Connecter synthétiseur Mininova en MIDI sur Jack
Je possède un clavier synthétiseur Mininova que j’aimerai utiliser en MIDI avec Ardour3 mais le soucis c'est qu'il n’apparaît pas sur Jack.
Après avoir lu plusieurs tutos j'ai fait les manip suivantes :
J'ai mis dans Jack "seq" pour les pilotes midi.
J'ai fait la commande "a2j -e".
Voilà ce que j'ai dans Jack
Après avoir lu un tuto j'ai tapé la commande "dmesg" ce qui me donne
Copy to clipboard
[ 0.453140] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880 [ 0.453180] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.453182] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.453184] usb usb4: Product: UHCI Host Controller [ 0.453185] usb usb4: Manufacturer: Linux 3.13.0-35-lowlatency uhci_hcd [ 0.453187] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.453255] hub 4-0:1.0: USB hub found [ 0.453260] hub 4-0:1.0: 2 ports detected [ 0.453370] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.453374] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.453424] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00 [ 0.453464] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.453466] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.453468] usb usb5: Product: UHCI Host Controller [ 0.453469] usb usb5: Manufacturer: Linux 3.13.0-35-lowlatency uhci_hcd [ 0.453471] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.453538] hub 5-0:1.0: USB hub found [ 0.453543] hub 5-0:1.0: 2 ports detected [ 0.453651] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.456157] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.456182] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.456267] mousedev: PS/2 mouse device common for all mice [ 0.456396] rtc_cmos 00:02: RTC can wake from S4 [ 0.456499] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.456547] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.456609] device-mapper: uevent: version 1.0.3 [ 0.456669] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.456676] ledtrig-cpu: registered to indicate activity on CPUs [ 0.456769] TCP: cubic registered [ 0.456846] NET: Registered protocol family 10 [ 0.457020] NET: Registered protocol family 17 [ 0.457030] Key type dns_resolver registered [ 0.457204] Loading compiled-in X.509 certificates [ 0.458086] Loaded X.509 cert 'Magrathea: Glacier signing key: 4e028aa390eebdf2f29436e3e13d117796cbe36f' [ 0.458101] registered taskstats version 1 [ 0.459955] Key type trusted registered [ 0.461454] Key type encrypted registered [ 0.462913] AppArmor: AppArmor sha1 policy hashing enabled [ 0.462916] IMA: No TPM chip found, activating TPM-bypass! [ 0.463136] regulator-dummy: disabling [ 0.463169] Magic number: 14:302:834 [ 0.463293] rtc_cmos 00:02: setting system clock to 2014-09-03 12:49:31 UTC (1409748571) [ 0.463355] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.463356] EDD information not available. [ 0.463384] PM: Hibernation image not present or could not be loaded. [ 0.620009] ata3.01: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100 [ 0.622374] ata4.01: ATA-8: ST3500418AS, CC46, max UDMA/133 [ 0.622380] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.626170] ata3.01: configured for UDMA/100 [ 0.628373] ata4.01: configured for UDMA/133 [ 0.635489] scsi 2:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5 [ 0.644637] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.644642] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.644806] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 0.644872] sr 2:0:1:0: Attached scsi generic sg0 type 5 [ 0.644970] scsi 3:0:1:0: Direct-Access ATA ST3500418AS CC46 PQ: 0 ANSI: 5 [ 0.645064] sd 3:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.645071] sd 3:0:1:0: Attached scsi generic sg1 type 0 [ 0.645110] sd 3:0:1:0: [sda] Write Protect is off [ 0.645112] sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 0.645141] sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.701236] sda: sda1 sda2 sda3 < sda5 sda6 > [ 0.701641] sd 3:0:1:0: [sda] Attached SCSI disk [ 0.702853] Freeing unused kernel memory: 1324K (ffffffff81d1d000 - ffffffff81e68000) [ 0.702855] Write protecting the kernel read-only data: 12288k [ 0.704921] Freeing unused kernel memory: 792K (ffff88000173a000 - ffff880001800000) [ 0.706696] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000) [ 0.716961] systemd-udevd[130]: starting version 204 [ 0.747326] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.747339] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.747735] r8169 0000:02:00.0: irq 43 for MSI/MSI-X [ 0.747895] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc9000035e000, 20:cf:30:dd:c3:43, XID 083000c0 IRQ 43 [ 0.747897] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.280854] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 1.363046] usb 1-7: new high-speed USB device number 6 using ehci-pci [ 1.372027] tsc: Refined TSC clocksource calibration: 3024.783 MHz [ 2.055157] usb 1-7: New USB device found, idVendor=0bda, idProduct=0158 [ 2.055163] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.055168] usb 1-7: Product: USB2.0-CRW [ 2.055172] usb 1-7: Manufacturer: Generic [ 2.055175] usb 1-7: SerialNumber: 20060413092100000 [ 2.372083] Switched to clocksource tsc [ 2.479516] random: nonblocking pool is initialized [ 2.678043] usb 4-2: new full-speed USB device number 2 using uhci_hcd [ 2.987192] usb 4-2: New USB device found, idVendor=08bb, idProduct=2900 [ 2.987199] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.987203] usb 4-2: Product: USB Audio CODEC [ 2.987207] usb 4-2: Manufacturer: Burr-Brown from TI [ 3.092037] usb 2-1: new low-speed USB device number 2 using uhci_hcd [ 3.494055] usb 2-1: New USB device found, idVendor=1c4f, idProduct=0002 [ 3.494061] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.494066] usb 2-1: Product: USB Keykoard [ 3.494070] usb 2-1: Manufacturer: USB [ 3.703038] usb 2-2: new low-speed USB device number 3 using uhci_hcd [ 3.867059] usb 2-2: New USB device found, idVendor=046d, idProduct=c05b [ 3.867066] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.867071] usb 2-2: Product: USB Optical Mouse [ 3.867075] usb 2-2: Manufacturer: Logitech [ 3.972043] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 4.321059] usb 3-2: New USB device found, idVendor=1235, idProduct=001e [ 4.321067] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.321071] usb 3-2: Product: MiniNova [ 4.321075] usb 3-2: Manufacturer: Focusrite A.E. Ltd [ 5.448620] Adding 2094076k swap on /dev/sda6. Priority:-1 extents:1 across:2094076k FS [ 6.196327] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.464418] systemd-udevd[295]: starting version 204 [ 7.434393] lp: driver loaded but no devices found [ 7.513897] ppdev: user-space parallel port driver [ 7.564556] parport_pc 00:05: reported by Plug and Play ACPI [ 7.564658] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 7.647204] lp0: using parport0 (interrupt-driven). [ 8.405114] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 9.805412] intel_rng: FWH not detected [ 10.075746] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251) [ 10.075752] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.075754] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251) [ 10.075757] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.075758] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 10.278580] leds_ss4200: no LED devices found [ 11.049470] [drm] Initialized drm 1.1.0 20060810 [ 11.226386] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 11.344588] autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line [ 11.344592] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.344593] hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 11.344594] mono: mono_out=0x0 [ 11.344595] dig-out=0x20/0x0 [ 11.344596] inputs: [ 11.344598] Rear Mic=0x1a [ 11.344599] Front Mic=0x1e [ 11.344600] Line=0x1b [ 11.349995] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 11.350070] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 11.350113] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 11.350159] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 11.350210] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 11.350459] hda_intel: Disabling MSI [ 11.350466] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 11.350543] hda-intel 0000:01:00.1: Disabling 64bit DMA [ 11.353798] hda-intel 0000:01:00.1: Enable delay in RIRB handling [ 11.407968] hidraw: raw HID events driver (C) Jiri Kosina [ 11.432461] wmi: Mapper loaded [ 11.680333] usbcore: registered new interface driver usbhid [ 11.680337] usbhid: USB HID core driver [ 11.699540] usbcore: registered new interface driver snd-usb-audio [ 11.761160] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 11.761254] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 11.761306] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 11.761352] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10 [ 11.905653] usbcore: registered new interface driver usb-storage [ 11.937136] ums-realtek 1-7:1.0: USB Mass Storage device detected [ 11.939810] scsi4 : usb-storage 1-7:1.0 [ 11.939960] usbcore: registered new interface driver ums-realtek [ 12.118935] checking generic (df000000 130000) vs hw (e0000000 10000000) [ 12.118936] checking generic (df000000 130000) vs hw (de000000 2000000) [ 12.118937] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver [ 12.131395] Console: switching to colour dummy device 80x25 [ 12.133187] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8280b1 [ 12.133190] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8) [ 12.133192] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 12.134213] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 12.289385] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 12.289390] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN [ 12.289478] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 12.289481] nouveau [ VBIOS][0000:01:00.0] version 70.18.2d.00.00 [ 12.309257] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.3/input/input14 [ 12.309485] hid-generic 0003:08BB:2900.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:1d.2-2/input3 [ 12.309726] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input15 [ 12.312652] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1/input0 [ 12.312907] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input16 [ 12.313825] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X [ 12.313838] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled [ 12.313927] nouveau W[ PFB][0000:01:00.0][0x00000000][ffff88007a82a000] reclocking of this ram type unsupported [ 12.313930] nouveau [ PFB][0000:01:00.0] RAM type: DDR2 [ 12.313932] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB [ 12.313933] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags [ 12.314681] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1/input1 [ 12.314889] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input17 [ 12.315199] hid-generic 0003:046D:C05B.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 12.320195] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv [ 12.893570] type=1400 audit(1409741383.928:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=473 comm="apparmor_parser" [ 12.893577] type=1400 audit(1409741383.928:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser" [ 12.893581] type=1400 audit(1409741383.928:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser" [ 12.893944] type=1400 audit(1409741383.928:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser" [ 12.893949] type=1400 audit(1409741383.928:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser" [ 12.894144] type=1400 audit(1409741383.929:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser" [ 12.894980] type=1400 audit(1409741383.929:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=430 comm="apparmor_parser" [ 12.894986] type=1400 audit(1409741383.929:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=430 comm="apparmor_parser" [ 12.894990] type=1400 audit(1409741383.929:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=430 comm="apparmor_parser" [ 12.895359] type=1400 audit(1409741383.930:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=430 comm="apparmor_parser" [ 12.952539] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 12.952755] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 12.955295] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 12.960035] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 12.960044] nouveau [ PTHERM][0000:01:00.0] fan management: automatic [ 12.960047] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 12.960078] nouveau [ CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz [ 12.960081] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz [ 12.960084] nouveau [ CLK][0000:01:00.0] 0f: core 589 MHz shader 1402 MHz memory 400 MHz [ 12.960101] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz [ 12.960255] [TTM] Zone kernel: Available graphics memory: 1024622 kiB [ 12.960257] [TTM] Initializing pool allocator [ 12.960261] [TTM] Initializing DMA pool allocator [ 12.960270] nouveau [ DRM] VRAM: 512 MiB [ 12.960271] nouveau [ DRM] GART: 1048576 MiB [ 12.960276] nouveau [ DRM] TMDS table version 2.0 [ 12.960277] nouveau [ DRM] DCB version 4.0 [ 12.960279] nouveau [ DRM] DCB outp 00: 02000300 00000000 [ 12.960281] nouveau [ DRM] DCB outp 01: 01000302 00020030 [ 12.960283] nouveau [ DRM] DCB outp 02: 02011362 00020010 [ 12.960284] nouveau [ DRM] DCB outp 03: 01022310 00000000 [ 12.960286] nouveau [ DRM] DCB conn 00: 00001030 [ 12.960288] nouveau [ DRM] DCB conn 01: 00002161 [ 12.960289] nouveau [ DRM] DCB conn 02: 00000200 [ 12.972278] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 12.972282] [drm] No driver support for vblank timestamp query. [ 12.997030] nouveau [ DRM] MM: using COPY for buffer copies [ 13.041685] nouveau [ DRM] allocated 1920x1080 fb: 0x70000, bo ffff880079796c00 [ 13.041843] fbcon: nouveaufb (fb0) is primary device [ 13.120699] Console: switching to colour frame buffer device 240x67 [ 13.127103] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 13.127105] nouveau 0000:01:00.0: registered panic notifier [ 13.127114] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0 [ 14.279464] init: failsafe main process (523) killed by TERM signal [ 18.049074] Bluetooth: Core ver 2.17 [ 18.049121] NET: Registered protocol family 31 [ 18.049123] Bluetooth: HCI device and connection manager initialized [ 18.049139] Bluetooth: HCI socket layer initialized [ 18.049141] Bluetooth: L2CAP socket layer initialized [ 18.049145] Bluetooth: SCO socket layer initialized [ 18.330235] Bluetooth: RFCOMM TTY layer initialized [ 18.330249] Bluetooth: RFCOMM socket layer initialized [ 18.330256] Bluetooth: RFCOMM ver 1.11 [ 18.435566] init: cups main process (720) killed by HUP signal [ 18.435578] init: cups main process ended, respawning [ 18.524523] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.524527] Bluetooth: BNEP filters: protocol multicast [ 18.524540] Bluetooth: BNEP socket layer initialized [ 24.378332] r8169 0000:02:00.0 eth0: link down [ 24.378338] r8169 0000:02:00.0 eth0: link down [ 24.378375] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.378679] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.441726] r8169 0000:02:00.0 eth0: link up [ 26.441740] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.263237] audit_printk_skb: 15 callbacks suppressed [ 27.263240] type=1400 audit(1409741398.298:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=895 comm="apparmor_parser" [ 27.263247] type=1400 audit(1409741398.298:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=895 comm="apparmor_parser" [ 27.263608] type=1400 audit(1409741398.298:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=895 comm="apparmor_parser" [ 27.264001] type=1400 audit(1409741398.298:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=896 comm="apparmor_parser" [ 27.264019] type=1400 audit(1409741398.299:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=896 comm="apparmor_parser" [ 27.264283] type=1400 audit(1409741398.299:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=896 comm="apparmor_parser" [ 27.267798] type=1400 audit(1409741398.302:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=900 comm="apparmor_parser" [ 27.267806] type=1400 audit(1409741398.302:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser" [ 27.267810] type=1400 audit(1409741398.302:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser" [ 27.268197] type=1400 audit(1409741398.303:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser" [ 27.395353] init: samba-ad-dc main process (781) terminated with status 1 [ 28.679493] init: nvidia-prime main process (971) terminated with status 127 [ 36.197670] init: plymouth-upstart-bridge main process ended, respawning [ 36.207632] init: plymouth-upstart-bridge main process ended, respawning [ 48.128763] audit_printk_skb: 141 callbacks suppressed [ 48.128767] type=1400 audit(1409741419.163:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1694 comm="apparmor_parser" [ 48.128774] type=1400 audit(1409741419.163:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1694 comm="apparmor_parser" [ 48.129167] type=1400 audit(1409741419.164:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1694 comm="apparmor_parser" [ 65.785624] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 65.787249] sd 4:0:0:0: [sdb] Asking for cache data failed [ 65.787255] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 118.009500] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 118.011124] sd 4:0:0:0: [sdb] Asking for cache data failed [ 118.011130] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 170.233614] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 170.235238] sd 4:0:0:0: [sdb] Asking for cache data failed [ 170.235245] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 222.457443] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 222.459080] sd 4:0:0:0: [sdb] Asking for cache data failed [ 222.459087] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 274.681603] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 274.683121] sd 4:0:0:0: [sdb] Asking for cache data failed [ 274.683127] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 326.905360] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 326.906987] sd 4:0:0:0: [sdb] Asking for cache data failed [ 326.906992] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 379.129538] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 379.131164] sd 4:0:0:0: [sdb] Asking for cache data failed [ 379.131171] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 431.353508] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 431.355132] sd 4:0:0:0: [sdb] Asking for cache data failed [ 431.355139] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 483.577135] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 483.578757] sd 4:0:0:0: [sdb] Asking for cache data failed [ 483.578769] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 535.801184] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 535.802801] sd 4:0:0:0: [sdb] Asking for cache data failed [ 535.802808] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 588.025270] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 588.026890] sd 4:0:0:0: [sdb] Asking for cache data failed [ 588.026898] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 640.249176] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 640.250786] sd 4:0:0:0: [sdb] Asking for cache data failed [ 640.250790] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 692.473199] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 692.474815] sd 4:0:0:0: [sdb] Asking for cache data failed [ 692.474822] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 719.148489] perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 744.697028] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 744.698654] sd 4:0:0:0: [sdb] Asking for cache data failed [ 744.698657] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 796.921137] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 796.922761] sd 4:0:0:0: [sdb] Asking for cache data failed [ 796.922767] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 849.145009] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 849.146635] sd 4:0:0:0: [sdb] Asking for cache data failed [ 849.146642] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 849.257030] usb 1-7: reset high-speed USB device number 6 using ehci-pci [ 875.454070] usb 3-2: USB disconnect, device number 2 [ 901.881088] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 901.882709] sd 4:0:0:0: [sdb] Asking for cache data failed [ 901.882716] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 954.105054] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 954.106573] sd 4:0:0:0: [sdb] Asking for cache data failed [ 954.106580] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1006.329044] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1006.330658] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1006.330665] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1058.553123] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1058.554867] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1058.554874] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1110.777458] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1110.779077] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1110.779088] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1163.001111] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1163.002750] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1163.002756] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1181.782047] usb 3-2: new full-speed USB device number 3 using uhci_hcd [ 1181.928914] usb 3-2: New USB device found, idVendor=1235, idProduct=001e [ 1181.928923] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1181.928927] usb 3-2: Product: MiniNova [ 1181.928931] usb 3-2: Manufacturer: Focusrite A.E. Ltd [ 1215.225214] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1215.226823] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1215.226830] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1267.449207] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1267.450833] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1267.450841] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1269.832053] usb 1-7: reset high-speed USB device number 6 using ehci-pci [ 1320.185094] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1320.186716] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1320.186720] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1372.409153] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1372.410785] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1372.410792] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1424.634180] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1424.635812] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1424.635819] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1476.857160] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1476.858783] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1476.858789] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1476.980052] usb 1-7: reset high-speed USB device number 6 using ehci-pci [ 1529.593190] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1529.594800] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1529.594807] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1529.707045] usb 1-7: reset high-speed USB device number 6 using ehci-pci [ 1582.329124] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1582.330760] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1582.330764] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1634.553352] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1634.554970] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1634.554977] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1686.776983] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1686.778604] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1686.778610] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1739.513078] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1739.514679] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1739.514686] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1791.737123] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1791.738733] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1791.738739] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1843.961017] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1843.962627] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1843.962633] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1896.185134] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1896.186750] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1896.186757] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1948.409147] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1948.410756] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1948.410763] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2000.633098] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 2000.634724] sd 4:0:0:0: [sdb] Asking for cache data failed [ 2000.634730] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2052.857148] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 2052.858877] sd 4:0:0:0: [sdb] Asking for cache data failed [ 2052.858884] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2105.081146] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 2105.082776] sd 4:0:0:0: [sdb] Asking for cache data failed [ 2105.082784] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2157.305072] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 2157.306695] sd 4:0:0:0: [sdb] Asking for cache data failed [ 2157.306701] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2209.529213] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 2209.530827] sd 4:0:0:0: [sdb] Asking for cache data failed [ 2209.530834] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2236.488055] usb 1-7: reset high-speed USB device number 6 using ehci-pci [ 2262.265106] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 2262.266727] sd 4:0:0:0: [sdb] Asking for cache data failed [ 2262.266734] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2314.489090] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 2314.490710] sd 4:0:0:0: [sdb] Asking for cache data failed [ 2314.490716] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2366.713120] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 2366.714743] sd 4:0:0:0: [sdb] Asking for cache data failed [ 2366.714750] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2418.937001] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 2418.938623] sd 4:0:0:0: [sdb] Asking for cache data failed [ 2418.938630] sd 4:0:0:0: [sdb] Assuming drive cache: write through
Au milieu de tout ça il y a une ligne : usb 3-2: Product: MiniNova (j'ai pas réussi à la changer de couleur pour la trouver plus facilement)
Ensuite avec la commande "lsmod" :
Copy to clipboard
Module Size Used by snd_hrtimer 12744 1 snd_seq_dummy 12798 2 bnep 19624 2 rfcomm 69160 0 bluetooth 395387 10 bnep,rfcomm joydev 17332 0 hid_generic 12548 0 nouveau 1097199 3 ums_realtek 18029 0 usb_storage 57966 1 ums_realtek snd_hda_codec_hdmi 46368 4 snd_usb_audio 153617 5 usbhid 48425 0 mxm_wmi 13021 1 nouveau snd_usbmidi_lib 25070 1 snd_usb_audio wmi 19177 2 mxm_wmi,nouveau hid 106148 2 hid_generic,usbhid snd_hda_codec_via 27860 1 video 19476 1 nouveau ttm 85115 1 nouveau snd_hda_intel 52306 5 drm_kms_helper 53081 1 nouveau snd_hda_codec 192906 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel drm 303102 5 ttm,drm_kms_helper,nouveau coretemp 13435 0 snd_hwdep 13602 2 snd_usb_audio,snd_hda_codec snd_pcm 102040 6 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel kvm_intel 143104 0 snd_page_alloc 18710 2 snd_pcm,snd_hda_intel kvm 451444 1 kvm_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi i2c_algo_bit 13413 1 nouveau snd_rawmidi 30095 2 snd_usbmidi_lib,snd_seq_midi snd_seq 61560 11 snd_seq_midi_event,snd_seq_dummy,snd_seq_midi snd_seq_device 14497 4 snd_seq,snd_rawmidi,snd_seq_dummy,snd_seq_midi snd_timer 29433 3 snd_hrtimer,snd_pcm,snd_seq snd 69273 35 snd_hrtimer,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_dummy,snd_seq_midi serio_raw 13413 0 soundcore 12680 1 snd lpc_ich 21080 0 binfmt_misc 17468 1 asus_atk0110 18657 0 mac_hid 13205 0 parport_pc 32701 1 ppdev 17671 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc psmouse 102533 0 r8169 67581 0 mii 13934 1 r8169
Mais bon je sais pas trop comment analyser tout ça !
Bref, Jack ne trouve pas mon clavier. J'espère que c'est possible de le faire fonctionner en MIDI ?!
