Chargement...
 
[Voir/Cacher menus de gauche]
[Voir/Cacher menus de droite]

4 - Toutes les autres applications, les émulateurs...

> Forums de discussion > 4 - Toutes les autres applications, les émulateurs... > [ABANDONNE]comprendre le message d'erreur au lancement
Dernier post

[ABANDONNE]comprendre le message d'erreur au lancement

calixtus06 Articles : 459 utilisateur non connecté
Image

Salut, comment dois-je comprendre ce message et comment y remédier ?

Merci d'avance !!

Nico

olinuxx Articles : 13366 utilisateur non connecté France
Il te dit qu'il y a un soucis avec le chargement du module snd_usb_toneport.

Sur mon ordi, si je lance la commande :
/sbin/modinfo snd_usb_toneport
celle-ci me dit qu'il s'agit d'un module du noyau qui est le pilote pour le matériel "TonePort USB". As-tu ce matériel ?

Autre question (penses-y à chaque fois que tu postes un message step) : quelle distribution utilises-tu ?
Et quel noyau également : commande
uname -a


calixtus06 Articles : 459 utilisateur non connecté
Salut !

Y a t il justement un moyen de mettre son matériel informatique et carte son en "signature" des posts ?

J'utilise librazik

Concernant le toneport c'est plus ou moins le nom de ma carte son branchée en usb ( ux2 de line 6)

uname -a

Linux nicolasMAO 4.9.0-0.bpo.2-amd64 #1 SMP Debian 4.9.13-1~bpo8+1 (2017-02-27) x86_64 GNU/Linux
nicolas@nicolasMAO:~$


nicolas@nicolasMAO:~$ /sbin/modinfo snd_usb_toneport


filename: /lib/modules/4.9.0-0.bpo.2-amd64/kernel/sound/usb/line6/snd-usb-toneport.ko
license:        GPL
description:    TonePort USB driver
alias:          usb:v0E41p4142d*dc*dsc*dp*ic*isc*ip*in00*
alias:          usb:v0E41p4141d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0E41p4147d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0E41p4151d*dc*dsc*dp*ic*isc*ip*in00*
alias:          usb:v0E41p4150d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0E41p4153d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0E41p4750d*dc*dsc*dp*ic*isc*ip*in*
depends:        snd-usb-line6,usbcore,snd
intree:         Y
vermagic:       4.9.0-0.bpo.2-amd64 SMP mod_unload modversions 
nicolas@nicolasMAO:~$

merci !

olinuxx Articles : 13366 utilisateur non connecté France
calixtus écrit :
Y a t il justement un moyen de mettre son matériel informatique et carte son en "signature" des posts ?


Merci d'ouvrir un autre fil de discussion dans la section de forum kivabien.


calixtus06 écrit :
Concernant le toneport c'est plus ou moins le nom de ma carte son branchée en usb ( ux2 de line 6)


Essaie de démarrer avec ton ux2 débranchée puis branche là ensuite. Et donne nous les 20 dernières lignes de la commande "dmesg".

calixtus06 Articles : 459 utilisateur non connecté
je m'y suis pris en deux fois. Mais ça démarre à 0.27

[    0.273973] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.273973] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.273973] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *9
[    0.273973] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.273973] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.274074] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.274207] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[    0.274339] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.274474] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.274607] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.274739] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.274871] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.275004] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.275136] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.275270] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.275403] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.275535] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[    0.275669] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[    0.275800] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[    0.275933] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
[    0.276076] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[    0.276210] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.276356] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.276489] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *9
[    0.276622] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
[    0.276756] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[    0.276888] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[    0.277021] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[    0.277155] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[    0.277290] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[    0.277421] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[    0.277553] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[    0.277894] ACPI : EC: event unblocked
[    0.277916] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.277918] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.280023] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.280024] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.280026] vgaarb: loaded
[    0.280027] vgaarb: bridge control possible 0000:02:00.0
[    0.280097] PCI: Using ACPI for IRQ routing
[    0.281084] PCI: pci_cache_line_size set to 64 bytes
[    0.281172] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.281174] e820: reserve RAM buffer [mem 0xdffa8000-0xdfffffff]
[    0.281605] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.281611] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.281616] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[    0.284020] clocksource: Switched to clocksource hpet
[    0.294809] VFS: Disk quotas dquot_6.6.0
[    0.294855] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.294996] pnp: PnP ACPI init
[    0.295198] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.295287] pnp 00:01: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.295735] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.295737] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.295739] system 00:02: [io  0x4000-0x407f] has been reserved
[    0.295741] system 00:02: [io  0x4080-0x40ff] has been reserved
[    0.295745] system 00:02: [io  0x4400-0x447f] has been reserved
[    0.295747] system 00:02: [io  0x4480-0x44ff] has been reserved
[    0.295749] system 00:02: [io  0x4800-0x487f] has been reserved
[    0.295751] system 00:02: [io  0x4880-0x48ff] has been reserved
[    0.295754] system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.295756] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.295758] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
[    0.295760] system 00:02: [mem 0xfefe2000-0xfefe3fff] has been reserved
[    0.295762] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.295764] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.295768] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.295860] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.295961] system 00:04: [io  0x0250-0x0253] has been reserved
[    0.295963] system 00:04: [io  0x0256-0x025f] has been reserved
[    0.295965] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.295967] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.295971] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.296129] system 00:05: [io  0x5000-0x507f] has been reserved
[    0.296131] system 00:05: [io  0x5080-0x50ff] has been reserved
[    0.296134] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.296241] system 00:06: [mem 0xfc000000-0xfdffffff] has been reserved
[    0.296244] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.296528] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.296530] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.296532] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.296535] system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.296537] system 00:07: [mem 0xfc000000-0xffffffff] could not be reserved
[    0.296540] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.297479] pnp: PnP ACPI: found 8 devices
[    0.304883] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.304958] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.304969] pci 0000:00:0c.0: PCI bridge to [bus 02]
[    0.304973] pci 0000:00:0c.0:   bridge window [io  0xd000-0xdfff]
[    0.304984] pci 0000:00:0c.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.304991] pci 0000:00:0c.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.305004] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.305009] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.305019] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.305037] pci 0000:00:16.0: PCI bridge to [bus 04]
[    0.305047] pci 0000:00:16.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.305067] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.305068] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.305070] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.305072] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.305074] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfbffffff window]
[    0.305075] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff window]
[    0.305077] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.305079] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.305081] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.305083] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.305084] pci_bus 0000:01: resource 8 [mem 0xe0000000-0xfbffffff window]
[    0.305086] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff window]
[    0.305088] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.305090] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.305091] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.305093] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.305095] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.305097] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.305229] NET: Registered protocol family 2
[    0.305477] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.305622] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.305850] TCP: Hash tables configured (established 32768 bind 32768)
[    0.305917] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.305952] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.306038] NET: Registered protocol family 1
[    0.306406] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.400369] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.400719] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[    0.480349] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[    0.480556] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.480570] PCI: CLS 64 bytes, default 64
[    0.480649] Unpacking initramfs...
[    1.008593] Freeing initrd memory: 24688K (ffff93c9f4fb8000 - ffff93c9f67d4000)
[    1.008600] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.008603] software IO TLB [mem 0xdbfa8000-0xdffa8000] (64MB) mapped at [ffff93ca9bfa8000-ffff93ca9ffa7fff]
[    1.009278] audit: initializing netlink subsys (disabled)
[    1.009315] audit: type=2000 audit(1491979560.008:1): initialized
[    1.009726] Initialise system trusted keyrings
[    1.009863] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.009894] zbud: loaded
[    1.076761] Key type asymmetric registered
[    1.076762] Asymmetric key parser 'x509' registered
[    1.076792] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.076827] io scheduler noop registered
[    1.076828] io scheduler deadline registered
[    1.076844] io scheduler cfq registered (default)
[    1.077266] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[    1.077672] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[    1.078055] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[    1.078208] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.078215] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.078239] intel_idle: does not run on family 6 model 23
[    1.078886] Monitor-Mwait will be used to enter C-1 state
[    1.078891] Monitor-Mwait will be used to enter C-3 state
[    1.078894] Monitor-Mwait will be used to enter C-3 state
[    1.078905] tsc: Marking TSC unstable due to TSC halts in idle
[    1.079344] GHES: HEST is not enabled!
[    1.079430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.080044] Linux agpgart interface v0.103
[    1.080114] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.080114] AMD IOMMUv2 functionality not available on this system
[    1.080362] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.084186] i8042: Detected active multiplexing controller, rev 1.1
[    1.086723] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.086728] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.086773] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.086813] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.086852] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.087052] mousedev: PS/2 mouse device common for all mice
[    1.087114] rtc_cmos 00:03: RTC can wake from S4
[    1.087408] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.087494] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.087524] ledtrig-cpu: registered to indicate activity on CPUs
[    1.087979] NET: Registered protocol family 10
[    1.088258] mip6: Mobile IPv6
[    1.088260] NET: Registered protocol family 17
[    1.088264] mpls_gso: MPLS GSO support
[    1.088481] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[    1.088541] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.088722] registered taskstats version 1
[    1.088724] Loading compiled-in X.509 certificates
[    1.090832] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.091240] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.091262] zswap: loaded using pool lzo/zbud
[    1.091878] rtc_cmos 00:03: setting system clock to 2017-04-12 06:46:01 UTC (1491979561)
[    1.091937] PM: Hibernation image not present or could not be loaded.
[    1.093820] Freeing unused kernel memory: 1396K (ffffffffa9d2d000 - ffffffffa9e8a000)
[    1.093822] Write protecting the kernel read-only data: 12288k
[    1.095322] Freeing unused kernel memory: 2032K (ffff93ca02804000 - ffff93ca02a00000)
[    1.101041] Freeing unused kernel memory: 1244K (ffff93ca02cc9000 - ffff93ca02e00000)
[    1.110671] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.123943] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.124081] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.124093] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.124108] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.125131] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.125183] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.126757] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.126847] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.126927] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.127012] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.131688] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.201676] ACPI: bus type USB registered
[    1.201711] usbcore: registered new interface driver usbfs
[    1.201727] usbcore: registered new interface driver hub
[    1.201770] usbcore: registered new device driver usb
[    1.210782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.211634] ehci-pci: EHCI PCI platform driver
[    1.211866] ehci-pci 0000:00:04.1: EHCI Host Controller
[    1.211879] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    1.211891] ehci-pci 0000:00:04.1: debug port 1
[    1.211933] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    1.213710] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.217426] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.217560] ehci-pci 0000:00:04.1: irq 22, io mem 0xf7f7ec00
[    1.232094] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    1.232202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.232204] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.232206] usb usb1: Product: EHCI Host Controller
[    1.232207] usb usb1: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[    1.232209] usb usb1: SerialNumber: 0000:00:04.1
[    1.232422] hub 1-0:1.0: USB hub found
[    1.232431] hub 1-0:1.0: 11 ports detected
[    1.234618] ehci-pci 0000:00:06.1: EHCI Host Controller
[    1.234625] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[    1.234635] ehci-pci 0000:00:06.1: debug port 1
[    1.234663] ehci-pci 0000:00:06.1: cache line size of 64 is not supported
[    1.235346] ehci-pci 0000:00:06.1: irq 20, io mem 0xf7f7e800
[    1.248093] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.00
[    1.248209] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.248212] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.248213] usb usb2: Product: EHCI Host Controller
[    1.248215] usb usb2: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[    1.248216] usb usb2: SerialNumber: 0000:00:06.1
[    1.248425] hub 2-0:1.0: USB hub found
[    1.248434] hub 2-0:1.0: 5 ports detected
[    1.250318] ohci-pci: OHCI PCI platform driver
[    1.250444] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    1.250451] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[    1.253777] ohci-pci 0000:00:04.0: irq 23, io mem 0xf7f7f000
[    1.314170] SCSI subsystem initialized
[    1.314269] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.314272] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.314273] usb usb3: Product: OHCI PCI host controller
[    1.314275] usb usb3: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ohci_hcd
[    1.314276] usb usb3: SerialNumber: 0000:00:04.0
[    1.315936] hub 3-0:1.0: USB hub found
[    1.315947] hub 3-0:1.0: 11 ports detected
[    1.316582] ohci-pci 0000:00:06.0: OHCI PCI host controller
[    1.316589] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[    1.316674] ohci-pci 0000:00:06.0: irq 21, io mem 0xf7f7d000
[    1.325889] thermal LNXTHERM:00: registered as thermal_zone0
[    1.325891] ACPI: Thermal Zone [THRM] (60 C)
[    1.330116] libata version 3.00 loaded.
[    1.330218] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.330235] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.330544] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[    1.330968] r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xffffb31900679000, 00:26:18:62:c0:c9, XID 18000000 IRQ 24
[    1.330970] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    1.382104] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.382108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.382110] usb usb4: Product: OHCI PCI host controller
[    1.382111] usb usb4: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ohci_hcd
[    1.382113] usb usb4: SerialNumber: 0000:00:06.0
[    1.382360] hub 4-0:1.0: USB hub found
[    1.382371] hub 4-0:1.0: 5 ports detected
[    1.382852] ahci 0000:00:0b.0: version 3.0
[    1.383156] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[    1.383194] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[    1.383330] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[    1.383332] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs 
[    1.401807] scsi host0: ahci
[    1.409454] scsi host1: ahci
[    1.419528] scsi host2: ahci
[    1.427720] scsi host3: ahci
[    1.436061] scsi host4: ahci
[    1.446777] scsi host5: ahci
[    1.446909] ata1: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76100 irq 25
[    1.446911] ata2: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76180 irq 25
[    1.446912] ata3: DUMMY
[    1.446913] ata4: DUMMY
[    1.446914] ata5: DUMMY
[    1.446915] ata6: DUMMY
[    1.564024] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    1.757099] usb 1-5: New USB device found, idVendor=064e, idProduct=a116
[    1.757101] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.757102] usb 1-5: Product: USB2.0 UVC 1.3M WebCam
[    1.757104] usb 1-5: Manufacturer: SuYin
[    1.757105] usb 1-5: SerialNumber: CN1316-S30B-MI033-VS-R03.02.04
[    1.762848] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.777710] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100
[    1.777713] ata2.00: applying bridge limits
[    1.792269] ata2.00: configured for UDMA/100
[    1.940136] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.941003] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[    1.941005] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.942025] ata1.00: configured for UDMA/100
[    1.942278] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 C70P PQ: 0 ANSI: 5
[    1.990855] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633A  AS00 PQ: 0 ANSI: 5
[    1.992014] random: fast init done
[    2.012154] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e44e9c0454, max_idle_ns: 440795309354 ns
[    2.020951] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.021652] sd 0:0:0:0: [sda] Write Protect is off
[    2.021655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.021682] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.040383] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.040387] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.040600] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.259425] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[    2.296025] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[    2.332558] psmouse serio4: elantech: Elan sample query result 1a, 00, 00
[    2.461066]  sda: sda1 sda2 < sda5 >
[    2.461650] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.467984] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
[    2.931181] device-mapper: uevent: version 1.0.3
[    2.931301] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    3.004028] raid6: sse2x1   gen()  3357 MB/s
[    3.072026] raid6: sse2x1   xor()  3549 MB/s
[    3.140032] raid6: sse2x2   gen()  3859 MB/s
[    3.208028] raid6: sse2x2   xor()  4325 MB/s
[    3.276025] raid6: sse2x4   gen()  6135 MB/s
[    3.344028] raid6: sse2x4   xor()  4928 MB/s
[    3.344029] raid6: using algorithm sse2x4 gen() 6135 MB/s
[    3.344030] raid6: .... xor() 4928 MB/s, rmw enabled
[    3.344031] raid6: using ssse3x2 recovery algorithm
[    3.345021] xor: measuring software checksum speed
[    3.384008]    prefetch64-sse:  8857.000 MB/sec
[    3.424007]    generic_sse:  7781.000 MB/sec
[    3.424008] xor: using function: prefetch64-sse (8857.000 MB/sec)
[    3.491010] Btrfs loaded, crc32c=crc32c-generic
[    3.561636] PM: Starting manual resume from disk
[    3.561640] PM: Hibernation image partition 8:5 present
[    3.561641] PM: Looking for hibernation image.
[    3.561840] PM: Image not found (code -22)
[    3.561841] PM: Hibernation image not present or could not be loaded.
[    3.757225] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.206896] random: crng init done
[    5.591136] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    5.742506] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.742693] systemd[1]: Detected architecture x86-64.
[    5.757108] systemd[1]: Set hostname to <nicolasMAO>.
[    7.206055] systemd[1]: Listening on Journal Audit Socket.
[    7.206166] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.206212] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.206270] systemd[1]: Listening on Journal Socket.
[    7.206327] systemd[1]: Listening on udev Control Socket.
[    7.206364] systemd[1]: Listening on udev Kernel Socket.
[    7.206409] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.278803] lp: driver loaded but no devices found
[    8.307480] ppdev: user-space parallel port driver
[    8.542880] fuse init (API version 7.26)
[   10.519498] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.654571] systemd-journald[685]: Received request to flush runtime journal from PID 1
[   11.047441] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[   11.047446] ACPI Warning: SystemIO range 0x0000000000004E00-0x0000000000004E3F conflicts with OpRegion 0x0000000000004E00-0x0000000000004E3F (\_SB.PCI0.SM00) (20160831/utaddress-247)
[   11.047452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.057812] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9
[   11.057818] ACPI: Power Button [PWRB]
[   11.057885] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[   11.057887] ACPI: Sleep Button [SLPB]
[   11.080337] nv_tco: NV TCO WatchDog Timer Driver v0.01
[   11.080446] nv_tco: Watchdog reboot not detected
[   11.080512] nv_tco: initialized (0x4440). heartbeat=30 sec (nowayout=0)
[   11.129276] wmi: Mapper loaded
[   11.173808] ACPI: AC Adapter [AC0] (on-line)
[   11.216496] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11
[   11.227711] ACPI: Battery Slot [BAT0] (battery present)
[   11.375522] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   11.380108] ACPI: Lid Switch [LID]
[   11.380277] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[   11.380281] ACPI: Power Button [PWRF]
[   11.381432] acpi device:2b: registered as cooling_device2
[   11.381527] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:28/LNXVIDEO:00/input/input13
[   11.707289] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[   11.707302] snd_hda_intel 0000:00:08.0: Disabling MSI
[   11.784359] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.784425] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   11.799726] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.311783] asus_laptop: Asus Laptop Support version 0.42
[   12.311903] asus_laptop: BSTS called, 0xff5d returned
[   12.311916] asus_laptop:   K70IO model detected
[   12.312328] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input14
[   12.561096] [drm] Initialized
[   13.007106] intel_powerclamp: No package C-state available
[   13.040464] intel_powerclamp: No package C-state available
[   13.146984] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[   13.181204] media: Linux media interface: v0.10
[   13.194080] ath: phy0: Enable LNA combining
[   13.195504] ath: EEPROM regdomain: 0x60
[   13.195505] ath: EEPROM indicates we should expect a direct regpair map
[   13.195508] ath: Country alpha2 being used: 00
[   13.195509] ath: Regpair used: 0x60
[   13.252805] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.253149] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffb31900af0000, irq=18
[   13.444037] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.444040] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.444042] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   13.444044] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   13.444045] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   13.444047] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   13.444050] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   13.471864] Linux video capture interface: v2.00
[   13.483861] MXM: GUID detected in BIOS
[   13.484000] ACPI Warning: \_SB.PCI0.XVR0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   13.484095] ACPI: \_SB_.PCI0.XVR0.VGA_: failed to evaluate _DSM
[   13.484440] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 17
[   13.484719] nouveau 0000:02:00.0: NVIDIA G96 (096980c1)
[   13.519678] nouveau 0000:02:00.0: bios: version 62.94.79.00.0b
[   13.540895] nouveau 0000:02:00.0: bios: M0203T not found
[   13.540898] nouveau 0000:02:00.0: bios: M0203E not matched!
[   13.540901] nouveau 0000:02:00.0: fb: 1024 MiB DDR2
[   13.572734] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116)
[   13.589069] uvcvideo 1-5:1.0: Entity type for entity Extension 5 was not initialized!
[   13.589074] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   13.589077] uvcvideo 1-5:1.0: Entity type for entity Processing 3 was not initialized!
[   13.589079] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[   13.589286] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input15
[   13.589488] usbcore: registered new interface driver uvcvideo
[   13.589490] USB Video Class driver (1.1.1)
[   13.596420] [TTM] Zone  kernel: Available graphics memory: 2025182 kiB
[   13.596423] [TTM] Initializing pool allocator
[   13.596435] [TTM] Initializing DMA pool allocator
[   13.596469] nouveau 0000:02:00.0: DRM: VRAM: 1024 MiB
[   13.596471] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[   13.596476] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[   13.596478] nouveau 0000:02:00.0: DRM: DCB version 4.0
[   13.596481] nouveau 0000:02:00.0: DRM: DCB outp 00: 01800323 00010034
[   13.596483] nouveau 0000:02:00.0: DRM: DCB outp 01: 02811300 00000028
[   13.596485] nouveau 0000:02:00.0: DRM: DCB outp 02: 04822312 00020010
[   13.596487] nouveau 0000:02:00.0: DRM: DCB conn 00: 00000040
[   13.596489] nouveau 0000:02:00.0: DRM: DCB conn 01: 00000100
[   13.596491] nouveau 0000:02:00.0: DRM: DCB conn 02: 00001261
[   13.596493] nouveau 0000:02:00.0: DRM: DCB conn 07: 00000413
[   13.602377] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.602379] [drm] Driver supports precise vblank timestamp query.
[   13.628605] nouveau 0000:02:00.0: DRM: MM: using CRYPT for buffer copies
[   14.894647] nouveau 0000:02:00.0: DRM: allocated 1600x900 fb: 0x70000, bo ffff93cad9ad3400
[   14.894801] fbcon: nouveaufb (fb0) is primary device
[   15.165260] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
[   15.166263] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
[   15.166489] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
[   15.211426] Adding 6369276k swap on /dev/sda5.  Priority:-1 extents:1 across:6369276k FS
[   15.268292] Console: switching to colour frame buffer device 200x56
[   15.270840] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[   15.284110] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[   28.297310] r8169 0000:03:00.0 eth0: link down
[   31.557592] wlan0: authenticate with 14:0c:76:f8:6d:28
[   31.570471] wlan0: send auth to 14:0c:76:f8:6d:28 (try 1/3)
[   31.572179] wlan0: authenticated
[   31.576055] wlan0: associate with 14:0c:76:f8:6d:28 (try 1/3)
[   31.579418] wlan0: RX AssocResp from 14:0c:76:f8:6d:28 (capab=0x411 status=0 aid=2)
[   31.579532] wlan0: associated
[  128.600021] usb 3-2: new full-speed USB device number 2 using ohci-pci
[  128.830041] usb 3-2: New USB device found, idVendor=0e41, idProduct=4151
[  128.830043] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  128.830045] usb 3-2: Product: UX2
[  128.830047] usb 3-2: Manufacturer: Line 6
[  128.902569] snd_usb_toneport 3-2:1.0: Line 6 POD Studio UX2 found
[  128.909152] ------------[ cut here ]------------
[  128.909183] WARNING: CPU: 0 PID: 2815 at /home/zumbi/linux-4.9.13/drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x39a/0x560 [usbcore]
[  128.909184] transfer buffer not dma capable
[  128.909185] Modules linked in: snd_usb_toneport(+) snd_usb_line6 ctr ccm snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device cpufreq_powersave cpufreq_conservative cpufreq_userspace binfmt_misc snd_hda_codec_hdmi uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core nouveau videodev snd_hda_codec_realtek snd_hda_codec_generic arc4 media ath9k ath9k_common ath9k_hw ath mac80211 coretemp ttm drm_kms_helper kvm_intel drm cfg80211 kvm asus_laptop i2c_algo_bit mxm_wmi sparse_keymap rfkill shpchp sg snd_hda_intel snd_hda_codec snd_hda_core irqbypass snd_hwdep snd_pcm_oss evdev joydev input_polldev snd_mixer_oss serio_raw snd_pcm snd_timer snd soundcore video battery ac wmi nv_tco button i2c_nforce2 acpi_cpufreq tpm_tis tpm_tis_core tpm fuse parport_pc ppdev
[  128.909237]  lp parport autofs4 ext4 crc16 jbd2 fscrypto mbcache crc32c_generic btrfs xor raid6_pq dm_mod sr_mod cdrom sd_mod psmouse ahci libahci r8169 libata mii scsi_mod thermal ohci_pci fjes ohci_hcd ehci_pci ehci_hcd usbcore usb_common
[  128.909259] CPU: 0 PID: 2815 Comm: systemd-udevd Not tainted 4.9.0-0.bpo.2-amd64 #1 Debian 4.9.13-1~bpo8+1
[  128.909260] Hardware name: ASUSTeK Computer Inc.  K70IO               /K70IO     , BIOS 208     06/22/2009
[  128.909262]  0000000000000000 ffffffffa9329cd5 ffffb31901dbf868 0000000000000000
[  128.909265]  ffffffffa90778a4 ffff93cad9712780 ffffb31901dbf8c0 0000000000000000
[  128.909268]  ffffb31901dbfa6c 00000000000000fa 0000000000000002 ffffffffa907791f
[  128.909271] Call Trace:
[  128.909277]  [<ffffffffa9329cd5>] ? dump_stack+0x5c/0x77
[  128.909281]  [<ffffffffa90778a4>] ? __warn+0xc4/0xe0
[  128.909283]  [<ffffffffa907791f>] ? warn_slowpath_fmt+0x5f/0x80
[  128.909293]  [<ffffffffc027b1fa>] ? usb_hcd_map_urb_for_dma+0x39a/0x560 [usbcore]
[  128.909297]  [<ffffffffa90afd57>] ? put_prev_entity+0x77/0x840
[  128.909306]  [<ffffffffc027b5a0>] ? usb_hcd_submit_urb+0x1e0/0xa50 [usbcore]
[  128.909309]  [<ffffffffa902476b>] ? __switch_to+0x2bb/0x700
[  128.909312]  [<ffffffffa95f6695>] ? __schedule+0x245/0x6d0
[  128.909322]  [<ffffffffc027d78d>] ? usb_start_wait_urb+0x6d/0x170 [usbcore]
[  128.909332]  [<ffffffffc027d96c>] ? usb_control_msg+0xdc/0x130 [usbcore]
[  128.909338]  [<ffffffffc0ceec52>] ? line6_read_data+0x102/0x220 [snd_usb_line6]
[  128.909342]  [<ffffffffc0d2149c>] ? toneport_init+0x9c/0x1c5 [snd_usb_toneport]
[  128.909345]  [<ffffffffc0cef1aa>] ? line6_probe+0x24a/0x470 [snd_usb_line6]
[  128.909347]  [<ffffffffc0d21400>] ? line6_toneport_disconnect+0x60/0x60 [snd_usb_toneport]
[  128.909351]  [<ffffffffa9478fa6>] ? __pm_runtime_set_status+0x166/0x270
[  128.909361]  [<ffffffffc0281e42>] ? usb_probe_interface+0x152/0x300 [usbcore]
[  128.909363]  [<ffffffffa946db4e>] ? driver_probe_device+0x21e/0x430
[  128.909365]  [<ffffffffa946de36>] ? __driver_attach+0xd6/0xe0
[  128.909366]  [<ffffffffa946dd60>] ? driver_probe_device+0x430/0x430
[  128.909369]  [<ffffffffa946b7b7>] ? bus_for_each_dev+0x67/0xb0
[  128.909371]  [<ffffffffa946cde0>] ? bus_add_driver+0x40/0x260
[  128.909373]  [<ffffffffa946e827>] ? driver_register+0x57/0xd0
[  128.909383]  [<ffffffffc02807ec>] ? usb_register_driver+0x7c/0x140 [usbcore]
[  128.909384]  [<ffffffffc026d000>] ? 0xffffffffc026d000
[  128.909387]  [<ffffffffa900218c>] ? do_one_initcall+0x4c/0x180
[  128.909388]  [<ffffffffa95f6d54>] ? preempt_schedule_common+0x14/0x20
[  128.909390]  [<ffffffffa95f6d79>] ? _cond_resched+0x19/0x20
[  128.909393]  [<ffffffffa917c3af>] ? do_init_module+0x5a/0x1f1
[  128.909396]  [<ffffffffa9101de9>] ? load_module+0x23c9/0x28f0
[  128.909398]  [<ffffffffa90fe650>] ? __symbol_put+0x60/0x60
[  128.909402]  [<ffffffffa92033a4>] ? vfs_read+0x114/0x130
[  128.909406]  [<ffffffffa92a3e01>] ? security_capable+0x41/0x60
[  128.909408]  [<ffffffffa91024fe>] ? SYSC_finit_module+0x8e/0xe0
[  128.909410]  [<ffffffffa95fb3fb>] ? system_call_fast_compare_end+0xc/0x9b
[  128.909412] ---[ end trace 509009569eeeaaa2 ]---
[  128.909416] snd_usb_toneport 3-2:1.0: receive length failed (error -11)
[  128.911061] snd_usb_toneport 3-2:1.0: read request failed (error -32)
[  128.911071] snd_usb_toneport 3-2:1.0: write request failed (error -11)
[  128.918884] snd_usb_toneport 3-2:1.0: Line 6 POD Studio UX2 now attached
[  128.918914] usbcore: registered new interface driver snd_usb_toneport
root@nicolasMAO:/home/nicolas#


Les dernières lignes sont surlignées en rouge

calixtus06 Articles : 459 utilisateur non connecté
j'ai cru comprendre que tu partais quelques temps..

olinuxx Articles : 13366 utilisateur non connecté France
Il semble qu'il y ait un problème avec le pilote noyau toneport. Essaie avec un (ou des) autre noyau (genre un noyau "BL" librazik") disponible et installable avec synaptic.

calixtus06 Articles : 459 utilisateur non connecté
Salut dans synaptic je cherche BL et Librazik, je vois des headers, des low-kernel. Que dois je choisir ? Et dois éliminer le pilote noyau toneport ? Et si oui comment ?

Image

Image

Merci à toi

calixtus06 Articles : 459 utilisateur non connecté
Olivier si tu passes par là ..pourras tu m'expliquer cette histoire de noyau. Je n'ai pas envie de faire de fausse manip.

olinuxx écrit :
celle-ci me dit qu'il s'agit d'un module du noyau qui est le pilote pour le matériel "TonePort USB". As-tu ce matériel ?

En lien avec un autre post: et bien non , moi j'ai le pod ux2 et non le toneport jusqu'à preuve du contraire


Afficher les articles :
Aller au forum :

Documentation [Afficher / Cacher]

Connexion
[Afficher / Cacher]



Mégaphone [Afficher / Cacher]

programLyrique, 12:02, lun. 21 mai 2018: Les résultats de la joute 13 ! [Lien]
jipeL, 20:08, dim. 20 mai 2018: olinuxx : Je viens de répondre à ton post. Merci d'avance pour ton airde. ;-)
olinuxx, 11:27, dim. 20 mai 2018: Bonjour et bienvenue à Vajrakilaya :-)
jipeL, 10:02, dim. 20 mai 2018: Salut les gars, je viens de mettre un post dans le forum des créations, pourriez vous en prendre connaissance et me donner vos avis. Merci d'avance pour votre collaboration.
sub26nico, 09:56, jeu. 17 mai 2018: Salut et bienvenue à smoky :-)
sub26nico, 23:13, mer. 16 mai 2018: Salut et bienvenue à Nico34160 :-)
sub26nico, 00:39, mer. 16 mai 2018: Salut et bienvenue à olidoc :-)
sub26nico, 23:06, lun. 14 mai 2018: Salut et bienvenue à ilanutsuro :-)
olinuxx, 12:05, lun. 14 mai 2018: Bonjour et bienvenue à jeandupont :-)
sub26nico, 20:36, sam. 12 mai 2018: Salut et bienvenue à Surnaturel94 et Aurore :-)
sub26nico, 01:46, sam. 12 mai 2018: Salut et bienvenue à Flipper3731 :-)
sub26nico, 23:56, mer. 09 mai 2018: Salut et bienvenue à biksi87 et Desdinova :-)