Chargement...
 
[Voir/Cacher menus de gauche]
[Voir/Cacher menus de droite]

7 - Autres sujets : le nimp'

Vous visualisez une réponse à [RESOLU] librazik et la wifi (puce rt73) Imprimer cette page seulement Imprimer toutes les pages

librazik et la wifi

calixtus06 utilisateur non connecté
tenryu écrit :
Je plussoie sur ce que dit ZBP. Normalement, lors du boot, tu devrais avoir un message qui te parle de microcode qui manque et qu'il faudrait charger.


[    0.361437] pci 0000:00:1d.0: reg 0x10: [mem 0xe1a50000-0xe1a503ff]
[    0.361515] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.361568] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.361602] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.361678] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.361712] pci 0000:00:1f.0: [8086:1c4c] type 00 class 0x060100
[    0.361868] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.361881] pci 0000:00:1f.2: reg 0x10: [io  0x30d0-0x30d7]
[    0.361888] pci 0000:00:1f.2: reg 0x14: [io  0x30c0-0x30c3]
[    0.361894] pci 0000:00:1f.2: reg 0x18: [io  0x30b0-0x30b7]
[    0.361901] pci 0000:00:1f.2: reg 0x1c: [io  0x30a0-0x30a3]
[    0.361908] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.361915] pci 0000:00:1f.2: reg 0x24: [mem 0xe1a40000-0xe1a407ff]
[    0.361951] pci 0000:00:1f.2: PME# supported from D3hot
[    0.362014] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.362027] pci 0000:00:1f.3: reg 0x10: [mem 0xe1a30000-0xe1a300ff 64bit]
[    0.362046] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.362186] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.362265] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.362270] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.362274] pci 0000:00:1c.2:   bridge window [mem 0xe1000000-0xe19fffff]
[    0.362282] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[    0.362344] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.362352] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.362353] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.362354] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.362355] pci 0000:00:1e.0:   bridge window [mem 0xcfa00000-0xfeafffff window] (subtractive decode)
[    0.362356] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.362777] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.362819] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.362860] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.362900] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.362940] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.362980] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.363020] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.363060] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.363120] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.363236] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.363237] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.363238] vgaarb: loaded
[    0.363239] vgaarb: bridge control possible 0000:00:02.0
[    0.363294] PCI: Using ACPI for IRQ routing
[    0.364716] PCI: pci_cache_line_size set to 64 bytes
[    0.364748] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
[    0.364749] e820: reserve RAM buffer [mem 0xca9fa000-0xcbffffff]
[    0.364750] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
[    0.364751] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[    0.364752] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
[    0.364875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.364879] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.366898] clocksource: Switched to clocksource hpet
[    0.371888] VFS: Disk quotas dquot_6.6.0
[    0.371918] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.371990] pnp: PnP ACPI init
[    0.372117] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.372118] system 00:00: [io  0xffff] has been reserved
[    0.372119] system 00:00: [io  0xffff] has been reserved
[    0.372121] system 00:00: [io  0xffff] has been reserved
[    0.372122] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.372123] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.372125] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.372126] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.372129] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372152] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.372191] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.372193] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.372405] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.372558] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.372559] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.372560] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.372561] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.372562] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.372563] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.372565] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.372566] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.372567] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    0.372568] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.372570] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372603] system 00:05: [mem 0x20000000-0x201fffff] has been reserved
[    0.372604] system 00:05: [mem 0x40000000-0x401fffff] has been reserved
[    0.372605] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.372685] pnp: PnP ACPI: found 6 devices
[    0.378686] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.378723] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.378740] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.378742] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.378749] pci 0000:00:1c.2:   bridge window [mem 0xe1000000-0xe19fffff]
[    0.378753] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[    0.378761] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.378771] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.378772] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.378773] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.378774] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[    0.378775] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.378776] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.378777] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe19fffff]
[    0.378778] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
[    0.378779] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.378779] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.378780] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.378781] pci_bus 0000:03: resource 7 [mem 0xcfa00000-0xfeafffff window]
[    0.378782] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.378859] NET: Registered protocol family 2
[    0.379025] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.379078] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.379143] TCP: Hash tables configured (established 32768 bind 32768)
[    0.379157] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.379169] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.379222] NET: Registered protocol family 1
[    0.379239] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.379559] PCI: CLS 64 bytes, default 64
[    0.379594] Unpacking initramfs...
[    0.675943] Freeing initrd memory: 21900K (ffff89d0f552a000 - ffff89d0f6a8d000)
[    0.675997] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.675999] software IO TLB [mem 0xc69fa000-0xca9fa000] (64MB) mapped at [ffff89d1869fa000-ffff89d18a9f9fff]
[    0.676413] audit: initializing netlink subsys (disabled)
[    0.676427] audit: type=2000 audit(1492096494.676:1): initialized
[    0.676667] Initialise system trusted keyrings
[    0.676757] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.676787] zbud: loaded
[    0.714937] Key type asymmetric registered
[    0.714938] Asymmetric key parser 'x509' registered
[    0.714953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.714982] io scheduler noop registered
[    0.714983] io scheduler deadline registered
[    0.714995] io scheduler cfq registered (default)
[    0.715360] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.715364] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.715374] intel_idle: MWAIT substates: 0x1120
[    0.715375] intel_idle: v0.4.1 model 0x2A
[    0.715483] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.715637] GHES: HEST is not enabled!
[    0.715680] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.736174] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.736602] Linux agpgart interface v0.103
[    0.736632] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.736633] AMD IOMMUv2 functionality not available on this system
[    0.736938] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.739875] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.739878] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.740029] mousedev: PS/2 mouse device common for all mice
[    0.740061] rtc_cmos 00:01: RTC can wake from S4
[    0.740195] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.740277] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.740286] intel_pstate: Intel P-state driver initializing
[    0.740469] ledtrig-cpu: registered to indicate activity on CPUs
[    0.741324] NET: Registered protocol family 10
[    0.741665] mip6: Mobile IPv6
[    0.741667] NET: Registered protocol family 17
[    0.741670] mpls_gso: MPLS GSO support
[    0.741938] microcode: sig=0x206a7, pf=0x2, revision=0x29
[    0.742043] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.742251] registered taskstats version 1
[    0.742253] Loading compiled-in X.509 certificates
[    0.744536] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    0.745009] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    0.745034] zswap: loaded using pool lzo/zbud
[    0.745449] rtc_cmos 00:01: setting system clock to 2017-04-13 15:14:55 UTC (1492096495)
[    0.745531] PM: Hibernation image not present or could not be loaded.
[    0.747470] Freeing unused kernel memory: 1396K (ffffffff90f2d000 - ffffffff9108a000)
[    0.747472] Write protecting the kernel read-only data: 12288k
[    0.748290] Freeing unused kernel memory: 2032K (ffff89d16b204000 - ffff89d16b400000)
[    0.752827] Freeing unused kernel memory: 1244K (ffff89d16b6c9000 - ffff89d16b800000)
[    0.762988] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.776919] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.777013] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.777025] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.777964] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.778008] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779478] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779553] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779922] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779992] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.780066] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.807762] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    0.817998] pps_core: LinuxPPS API ver. 1 registered
[    0.817999] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.818767] PTP clock support registered
[    0.823894] ACPI: bus type USB registered
[    0.823923] usbcore: registered new interface driver usbfs
[    0.823934] usbcore: registered new interface driver hub
[    0.823957] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.823957] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.823959] usbcore: registered new device driver usb
[    0.824147] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.825774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.826326] ehci-pci: EHCI PCI platform driver
[    0.829199] SCSI subsystem initialized
[    0.834848] libata version 3.00 loaded.
[    0.846314] AVX version of gcm_enc/dec engaged.
[    0.846315] AES CTR mode by8 optimization enabled
[    0.971179] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.093030] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 18:03:73:dc:f6:7c
[    1.093032] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.093069] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: E041FF-0FF
[    1.093305] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.093314] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.093332] ehci-pci 0000:00:1a.0: debug port 2
[    1.094568] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.097237] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.097420] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1a70000
[    1.111001] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.111056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.111057] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.111059] usb usb1: Product: EHCI Host Controller
[    1.111060] usb usb1: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[    1.111061] usb usb1: SerialNumber: 0000:00:1a.0
[    1.111307] hub 1-0:1.0: USB hub found
[    1.111316] hub 1-0:1.0: 2 ports detected
[    1.111591] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.111596] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.111610] ehci-pci 0000:00:1d.0: debug port 2
[    1.115517] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.115569] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe1a50000
[    1.131007] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.131384] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.131387] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.131389] usb usb2: Product: EHCI Host Controller
[    1.131390] usb usb2: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[    1.131392] usb usb2: SerialNumber: 0000:00:1d.0
[    1.131725] hub 2-0:1.0: USB hub found
[    1.131769] hub 2-0:1.0: 2 ports detected
[    1.132153] ahci 0000:00:1f.2: version 3.0
[    1.132379] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    1.132382] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.143805] scsi host0: ahci
[    1.144118] scsi host1: ahci
[    1.144346] scsi host2: ahci
[    1.144466] scsi host3: ahci
[    1.144561] scsi host4: ahci
[    1.144648] scsi host5: ahci
[    1.144703] ata1: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40100 irq 27
[    1.144705] ata2: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40180 irq 27
[    1.144706] ata3: DUMMY
[    1.144707] ata4: DUMMY
[    1.144708] ata5: DUMMY
[    1.144708] ata6: DUMMY
[    1.439012] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.458107] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.458131] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.458737] ata2.00: ATAPI: TSSTcorp DVD+/-RW SH-216AB, D200, max UDMA/100
[    1.458741] ata2.00: applying bridge limits
[    1.458982] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.459699] ata2.00: configured for UDMA/100
[    1.459859] ata1.00: ATA-8: WDC WD5000AAKX-753CA1, 19.01H19, max UDMA/133
[    1.459862] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.461852] ata1.00: configured for UDMA/133
[    1.462245] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-7 1H19 PQ: 0 ANSI: 5
[    1.516426] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW SH-216AB D200 PQ: 0 ANSI: 5
[    1.536611] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.536680] sd 0:0:0:0: [sda] Write Protect is off
[    1.536683] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.536707] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.549462] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.549472] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.549743] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.552467]  sda: sda1 sda2 < sda5 sda6 >
[    1.553323] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.591537] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.591539] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.591790] hub 1-1:1.0: USB hub found
[    1.592279] hub 1-1:1.0: 6 ports detected
[    1.607561] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.607564] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.607834] hub 2-1:1.0: USB hub found
[    1.608022] hub 2-1:1.0: 8 ports detected
[    1.691017] tsc: Refined TSC clocksource calibration: 3092.973 MHz
[    1.691024] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95594edb3, max_idle_ns: 440795220223 ns
[    1.800458] random: fast init done
[    1.903005] usb 2-1.6: new low-speed USB device number 3 using ehci-pci
[    1.904232] device-mapper: uevent: version 1.0.3
[    1.904367] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.979000] raid6: sse2x1   gen()  5924 MB/s
[    2.047002] raid6: sse2x1   xor()  5939 MB/s
[    2.114998] raid6: sse2x2   gen() 11000 MB/s
[    2.182998] raid6: sse2x2   xor()  8169 MB/s
[    2.251006] raid6: sse2x4   gen() 13132 MB/s
[    2.319007] raid6: sse2x4   xor()  9947 MB/s
[    2.319008] raid6: using algorithm sse2x4 gen() 13132 MB/s
[    2.319008] raid6: .... xor() 9947 MB/s, rmw enabled
[    2.319009] raid6: using ssse3x2 recovery algorithm
[    2.320120] xor: automatically using best checksumming function   avx       
[    2.336305] Btrfs loaded, crc32c=crc32c-intel
[    2.391277] PM: Starting manual resume from disk
[    2.391281] PM: Hibernation image partition 8:5 present
[    2.391282] PM: Looking for hibernation image.
[    2.391556] PM: Image not found (code -22)
[    2.391558] PM: Hibernation image not present or could not be loaded.
[    2.424096] usb 2-1.6: New USB device found, idVendor=0603, idProduct=00f2
[    2.424098] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.424100] usb 2-1.6: Product: USB Keyboard
[    2.424101] usb 2-1.6: Manufacturer: NOVATEK
[    2.429916] hidraw: raw HID events driver (C) Jiri Kosina
[    2.438544] usbcore: registered new interface driver usbhid
[    2.438545] usbhid: USB HID core driver
[    2.440561] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:0603:00F2.0001/input/input3
[    2.499445] hid-generic 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[    2.501103] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:0603:00F2.0002/input/input4
[    2.507031] usb 2-1.7: new low-speed USB device number 4 using ehci-pci
[    2.517274] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.559353] hid-generic 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[    2.621406] usb 2-1.7: New USB device found, idVendor=046d, idProduct=c03e
[    2.621409] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.621411] usb 2-1.7: Product: USB-PS/2 Optical Mouse
[    2.621413] usb 2-1.7: Manufacturer: Logitech
[    2.625598] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C03E.0003/input/input5
[    2.625798] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.7/input0
[    2.715223] clocksource: Switched to clocksource tsc
[    3.527093] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    3.658268] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.658454] systemd[1]: Detected architecture x86-64.
[    3.669726] systemd[1]: Set hostname to <LibraZiK-studio-audio>.
[    4.722519] systemd[1]: Reached target Remote File Systems (Pre).
[    4.722610] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.722733] systemd[1]: Created slice User and Session Slice.
[    4.722789] systemd[1]: Listening on Journal Socket.
[    4.722849] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.722885] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.722923] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.773495] random: crng init done
[    5.312495] lp: driver loaded but no devices found
[    5.410640] ppdev: user-space parallel port driver
[    5.432857] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[    5.567349] parport0: irq 7 detected
[    5.667415] lp0: using parport0 (polling).
[    5.718843] fuse init (API version 7.26)
[    7.723364] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.795785] systemd-journald[707]: Received request to flush runtime journal from PID 1
[    7.999384] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    7.999388] ACPI: Power Button [PWRB]
[    7.999422] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    7.999423] ACPI: Power Button [PWRF]
[    8.042142] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    8.053219] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.061928] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[    8.061933] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.061935] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    8.061938] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.061938] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    8.061940] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.061940] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    8.061942] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.061943] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.197464] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.197506] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    8.256290] [drm] Initialized
[    8.292549] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    8.292551] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    8.292552] RAPL PMU: hw unit of domain package 2^-16 Joules
[    8.292552] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    8.299168] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    8.415473] iTCO_vendor_support: vendor-support=0
[    8.662238] [drm] Memory usable by graphics device = 2048M
[    8.662240] [drm] Replacing VGA console driver
[    8.662763] Console: switching to colour dummy device 80x25
[    8.668888] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.668889] [drm] Driver supports precise vblank timestamp query.
[    8.671045] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.671071] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    8.671182] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.671242] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.686506] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.686743] acpi device:01: registered as cooling_device4
[    8.686814] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    8.686885] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    8.701252] fbcon: inteldrmfb (fb0) is primary device
[    8.764604] Console: switching to colour frame buffer device 160x64
[    8.785589] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.791462] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
[    8.792002] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[    8.792004] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    8.792006] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.792007] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.792008] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.792010] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x19
[    8.792012] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x18
[    8.824181] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.826096] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.827216] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.827293] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.827396] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    8.828637] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    8.828706] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    9.097539] intel_rapl: Found RAPL domain package
[    9.097541] intel_rapl: Found RAPL domain core
[    9.097543] intel_rapl: Found RAPL domain uncore
[    9.097549] intel_rapl: RAPL package 0 domain package locked by BIOS
[   10.284376] Adding 4071420k swap on /dev/sda5.  Priority:-1 extents:1 across:4071420k FS
[   18.389801] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  675.037133] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[  675.284696] usb 1-1.4: New USB device found, idVendor=06f8, idProduct=e010
[  675.284699] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  675.284701] usb 1-1.4: Product: 802.11 bg WLAN
[  675.284702] usb 1-1.4: Manufacturer: Ralink
[  675.493204] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[  675.932023] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[  675.945285] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  675.946106] usbcore: registered new interface driver rt73usb
[  676.022565] rt73usb 1-1.4:1.0 wlx0008d3359008: renamed from wlan0
[  676.069218] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[  676.086441] rt73usb 1-1.4:1.0: firmware: direct-loading firmware rt73.bin
[  676.086446] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[  677.601295] wlx0008d3359008: authenticate with 14:0c:76:f8:6d:28
[  677.649291] wlx0008d3359008: send auth to 14:0c:76:f8:6d:28 (try 1/3)
[  677.651054] wlx0008d3359008: authenticated
[  677.653242] wlx0008d3359008: associate with 14:0c:76:f8:6d:28 (try 1/3)
[  677.659058] wlx0008d3359008: RX AssocResp from 14:0c:76:f8:6d:28 (capab=0x411 status=0 aid=2)
[  677.669946] wlx0008d3359008: associated
root@LibraZiK-studio-audio:/home/nicolasmao2#


Afficher les articles :
Aller au forum :

Documentation [Afficher / Cacher]

Connexion
[Afficher / Cacher]



Mégaphone [Afficher / Cacher]

olinuxx, 02:21, lun. 17 Jun 2019: Bonjour et bienvenue également à madguitar cool
olinuxx, 15:54, dim. 16 Jun 2019: Bonjour et bienvenue à lafissure cool
sub26nico, 23:59, sam. 15 Jun 2019: Salut et bienvenue à ikerino59 :-)
sub26nico, 22:24, jeu. 13 Jun 2019: Salut et bienvenue à rankxerom :-)
Sasaki, 14:49, mer. 12 Jun 2019: Inspirations sportives [Lien]
Nolwen, 17:36, dim. 09 Jun 2019: Sortie de LMMS 1.2.0 ! [Lien]
sub26nico, 11:41, sam. 08 Jun 2019: Salut et bienvenue à dewiweb :-)
sub26nico, 20:26, ven. 07 Jun 2019: Yo Zebassprophet :-)
zebassprophet, 16:21, ven. 07 Jun 2019: yoooooooooooooooo les amis
sub26nico, 21:38, jeu. 06 Jun 2019: Salut et bienvenue à Texas Barbudos :-)
sub26nico, 23:08, mer. 05 Jun 2019: Salut et bienvenue à jojopigama et Roger-Luc :-)
allany, 09:18, mer. 05 Jun 2019: Et voilà l'édito du mois ! [Lien]