Chargement...
 
[Voir/Cacher menus de gauche]
[Voir/Cacher menus de droite]

6 - Le MIDI

> Forums de discussion > 6 - Le MIDI > Connecter synthétiseur Mininova en MIDI sur Jack
Dernier post
Page : 1/5   -   Aller directement à la page : 1  2  3  4  5 

Connecter synthétiseur Mininova en MIDI sur Jack

loupdidg utilisateur non connecté
Bonjour.

Je possède un clavier synthétiseur Mininova que j’aimerai utiliser en MIDI avec Ardour3 mais le soucis c'est qu'il n’apparaît pas sur Jack.

Après avoir lu plusieurs tutos j'ai fait les manip suivantes :

J'ai mis dans Jack "seq" pour les pilotes midi.

J'ai fait la commande "a2j -e".

Voilà ce que j'ai dans Jack Image


Après avoir lu un tuto j'ai tapé la commande "dmesg" ce qui me donne

[    0.453140] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[    0.453180] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.453182] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.453184] usb usb4: Product: UHCI Host Controller
[    0.453185] usb usb4: Manufacturer: Linux 3.13.0-35-lowlatency uhci_hcd
[    0.453187] usb usb4: SerialNumber: 0000:00:1d.2
[    0.453255] hub 4-0:1.0: USB hub found
[    0.453260] hub 4-0:1.0: 2 ports detected
[    0.453370] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.453374] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.453424] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[    0.453464] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.453466] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.453468] usb usb5: Product: UHCI Host Controller
[    0.453469] usb usb5: Manufacturer: Linux 3.13.0-35-lowlatency uhci_hcd
[    0.453471] usb usb5: SerialNumber: 0000:00:1d.3
[    0.453538] hub 5-0:1.0: USB hub found
[    0.453543] hub 5-0:1.0: 2 ports detected
[    0.453651] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.456157] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.456182] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.456267] mousedev: PS/2 mouse device common for all mice
[    0.456396] rtc_cmos 00:02: RTC can wake from S4
[    0.456499] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.456547] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.456609] device-mapper: uevent: version 1.0.3
[    0.456669] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.456676] ledtrig-cpu: registered to indicate activity on CPUs
[    0.456769] TCP: cubic registered
[    0.456846] NET: Registered protocol family 10
[    0.457020] NET: Registered protocol family 17
[    0.457030] Key type dns_resolver registered
[    0.457204] Loading compiled-in X.509 certificates
[    0.458086] Loaded X.509 cert 'Magrathea: Glacier signing key: 4e028aa390eebdf2f29436e3e13d117796cbe36f'
[    0.458101] registered taskstats version 1
[    0.459955] Key type trusted registered
[    0.461454] Key type encrypted registered
[    0.462913] AppArmor: AppArmor sha1 policy hashing enabled
[    0.462916] IMA: No TPM chip found, activating TPM-bypass!
[    0.463136] regulator-dummy: disabling
[    0.463169]   Magic number: 14:302:834
[    0.463293] rtc_cmos 00:02: setting system clock to 2014-09-03 12:49:31 UTC (1409748571)
[    0.463355] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.463356] EDD information not available.
[    0.463384] PM: Hibernation image not present or could not be loaded.
[    0.620009] ata3.01: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[    0.622374] ata4.01: ATA-8: ST3500418AS, CC46, max UDMA/133
[    0.622380] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.626170] ata3.01: configured for UDMA/100
[    0.628373] ata4.01: configured for UDMA/133
[    0.635489] scsi 2:0:1:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN03 PQ: 0 ANSI: 5
[    0.644637] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.644642] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.644806] sr 2:0:1:0: Attached scsi CD-ROM sr0
[    0.644872] sr 2:0:1:0: Attached scsi generic sg0 type 5
[    0.644970] scsi 3:0:1:0: Direct-Access     ATA      ST3500418AS      CC46 PQ: 0 ANSI: 5
[    0.645064] sd 3:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.645071] sd 3:0:1:0: Attached scsi generic sg1 type 0
[    0.645110] sd 3:0:1:0: [sda] Write Protect is off
[    0.645112] sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    0.645141] sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.701236]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    0.701641] sd 3:0:1:0: [sda] Attached SCSI disk
[    0.702853] Freeing unused kernel memory: 1324K (ffffffff81d1d000 - ffffffff81e68000)
[    0.702855] Write protecting the kernel read-only data: 12288k
[    0.704921] Freeing unused kernel memory: 792K (ffff88000173a000 - ffff880001800000)
[    0.706696] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    0.716961] systemd-udevd[130]: starting version 204
[    0.747326] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.747339] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.747735] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[    0.747895] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc9000035e000, 20:cf:30:dd:c3:43, XID 083000c0 IRQ 43
[    0.747897] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.280854] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    1.363046] usb 1-7: new high-speed USB device number 6 using ehci-pci
[    1.372027] tsc: Refined TSC clocksource calibration: 3024.783 MHz
[    2.055157] usb 1-7: New USB device found, idVendor=0bda, idProduct=0158
[    2.055163] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.055168] usb 1-7: Product: USB2.0-CRW
[    2.055172] usb 1-7: Manufacturer: Generic
[    2.055175] usb 1-7: SerialNumber: 20060413092100000
[    2.372083] Switched to clocksource tsc
[    2.479516] random: nonblocking pool is initialized
[    2.678043] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    2.987192] usb 4-2: New USB device found, idVendor=08bb, idProduct=2900
[    2.987199] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.987203] usb 4-2: Product: USB Audio CODEC 
[    2.987207] usb 4-2: Manufacturer: Burr-Brown from TI              
[    3.092037] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    3.494055] usb 2-1: New USB device found, idVendor=1c4f, idProduct=0002
[    3.494061] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.494066] usb 2-1: Product: USB Keykoard
[    3.494070] usb 2-1: Manufacturer: USB
[    3.703038] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[    3.867059] usb 2-2: New USB device found, idVendor=046d, idProduct=c05b
[    3.867066] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.867071] usb 2-2: Product: USB Optical Mouse
[    3.867075] usb 2-2: Manufacturer: Logitech
[    3.972043] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    4.321059] usb 3-2: New USB device found, idVendor=1235, idProduct=001e
[    4.321067] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.321071] usb 3-2: Product: MiniNova
[    4.321075] usb 3-2: Manufacturer: Focusrite A.E. Ltd
[    5.448620] Adding 2094076k swap on /dev/sda6.  Priority:-1 extents:1 across:2094076k FS
[    6.196327] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.464418] systemd-udevd[295]: starting version 204
[    7.434393] lp: driver loaded but no devices found
[    7.513897] ppdev: user-space parallel port driver
[    7.564556] parport_pc 00:05: reported by Plug and Play ACPI
[    7.564658] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    7.647204] lp0: using parport0 (interrupt-driven).
[    8.405114] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[    9.805412] intel_rng: FWH not detected
[   10.075746] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[   10.075752] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.075754] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[   10.075757] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.075758] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.278580] leds_ss4200: no LED devices found
[   11.049470] [drm] Initialized drm 1.1.0 20060810
[   11.226386] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   11.344588] autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[   11.344592]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.344593]    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[   11.344594]    mono: mono_out=0x0
[   11.344595]    dig-out=0x20/0x0
[   11.344596]    inputs:
[   11.344598]      Rear Mic=0x1a
[   11.344599]      Front Mic=0x1e
[   11.344600]      Line=0x1b
[   11.349995] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.350070] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.350113] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   11.350159] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   11.350210] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   11.350459] hda_intel: Disabling MSI
[   11.350466] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   11.350543] hda-intel 0000:01:00.1: Disabling 64bit DMA
[   11.353798] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[   11.407968] hidraw: raw HID events driver (C) Jiri Kosina
[   11.432461] wmi: Mapper loaded
[   11.680333] usbcore: registered new interface driver usbhid
[   11.680337] usbhid: USB HID core driver
[   11.699540] usbcore: registered new interface driver snd-usb-audio
[   11.761160] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   11.761254] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   11.761306] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   11.761352] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[   11.905653] usbcore: registered new interface driver usb-storage
[   11.937136] ums-realtek 1-7:1.0: USB Mass Storage device detected
[   11.939810] scsi4 : usb-storage 1-7:1.0
[   11.939960] usbcore: registered new interface driver ums-realtek
[   12.118935] checking generic (df000000 130000) vs hw (e0000000 10000000)
[   12.118936] checking generic (df000000 130000) vs hw (de000000 2000000)
[   12.118937] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   12.131395] Console: switching to colour dummy device 80x25
[   12.133187] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0a8280b1
[   12.133190] nouveau  [  DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[   12.133192] nouveau  [  DEVICE][0000:01:00.0] Family : NV50
[   12.134213] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   12.289385] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   12.289390] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[   12.289478] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   12.289481] nouveau  [   VBIOS][0000:01:00.0] version 70.18.2d.00.00
[   12.309257] input: Burr-Brown from TI               USB Audio CODEC  as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.3/input/input14
[   12.309485] hid-generic 0003:08BB:2900.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI               USB Audio CODEC ] on usb-0000:00:1d.2-2/input3
[   12.309726] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input15
[   12.312652] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1/input0
[   12.312907] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input16
[   12.313825] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[   12.313838] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[   12.313927] nouveau W[     PFB][0000:01:00.0][0x00000000][ffff88007a82a000] reclocking of this ram type unsupported
[   12.313930] nouveau  [     PFB][0000:01:00.0] RAM type: DDR2
[   12.313932] nouveau  [     PFB][0000:01:00.0] RAM size: 512 MiB
[   12.313933] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 960 tags
[   12.314681] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1/input1
[   12.314889] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input17
[   12.315199] hid-generic 0003:046D:C05B.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[   12.320195] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
[   12.893570] type=1400 audit(1409741383.928:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=473 comm="apparmor_parser"
[   12.893577] type=1400 audit(1409741383.928:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser"
[   12.893581] type=1400 audit(1409741383.928:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
[   12.893944] type=1400 audit(1409741383.928:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser"
[   12.893949] type=1400 audit(1409741383.928:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
[   12.894144] type=1400 audit(1409741383.929:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
[   12.894980] type=1400 audit(1409741383.929:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=430 comm="apparmor_parser"
[   12.894986] type=1400 audit(1409741383.929:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=430 comm="apparmor_parser"
[   12.894990] type=1400 audit(1409741383.929:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=430 comm="apparmor_parser"
[   12.895359] type=1400 audit(1409741383.930:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=430 comm="apparmor_parser"
[   12.952539] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[   12.952755] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   12.955295] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[   12.960035] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[   12.960044] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   12.960047] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   12.960078] nouveau  [     CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[   12.960081] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[   12.960084] nouveau  [     CLK][0000:01:00.0] 0f: core 589 MHz shader 1402 MHz memory 400 MHz
[   12.960101] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[   12.960255] [TTM] Zone  kernel: Available graphics memory: 1024622 kiB
[   12.960257] [TTM] Initializing pool allocator
[   12.960261] [TTM] Initializing DMA pool allocator
[   12.960270] nouveau  [     DRM] VRAM: 512 MiB
[   12.960271] nouveau  [     DRM] GART: 1048576 MiB
[   12.960276] nouveau  [     DRM] TMDS table version 2.0
[   12.960277] nouveau  [     DRM] DCB version 4.0
[   12.960279] nouveau  [     DRM] DCB outp 00: 02000300 00000000
[   12.960281] nouveau  [     DRM] DCB outp 01: 01000302 00020030
[   12.960283] nouveau  [     DRM] DCB outp 02: 02011362 00020010
[   12.960284] nouveau  [     DRM] DCB outp 03: 01022310 00000000
[   12.960286] nouveau  [     DRM] DCB conn 00: 00001030
[   12.960288] nouveau  [     DRM] DCB conn 01: 00002161
[   12.960289] nouveau  [     DRM] DCB conn 02: 00000200
[   12.972278] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.972282] [drm] No driver support for vblank timestamp query.
[   12.997030] nouveau  [     DRM] MM: using COPY for buffer copies
[   13.041685] nouveau  [     DRM] allocated 1920x1080 fb: 0x70000, bo ffff880079796c00
[   13.041843] fbcon: nouveaufb (fb0) is primary device
[   13.120699] Console: switching to colour frame buffer device 240x67
[   13.127103] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   13.127105] nouveau 0000:01:00.0: registered panic notifier
[   13.127114] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[   14.279464] init: failsafe main process (523) killed by TERM signal
[   18.049074] Bluetooth: Core ver 2.17
[   18.049121] NET: Registered protocol family 31
[   18.049123] Bluetooth: HCI device and connection manager initialized
[   18.049139] Bluetooth: HCI socket layer initialized
[   18.049141] Bluetooth: L2CAP socket layer initialized
[   18.049145] Bluetooth: SCO socket layer initialized
[   18.330235] Bluetooth: RFCOMM TTY layer initialized
[   18.330249] Bluetooth: RFCOMM socket layer initialized
[   18.330256] Bluetooth: RFCOMM ver 1.11
[   18.435566] init: cups main process (720) killed by HUP signal
[   18.435578] init: cups main process ended, respawning
[   18.524523] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.524527] Bluetooth: BNEP filters: protocol multicast
[   18.524540] Bluetooth: BNEP socket layer initialized
[   24.378332] r8169 0000:02:00.0 eth0: link down
[   24.378338] r8169 0000:02:00.0 eth0: link down
[   24.378375] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.378679] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.441726] r8169 0000:02:00.0 eth0: link up
[   26.441740] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   27.263237] audit_printk_skb: 15 callbacks suppressed
[   27.263240] type=1400 audit(1409741398.298:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=895 comm="apparmor_parser"
[   27.263247] type=1400 audit(1409741398.298:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=895 comm="apparmor_parser"
[   27.263608] type=1400 audit(1409741398.298:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=895 comm="apparmor_parser"
[   27.264001] type=1400 audit(1409741398.298:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=896 comm="apparmor_parser"
[   27.264019] type=1400 audit(1409741398.299:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=896 comm="apparmor_parser"
[   27.264283] type=1400 audit(1409741398.299:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=896 comm="apparmor_parser"
[   27.267798] type=1400 audit(1409741398.302:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=900 comm="apparmor_parser"
[   27.267806] type=1400 audit(1409741398.302:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser"
[   27.267810] type=1400 audit(1409741398.302:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser"
[   27.268197] type=1400 audit(1409741398.303:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser"
[   27.395353] init: samba-ad-dc main process (781) terminated with status 1
[   28.679493] init: nvidia-prime main process (971) terminated with status 127
[   36.197670] init: plymouth-upstart-bridge main process ended, respawning
[   36.207632] init: plymouth-upstart-bridge main process ended, respawning
[   48.128763] audit_printk_skb: 141 callbacks suppressed
[   48.128767] type=1400 audit(1409741419.163:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1694 comm="apparmor_parser"
[   48.128774] type=1400 audit(1409741419.163:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1694 comm="apparmor_parser"
[   48.129167] type=1400 audit(1409741419.164:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1694 comm="apparmor_parser"
[   65.785624] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[   65.787249] sd 4:0:0:0: [sdb] Asking for cache data failed
[   65.787255] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  118.009500] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  118.011124] sd 4:0:0:0: [sdb] Asking for cache data failed
[  118.011130] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  170.233614] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  170.235238] sd 4:0:0:0: [sdb] Asking for cache data failed
[  170.235245] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  222.457443] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  222.459080] sd 4:0:0:0: [sdb] Asking for cache data failed
[  222.459087] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  274.681603] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  274.683121] sd 4:0:0:0: [sdb] Asking for cache data failed
[  274.683127] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  326.905360] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  326.906987] sd 4:0:0:0: [sdb] Asking for cache data failed
[  326.906992] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  379.129538] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  379.131164] sd 4:0:0:0: [sdb] Asking for cache data failed
[  379.131171] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  431.353508] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  431.355132] sd 4:0:0:0: [sdb] Asking for cache data failed
[  431.355139] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  483.577135] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  483.578757] sd 4:0:0:0: [sdb] Asking for cache data failed
[  483.578769] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  535.801184] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  535.802801] sd 4:0:0:0: [sdb] Asking for cache data failed
[  535.802808] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  588.025270] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  588.026890] sd 4:0:0:0: [sdb] Asking for cache data failed
[  588.026898] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  640.249176] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  640.250786] sd 4:0:0:0: [sdb] Asking for cache data failed
[  640.250790] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  692.473199] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  692.474815] sd 4:0:0:0: [sdb] Asking for cache data failed
[  692.474822] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  719.148489] perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  744.697028] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  744.698654] sd 4:0:0:0: [sdb] Asking for cache data failed
[  744.698657] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  796.921137] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  796.922761] sd 4:0:0:0: [sdb] Asking for cache data failed
[  796.922767] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  849.145009] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  849.146635] sd 4:0:0:0: [sdb] Asking for cache data failed
[  849.146642] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  849.257030] usb 1-7: reset high-speed USB device number 6 using ehci-pci
[  875.454070] usb 3-2: USB disconnect, device number 2
[  901.881088] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  901.882709] sd 4:0:0:0: [sdb] Asking for cache data failed
[  901.882716] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  954.105054] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  954.106573] sd 4:0:0:0: [sdb] Asking for cache data failed
[  954.106580] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1006.329044] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1006.330658] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1006.330665] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1058.553123] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1058.554867] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1058.554874] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1110.777458] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1110.779077] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1110.779088] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1163.001111] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1163.002750] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1163.002756] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1181.782047] usb 3-2: new full-speed USB device number 3 using uhci_hcd
[ 1181.928914] usb 3-2: New USB device found, idVendor=1235, idProduct=001e
[ 1181.928923] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1181.928927] usb 3-2: Product: MiniNova
[ 1181.928931] usb 3-2: Manufacturer: Focusrite A.E. Ltd
[ 1215.225214] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1215.226823] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1215.226830] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1267.449207] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1267.450833] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1267.450841] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1269.832053] usb 1-7: reset high-speed USB device number 6 using ehci-pci
[ 1320.185094] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1320.186716] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1320.186720] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1372.409153] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1372.410785] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1372.410792] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1424.634180] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1424.635812] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1424.635819] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1476.857160] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1476.858783] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1476.858789] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1476.980052] usb 1-7: reset high-speed USB device number 6 using ehci-pci
[ 1529.593190] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1529.594800] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1529.594807] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1529.707045] usb 1-7: reset high-speed USB device number 6 using ehci-pci
[ 1582.329124] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1582.330760] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1582.330764] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1634.553352] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1634.554970] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1634.554977] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1686.776983] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1686.778604] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1686.778610] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1739.513078] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1739.514679] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1739.514686] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1791.737123] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1791.738733] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1791.738739] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1843.961017] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1843.962627] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1843.962633] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1896.185134] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1896.186750] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1896.186757] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1948.409147] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1948.410756] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1948.410763] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2000.633098] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2000.634724] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2000.634730] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2052.857148] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2052.858877] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2052.858884] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2105.081146] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2105.082776] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2105.082784] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2157.305072] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2157.306695] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2157.306701] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2209.529213] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2209.530827] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2209.530834] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2236.488055] usb 1-7: reset high-speed USB device number 6 using ehci-pci
[ 2262.265106] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2262.266727] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2262.266734] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2314.489090] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2314.490710] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2314.490716] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2366.713120] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2366.714743] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2366.714750] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2418.937001] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2418.938623] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 2418.938630] sd 4:0:0:0: [sdb] Assuming drive cache: write through


Au milieu de tout ça il y a une ligne : usb 3-2: Product: MiniNova (j'ai pas réussi à la changer de couleur pour la trouver plus facilement)

Ensuite avec la commande "lsmod" :

Module                  Size  Used by
snd_hrtimer            12744  1 
snd_seq_dummy          12798  2 
bnep                   19624  2 
rfcomm                 69160  0 
bluetooth             395387  10 bnep,rfcomm
joydev                 17332  0 
hid_generic            12548  0 
nouveau              1097199  3 
ums_realtek            18029  0 
usb_storage            57966  1 ums_realtek
snd_hda_codec_hdmi     46368  4 
snd_usb_audio         153617  5 
usbhid                 48425  0 
mxm_wmi                13021  1 nouveau
snd_usbmidi_lib        25070  1 snd_usb_audio
wmi                    19177  2 mxm_wmi,nouveau
hid                   106148  2 hid_generic,usbhid
snd_hda_codec_via      27860  1 
video                  19476  1 nouveau
ttm                    85115  1 nouveau
snd_hda_intel          52306  5 
drm_kms_helper         53081  1 nouveau
snd_hda_codec         192906  3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
drm                   303102  5 ttm,drm_kms_helper,nouveau
coretemp               13435  0 
snd_hwdep              13602  2 snd_usb_audio,snd_hda_codec
snd_pcm               102040  6 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
kvm_intel             143104  0 
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
kvm                   451444  1 kvm_intel
snd_seq_midi           13324  0 
snd_seq_midi_event     14899  1 snd_seq_midi
i2c_algo_bit           13413  1 nouveau
snd_rawmidi            30095  2 snd_usbmidi_lib,snd_seq_midi
snd_seq                61560  11 snd_seq_midi_event,snd_seq_dummy,snd_seq_midi
snd_seq_device         14497  4 snd_seq,snd_rawmidi,snd_seq_dummy,snd_seq_midi
snd_timer              29433  3 snd_hrtimer,snd_pcm,snd_seq
snd                    69273  35 snd_hrtimer,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_dummy,snd_seq_midi
serio_raw              13413  0 
soundcore              12680  1 snd
lpc_ich                21080  0 
binfmt_misc            17468  1 
asus_atk0110           18657  0 
mac_hid                13205  0 
parport_pc             32701  1 
ppdev                  17671  0 
lp                     17759  0 
parport                42299  3 lp,ppdev,parport_pc
psmouse               102533  0 
r8169                  67581  0 
mii                    13934  1 r8169



Mais bon je sais pas trop comment analyser tout ça !
Bref, Jack ne trouve pas mon clavier. J'espère que c'est possible de le faire fonctionner en MIDI ?!

Essais voir ce que donne ça:

lsusb


Je pense à un problème d'ordre de périphérique et essais de voir si en branchant avant ou après le boot de la machine voir s'il apparaît dans l'onglet alsa (pour a2j -e" tu verras après.

loupdidg utilisateur non connecté
Bus 001 Device 006: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 08bb:2900 Texas Instruments PCM2900 Audio Codec
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1235:001e Novation EMS 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046d:c05b Logitech, Inc. M-U0004 810-001317 [B110 Optical USB Mouse]
Bus 002 Device 002: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Y a une ligne Novation c'est la marque du synthé.

essais d'intervertir les prise usb pour voir dans un temps sinon je pense qu'il va falloir fixer l'orde des cartes car farfois il arrive qu'en la présence de deux périf' usb l'un annule l'autre j'ai déja vu ça chez moi .

Sort nous un résultat de ces deux commandes:

cat /proc/asound/cards

cat /proc/asound/modules

ainsi que ceci:
gedit /etc/modprobe.d/alsa-base.conf


loupdidg utilisateur non connecté
Alors dans le même ordre :

0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xfcffc000 irq 44
 1 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xfeafc000 irq 17
 2 [CODEC          ]: USB-Audio - USB Audio CODEC
                      Burr-Brown from TI USB Audio CODEC at usb-0000:00:1d.2-2, full speed


0 snd_hda_intel
 1 snd_hda_intel
 2 snd_usb_audio


Et dans le fichier

# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7

# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
#
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
#
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }

# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2


Hmm j'ai dans l'idée qu'on va s'amuser 5 minutes .
Déja commence par désactiver ta carte son interne depuis le bios

Une foi que c'est fait renvois ce qui disent :
cat /proc/asound/cards

et
cat /proc/asound/modules

Tout ça sans brancher ta carte son Allen and Heath ZED-10FX de sorte à isoler au mieux le problème.
Le reste on verra après ;)

loupdidg utilisateur non connecté
Ok, il va falloir me dire comment on procède pour faire ça dans le bios ^^ !

Et je pense prendre le temps de faire tout ça tranquillement plus tard dans la semaine...

Vous pensez que c'est réalisable de connecter en USB ce synthé et que Ardour3 le prenne en MIDI ?

Justement faut déjà voir s'il est pris en charge (sûrement) et de faire la config' qui va bien ;)

loupdidg utilisateur non connecté
Bonsoir.

J'ai testé par hasard de connecter mon synthé sur un port USB en façade et j'ai une nouvelle connexion dans l'onglet MIDI de Jack "midi_capture_1" et d'après se que j'ai lu dans le forum ça serait peut être mon clavier ?! Mais j'ai fait les connexions comme sur le tuto et ça fonctionne pas mais bon je me plante sûrement quelque part !

olinuxx utilisateur non connecté France
loupdidg écrit :
Mais j'ai fait les connexions comme sur le tuto et ça fonctionne pas mais bon je me plante sûrement quelque part !


Quel Tuto ?

olinuxx utilisateur non connecté France
informationinfo
J'ai corrigé le lien dans ton message. Voir le manuel du site


Je ne suis pas spécialiste de ceci, je vais donc laisser d'autres te répondre.

Oui mais il semble que tu veuille brûler les étapes je repeat :

Citation :
Hmm j'ai dans l'idée qu'on va s'amuser 5 minutes .
Déja commence par désactiver ta carte son interne depuis le bios

Une foi que c'est fait renvois ce qui disent :
cat /proc/asound/cards

et
cat /proc/asound/modules

Tout ça sans brancher ta carte son Allen and Heath ZED-10FX de sorte à isoler au mieux le problème.
Le reste on verra après ;)


Si on n'arrive pas à savoir si ta carte midi est reconnu ou non il est clair et net que tu ne pourras la conecter à ardour donc le tuto ne sera d'aucune utilité pour le moment.

Le but est de savoir si ton Interface MIDI est reconnue ou non mais pour le savoir je te demande de commencer par le début et non par la fin c'est certainement la meilleurs façon de faire même pour les "sans dents" que nous sommes.

loupdidg utilisateur non connecté
Ok, c'est juste qu'en voyant cette nouvelle option dans Jack j'ai eu un instant l’espoir que ce soit simple ^^ , bref...

Carte son désactivée dans le BIOS.

0 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xfeafc000 irq 17



0 snd_hda_intel


D'accord et ta carte midi est branchée ou non ?

loupdidg utilisateur non connecté
Excuse moi mais je crois que c'est moi qui comprend pas mais je pensai que le synthé branché en USB suffisait pour fonctionner mais j'ai l'impression que tu me dis qu'il faut une carte midi autre en rajout sur le pc ?

oups pardon je reformule:

Est ce que ton synthé (usb) est branché ou non ?

loupdidg utilisateur non connecté
Oui il est connecté en usb.

Ok

Alors voilà ce que tu vas faire

Dans jack pour l'instant tu va le réglé sur la carte son snd_hda_intel le temps de véréfier que le synthé soit bien pris en charge .
(Parfois deux périphe usb empiètent l'un sur l'autre j'ai déja eu le cas ici)
Tu relance jack qui devra donc démarrer logiquement sans problème particulier.

Ensuite dans les onglets MIDI et ALSA voir s'il y a ou non un périphérique externe. un truc du snd-usb-midi ou quelmques chose de ce style.

Deux petit captures seront les bienvenues.

Et renvoi ce que retournent ces trois commandes :
lsusb

cat /proc/asound/cards

cat /proc/asound/modules


loupdidg utilisateur non connecté
Je suppose que c'est dans interface qu'il faut mettre hw:intel. Mais jack ne démarre pas.

Page : 1/5  [Suivant]
1  2  3  4  5 
Afficher les articles :
Aller au forum :

Documentation [Afficher / Cacher]

Connexion
[Afficher / Cacher]


Mégaphone [Afficher / Cacher]

olinuxx, 23:05, mar. 02 Jun 2020: Bonjour et bienvenue à LeLapin cool
olinuxx, 23:50, lun. 01 Jun 2020: Bonjour et bienvenue à emberger cool
sub26nico, 10:26, dim. 31 mai 2020: Salut et bienvenue à billybilly2 :-)
moncopainalain, 11:19, sam. 30 mai 2020: Confiné,j'ai écris Homescape, l'idée c'est d'enregistrer des sons pour faire de l’électro : [Lien] ça tourne sur pure data ou sur android en téléchargeant l'apk avec script fourni... Partagez. contactez moi.
olof, 09:15, jeu. 28 mai 2020: Ardour 6 est sorti.
olinuxx, 16:40, mar. 26 mai 2020: Bonjour et bienvenue à Jean Emberger et à JazzAddict cool
Sahaathyva, 23:49, lun. 25 mai 2020: ok pour la 1.3 , celle qui est censée supporter l'audio ;) @r1: lmms est mis de coté pour ma part à l'heure actuelle. là j'essaie d'aider Alex pour ZRythm mais dans la mesure de mes simples compétences
r1, 22:47, lun. 25 mai 2020: @Sahaathyva : Pour accélérer le mouvement, tu peux aussi participer au développement de lmms ! :-)
r1, 22:45, lun. 25 mai 2020: Excellente nouvelle pour lmms ! Et pour Ardour aussi d'ailleurs :-D
sub26nico, 21:21, lun. 25 mai 2020: ardour.org semble être redevenu fonctionnel, mais pas encore le forum
ycollet, 20:44, lun. 25 mai 2020: Aucune idée ... J'imagine plutôt une 1.3.0
Sahaathyva, 18:01, lun. 25 mai 2020: Desole pour les fautes de frappe je hais les claviers tactiles. Sinon ycollet c est annonce pour la 1.2.2 les lv2?