[RESOLU] Automatiser le démarrage de pulseaudio avec jack
Hello suite à l'installation d'un logiciel j'ai malencontreusement fait un apt autoremove..
J'ai perdu la moitié des applis librazik ..
Et surtout plus de son: je suis obligé de faire un pulseaudio — start pour avoir le son de firefox...
je cherche encore sur le net
La cohabitation avec Jack semble difficile :
Après un
jack bug:
j'ai indiqué à jack de killer pulseaudio au départ de jack et là jack peut fonctionner ...
je tente la méthode de ce lien :
pulseaudio vers jack
Pas mieux :
Pas de son sur firefox ( ???)
Un petit tour dans le fichier de config de pulse:
Je ne vois pas les modules de transport de pulse vers jack (???)
Si vous voulez bien me filer un coup de main, ça fait plusieurs heures que je cherche ..
Merci
Nico
J'ai perdu la moitié des applis librazik ..
Et surtout plus de son: je suis obligé de faire un pulseaudio — start pour avoir le son de firefox...
je cherche encore sur le net
pactl load-module module-jack-sink
Échec : Échec lors de l'initialisation du module
La cohabitation avec Jack semble difficile :
Après un
pulseaudio -k
jack bug:
19:50:25.065 Journalisation démarrée --- sam. oct. 13 19:50:25 2018 --- 19:50:25.099 Réinitialisation des statistiques. 19:50:25.104 Changement des connexions ALSA. connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=Aucun fichier ou dossier de ce type) attempt to connect to server failed 19:50:25.119 Changement du graphe des connexions ALSA. qjackctlAlsaGraph::updateItems() qjackctlAlsaGraph::updateItems() 19:50:36.527 Script de démarrage... 19:50:36.527 pulseaudio --start connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=Aucun fichier ou dossier de ce type) attempt to connect to server failed 19:50:37.039 Script de démarrage terminé avec succès. 19:50:37.039 JACK démarre... 19:50:37.039 /usr/bin/jackd -P70 -dalsa -r44100 -p256 -n2 -D -Chw:PODStudioUX2 -Phw:PODStudioUX2 -i2 -o2 19:50:37.041 JACK a été démarré avec le PID=4803. jackd 0.125.0rc1 Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. loading driver .. apparent rate = 44100 creating alsa driver ... hw:PODStudioUX2|hw:PODStudioUX2|256|2|44100|2|2|nomon|swmeter|-|32bit ATTENTION: The playback device "hw:PODStudioUX2" is already in use. Please stop the application using it and run JACK again cannot load driver module alsa no message buffer overruns 19:50:37.196 JACK a été arrêté 19:50:37.197 Script post-extinction... 19:50:37.197 pulseaudio --start qjackctlJackGraph::clearItems() 19:50:37.610 Script post-extinction terminé avec succès. 19:50:39.248 Impossible de connecter le serveur JACK comme client. - L'opération a échoué. - Incapable de se connecter au serveur. Veuillez consulter la fenêtre des messages pour plus d'informations. connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=Aucun fichier ou dossier de ce type) attempt to connect to server failed qjackctlJackGraph::clearItems() qjackctlJackGraph::clearItems()
j'ai indiqué à jack de killer pulseaudio au départ de jack et là jack peut fonctionner ...
je tente la méthode de ce lien :
pulseaudio vers jack
Pas mieux :
Pas de son sur firefox ( ???)
Un petit tour dans le fichier de config de pulse:
#!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gconf.so .nofail load-module module-gconf .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply ### Make some devices default #set-default-sink output #set-default-source input
Je ne vois pas les modules de transport de pulse vers jack (???)
Si vous voulez bien me filer un coup de main, ça fait plusieurs heures que je cherche ..
Merci
Nico