded # (space separated list). RTIRQ_NON_THREADED="rtc snd" # Process names which will be forced to the # highest realtime priority range (99-91) # (space separated list, from highest to lower priority). #RTIRQ_HIGH_LIST="timer" # Save/restore state file path. #RTIRQ_STATE=/var/run/rtirq.state
C'est comme si rtirq refusait de dépasser "RTIRQ_PRIO_LOW=51"
Je n'ai pas de problème pour changer la priorité avec chrt, mais c'est juste plus embêtant.
Je sais pas trop quoi faire...