Chargement...
 
[Voir/Cacher menus de gauche]
[Voir/Cacher menus de droite]

1 - Le matériel et les pilotes ALSA, FFADO, ...

> Forums de discussion > 1 - Le matériel et les pilotes ALSA, FFADO, ... > Fire wire ,HP EliteBook 8440p [RESOLU]
Dernier post

Fire wire ,HP EliteBook 8440p [RESOLU]

Florentdu19 utilisateur non connecté
Bonjour,


J'avais creer un homme studio avec une tours avant, tout fonctionnait (Librazik, Ardour, et autres logciels , table ONYX 1620i et les musicos !!)

Pour des raison pratique, J'ai fais l'achat d'un HP EliteBook 8440p, pour son FIREWIRE, pour brancher sur table de mixage ONYX 1620i.

et voila le hic, je n'y arrive pas, j'ai mème pensé au cordon (croisé , droit)..
je passe les détails des essais...

root@neufdegres:/home/neufdegres# cat /proc/asound/cards
 0 [MID            ]: HDA-Intel - HDA Intel MID
                      HDA Intel MID at 0xd4720000 irq 31


root@neufdegres:/home/neufdegres# aplay -l
**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: MID [HDA Intel MID], périphérique 0: 92HD75B3X5 Analog [92HD75B3X5 Analog]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: MID [HDA Intel MID], périphérique 3: HDMI 0 [HDMI 0]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: MID [HDA Intel MID], périphérique 7: HDMI 1 [HDMI 1]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: MID [HDA Intel MID], périphérique 8: HDMI 2 [HDMI 2]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
root@neufdegres:/home/neufdegres#


Cecque QtlJack renvoi
18:51:39.555 Journalisation démarrée --- sam. sept. 28 18:51:39 2019 ---
18:51:39.645 Réinitialisation des statistiques.
18:51:39.655 Changement des connexions ALSA.
Cannot connect to server socket err = Aucun fichier ou dossier de ce type
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
18:51:39.777 Changement du graphe des connexions ALSA.
qjackctlAlsaGraph::updateItems()
18:51:42.617 Script de démarrage...
18:51:42.617 pulseaudio --start
Cannot connect to server socket err = Aucun fichier ou dossier de ce type
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
N: [pulseaudio] main.c: Serveur configuré par l'utilisateur sur {c189928e5c154026b9bc325866c8f86e}unix:/run/user/1000/pulse/native, qui semble être local. Analyse plus précise en cours.
18:51:43.035 Script de démarrage terminé avec succès.
18:51:43.035 JACK démarre...
18:51:43.035 /usr/bin/jackd -v -P70 -dfirewire -r48000 -p512 -n3 -i1 -o1
18:51:43.039 JACK a été démarré avec le PID=2276.
no message buffer overruns
no message buffer overruns
no message buffer overruns
jackdmp 1.9.12
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2016 Grame.
Copyright 2016-2017 Filipe Coelho.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 70
self-connect-mode is "Don't restrict self connect requests"
Jack: JackPosixThread::StartImp : create non RT thread
Jack: JackPosixThread::ThreadHandler : start
Jack: JackDriver::Open capture_driver_name = 
Jack: JackDriver::Open playback_driver_name = 
Jack: Check protocol client = 8 server = 8
Jack: JackEngine::ClientInternalOpen: name = system
Jack: JackEngine::AllocateRefNum ref = 0
Jack: JackLinuxFutex::Allocate name = jack_sem.1000_default_system val = 0
Jack: JackEngine::NotifyAddClient: name = system
Jack: JackGraphManager::SetBufferSize size = 512
Jack: JackConnectionManager::DirectConnect first: ref1 = 0 ref2 = 0
Jack: JackGraphManager::ConnectRefNum cur_index = 0 ref1 = 0 ref2 = 0
Jack: JackDriver::SetupDriverSync driver sem in flush mode
Jack: JackSocketServerChannel::Open
Jack: JackServerSocket::Bind : addr.sun_path /dev/shm/jack_default_1000_0
Jack: JackSocketServerChannel::BuildPoolTable size = 1
Jack: JackEngine::Open
Jack: JackClientSocket::Connect : addr.sun_path /dev/shm/jack_default_1000_0
Jack: JackEngine::ClientInternalOpen: name = freewheel
Jack: JackEngine::AllocateRefNum ref = 1
Jack: JackLinuxFutex::Allocate name = jack_sem.1000_default_freewheel val = 0
Jack: JackEngine::NotifyAddClient: name = freewheel
Jack: JackDriver::ClientNotify ref = 1 driver = system name = freewheel notify = 0
Jack: JackDriver::ClientNotify ref = 0 driver = freewheel name = system notify = 0
Jack: JackConnectionManager::DirectConnect first: ref1 = 1 ref2 = 1
Jack: JackGraphManager::ConnectRefNum cur_index = 0 ref1 = 1 ref2 = 1
Jack: JackDriver::SetupDriverSync driver sem in flush mode
Jack: JackFFADODriver::Attach fBufferSize 512 fSampleRate 48000
1569689503206483:  (ffado.cpp)[  92] ffado_streaming_init: libffado 2.4.1 built Apr 19 2018 20:03:01
firewire ERR: FFADO: Error creating virtual device
Cannot attach audio driver
Jack: JackDriver::Close
Jack: JackConnectionManager::DirectDisconnect last: ref1 = 1 ref2 = 1
Jack: JackGraphManager::DisconnectRefNum cur_index = 0 ref1 = 1 ref2 = 1
Jack: JackEngine::ClientInternalClose ref = 1
Jack: JackEngine::ClientCloseAux ref = 1
Jack: JackGraphManager::RemoveAllPorts ref = 1
Jack: JackDriver::ClientNotify ref = 1 driver = system name = freewheel notify = 1
Jack: JackEngine::Close
Jack: JackClientSocket::Close
Jack: JackServerSocket::Close /dev/shm/jack_default_1000_0
Jack: JackDriver::Close
Jack: JackConnectionManager::DirectDisconnect last: ref1 = 0 ref2 = 0
Jack: JackGraphManager::DisconnectRefNum cur_index = 0 ref1 = 0 ref2 = 0
Jack: JackEngine::ClientInternalClose ref = 0
Jack: JackEngine::ClientCloseAux ref = 0
Jack: JackGraphManager::RemoveAllPorts ref = 0
Jack: no message buffer overruns
Jack: JackPosixThread::Stop
Jack: JackPosixThread::ThreadHandler : exit
JackServer::Open failed with -1
Jack: Succeeded in unlocking 82280346 byte memory area
Jack: JackShmMem::delete size = 0 index = 0
Jack: ~JackDriver
no message buffer overruns
Jack: ~JackDriver
Jack: Succeeded in unlocking 1187 byte memory area
Jack: JackShmMem::delete size = 0 index = 1
Jack: Cleaning up shared memory
Jack: Cleaning up files
Jack: Unregistering server `default'
Failed to open server
18:51:43.230 JACK a été arrêté
qjackctlJackGraph::clearItems()
18:51:45.083 Impossible de connecter le serveur JACK comme client. - L'opération a échoué. - Incapable de se connecter au serveur. Veuillez consulter la fenêtre des messages pour plus d'informations.
Cannot connect to server socket err = Aucun fichier ou dossier de ce type
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
qjackctlJackGraph::clearItems()
qjackctlJackGraph::clearItems()


Merci pour votre aide

dlb utilisateur non connecté
Bonsoir Florentdu19,

Pour essayer de cerner le problème, tu peux lancer dans un terminal la commande

ffado-diag


qui va lister tout l'environnement firewire de ton pc. Vérifie bien que tes ports firewire apparaissent. S'ils n'étaient pas listés, vérifie dans le bios de ta machine et active le port firewire le cas échéant.

En lançant la commande

ffado-test ListDevices


tu devrais voir ta carte firewire apparaître.

Ces commandes font partie du paquet ffado-tools sur debian stretch.

Florentdu19 utilisateur non connecté
Bonjour dlb, et merci !

root@neufdegres:/home/neufdegres# ffado-diag
FFADO diagnostic utility 2.4.1

(C) 2008 Pieter Palmers
    2009-2010 Arnold Krille
    2018 Nicolas Boulenguez, Jonathan Woithe

gcc                       /usr/bin/gcc
                          gcc (Debian 8.3.0-6) 8.3.0
g++                       /usr/bin/g++
                          g++ (Debian 8.3.0-6) 8.3.0
pyuic4                    None
pyuic5                    None
jackd                     /usr/bin/jackd
                          jackdmp version 1.9.12 tmpdir /dev/shm protocol 8
pkg-config                None

Build time info           /usr/lib/x86_64-linux-gnu/libffado/static_info.txt
  gcc                       /usr/bin/gcc
                            gcc (Debian 7.3.0-17) 7.3.0
  g++                       /usr/bin/g++
                            g++ (Debian 7.3.0-17) 7.3.0
  pyuic4                    None
  pyuic5                    /usr/bin/pyuic5
                            Python User Interface Compiler 5.10.1 for Qt version 5.10.1
  jackd                     None
  pkg-config                /usr/bin/pkg-config
  jack                      not found
  libraw1394                2.1.2
                            -lraw1394
  libavc1394                not found
  libiec61883               1.2.0
                            -liec61883 -lraw1394
  libxml++-2.6              2.40.1
                            -I/usr/include/libxml++-2.6 -I/usr/lib/x86_64-linux-gnu/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/x86_64-linux-gnu/glibmm-2.4/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/sigc++-2.0 -I/usr/lib/x86_64-linux-gnu/sigc++-2.0/include -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lglib-2.0 -lsigc-2.0
  dbus-1                    1.12.8
                            -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -ldbus-1

kernel version            4.19.0-6-amd64
Preempt (low latency)     False
RT patched                False
/dev/fw*                  ['/dev/fw0']
  crw------- 1 root root 246, 0 Sep 30 21:07 /dev/fw0
User IDs                  uid=0(root) gid=0(root) groups=0(root)
uname -a                  Linux neufdegres 4.19.0-6-amd64 #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20) x86_64 GNU/Linux
lspci                     /usr/bin/lspci
  44:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 06) (prog-if 10 [OHCI])
  	Subsystem: Hewlett-Packard Company R5C832 IEEE 1394 Controller [103c:172a]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 20
  	Region 0: Memory at d0401000 (32-bit, non-prefetchable) [size=2K]
  	Capabilities: [dc] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
  	Kernel driver in use: firewire_ohci
  	Kernel modules: firewire_ohci
lscpu                     /usr/bin/lscpu
  Architecture:        x86_64
  CPU op-mode(s):      32-bit, 64-bit
  Byte Order:          Little Endian
  Address sizes:       36 bits physical, 48 bits virtual
  CPU(s):              4
  On-line CPU(s) list: 0-3
  Thread(s) per core:  2
  Core(s) per socket:  2
  Socket(s):           1
  NUMA node(s):        1
  Vendor ID:           GenuineIntel
  CPU family:          6
  Model:               37
  Model name:          Intel(R) Core(TM) i5 CPU       M 520  @ 2.40GHz
  Stepping:            5
  CPU MHz:             2320.620
  CPU max MHz:         2400.0000
  CPU min MHz:         1199.0000
  BogoMIPS:            4787.94
  Virtualization:      VT-x
  L1d cache:           32K
  L1i cache:           32K
  L2 cache:            256K
  L3 cache:            3072K
  NUMA node0 CPU(s):   0-3
  Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt aes lahf_lm pti tpr_shadow vnmi flexpriority ept vpid dtherm ida arat

Hardware interrupts
  IRQ   0 PID      count          34,0,0,0 Sched     priority     drivers IO-APIC,2-edge,timer
  IRQ   1 PID      count          0,0,31,0 Sched     priority     drivers IO-APIC,1-edge,i8042
  IRQ   5 PID      count           0,0,0,0 Sched     priority     drivers IO-APIC,5-edge,parport0
  IRQ   8 PID      count           0,0,0,1 Sched     priority     drivers IO-APIC,8-edge,rtc0
  IRQ   9 PID      count        0,1522,0,0 Sched     priority     drivers IO-APIC,9-fasteoi,acpi
  IRQ  12 PID      count       0,21796,0,0 Sched     priority     drivers IO-APIC,12-edge,i8042
  IRQ  16 PID      count         0,370,0,0 Sched     priority     drivers IO-APIC,16-fasteoi,ehci_hcd:usb1
  IRQ  18 PID      count           0,0,0,0 Sched     priority     drivers IO-APIC,18-fasteoi,ips
  IRQ  20 PID      count        0,0,5001,0 Sched     priority     drivers IO-APIC,20-fasteoi,ehci_hcd:usb2,,firewire_ohci
  IRQ  22 PID      count           0,0,0,6 Sched     priority     drivers IO-APIC,22-fasteoi,mmc0,,yenta,,pata_pcmcia[0.0]
  IRQ  23 PID      count           0,0,0,0 Sched     priority     drivers IO-APIC,23-edge,lis3lv02d
  IRQ  24 PID      count           0,0,0,0 Sched     priority     drivers PCI-MSI,458752-edge,PCIe,PME
  IRQ  25 PID      count           0,0,0,0 Sched     priority     drivers PCI-MSI,460800-edge,PCIe,PME,,pciehp
  IRQ  26 PID      count           0,0,0,0 Sched     priority     drivers PCI-MSI,464896-edge,PCIe,PME
  IRQ  27 PID      count        3,4692,0,0 Sched     priority     drivers PCI-MSI,409600-edge,enp0s25
  IRQ  28 PID      count       29942,0,0,0 Sched     priority     drivers PCI-MSI,512000-edge,ahci[0000:00:1f.2]
  IRQ  29 PID      count      0,623,6059,0 Sched     priority     drivers PCI-MSI,32768-edge,i915
  IRQ  30 PID      count          0,24,0,0 Sched     priority     drivers PCI-MSI,360448-edge,mei_me
  IRQ  31 PID      count        0,0,1637,0 Sched     priority     drivers PCI-MSI,442368-edge,snd_hda_intel:card0

Software interrupts

module directory          /lib/modules/4.19.0-6-amd64
Old 1394 stack
  ieee1394 not present
  ieee1394 not loaded
  ohci1394 not present
  ohci1394 not loaded
  raw1394 not present
  raw1394 not loaded
stack active              False
statically linked         False
New 1394 stack
  firewire-core present
  firewire-core loaded
  firewire-ohci present
  firewire-ohci loaded
stack active              True
statically linked         False
Kernel support:
  The new FireWire kernel stack is loaded.
  If running a kernel earlier than 2.6.37 and problems are experienced, either
  try with the old Firewire kernel stack or upgrade to a newer kernel
  (preferrably 2.6.37 or later).
root@neufdegres:/home/neufdegres#



et

root@neufdegres:/home/neufdegres# ffado-test ListDevices
-----------------------------------------------
FFADO test and diagnostic utility
Part of the FFADO project -- www.ffado.org
Version: 2.4.1
(C) 2008, Daniel Wagner, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------

=== 1394 PORT 0 ===
  Node id  GUID                  VendorId     ModelId   Vendor - Model
   0       0x5566778811223344  0x00556677  0x00000000   Linux Firewire - 
no message buffer overruns
root@neufdegres:/home/neufdegres#



je crois que je n'est pas les pilotes , d'ailleurs aussi l 'ordi est équipé de bluetouf,wifi, possibilité puce gsm , mais j'ai pas tout compris pour installer.

encore merci

dlb utilisateur non connecté
Bonsoir Florentdu19,

Alors la commande ffado-diag montre que ton port firewire ( FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 ) est bien monté au niveau du bios, d'aute part, les modules firewire du noyau ( The new FireWire kernel stack is loaded.) sont bien présents, ça c'est bon.

Le retour de la commande ffado-test est moins probant ... La commande ne détecte que le port firewire de ton ordinateur. Ta carte aurait dû apparaître ... Elle ne semble pas détectée.

Vérifie quand même que ta carte Onyx est bien allumée, et donne le résultat de la commande

lsmod


Le module snd-dice, ( ou snd-bebob ou snd-oxfw, la littérature est un peu floue sur le sujet ... ) devrait apparaître, l'un de ces trois modules devrait être monté pour piloter ta carte.

Florentdu19 utilisateur non connecté
Bonjour dlb,

Lors du précédent poste , je n'avais pas la carte son a proximité, ce qui explique la non détection de celle-ci ..

j'ai lancer "Cadence" fait un forçage et oh bonheur , la table est apparu !!!
je ne sais pas ou j'ai buggé !

un grand merci !!

Résolu

Afficher les articles :
Aller au forum :

Documentation [Afficher / Cacher]

Faire un don
[Afficher / Cacher]

Connexion
[Afficher / Cacher]



Mégaphone [Afficher / Cacher]

calixtus06, 09:30, mer. 27 mars 2024: Bonjour et bienvenue à Noar :-)
olinuxx, 18:50, lun. 25 mars 2024: Bonjour et bienvenue à Ted Demore cool
olinuxx, 17:52, dim. 24 mars 2024: Bonjour et bienvenue à Noitavon cool
calixtus06, 11:07, jeu. 21 mars 2024: Bonjour et bienvenue à obds, ceric :-)
obds, 16:12, mar. 19 mars 2024: Cet édito est juste parfait. Trop beau !
olinuxx, 11:48, ven. 15 mars 2024: Bonjour et bienvenue à Jerry cool
calixtus06, 18:03, mer. 13 mars 2024: Bonjour et bienvenue à tanguero :-)
olinuxx, 11:01, dim. 10 mars 2024: Bonjour et bienvenue à lolo cool
bda, 16:59, sam. 09 mars 2024: Chapeau pour l'édito. Vous êtes au top les gars :-)
allany, 07:20, jeu. 07 mars 2024: Ça ne fait jamais de mal, c'est l'éditorial ! [Lien]
olinuxx, 19:52, mer. 06 mars 2024: Bonjour et bienvenue à TrkNrk cool
calixtus06, 11:17, mar. 05 mars 2024: Bonjour et bienvenue à D752 :-)