Chargement...
 
[Voir/Cacher menus de gauche]
[Voir/Cacher menus de droite]

1 - Le matériel et les pilotes ALSA, FFADO, ...

Liste des forums Liste des sujets
> Forums de discussion > 1 - Le matériel et les pilotes ALSA, FFADO, ... > [RÉSOLU] Pbs compatibilité matériel. Lexicon alpha / Icon Gboard
Dernier post
Page : 1/2   -   Aller directement à la page : 1  2 

[RÉSOLU] Pbs compatibilité matériel. Lexicon alpha / Icon Gboard

ldu Envoyé par ldu le jeu. 11 Sep 2014 21:43 utilisateur non connecté
Bonjour à tous,
Je suis sous Tango studio.
Mon PC est un ACER 5742.
Je cherche à utiliser sooper looper comme un live looper.
J'ai un PBS quand je connecte en même temps dans Jack:
- ma carte son externe usb Lexicon Alpha.
- mon pedalier midi usb Icon G-board.

Seul le deux periphériques fonctionnent correctement.
avec le pedalier seul je peut changer de piste comme je veux.
je connecte la carte dans Jack le looper fonctionne.
Je vais dans Qjackctl onglet Alsa pour connecter le pedalier, ça crachote, ça plante et sifflement dans les HP. obligé de débrancher la carte, de fermer sooperlooper qui est planté et de couper Jack (qui a du mal à s'arrêter).

j'ai essayé de changer de port usb (j'en ai trois) tjrs le même pbs.

Je ne vois pas quelle piste exploré. Est la carte, le pedalier ou le controleur usb???? sad
Merci à qui pourra m'aider.
Lectures: 7110

Envoyé par utilisateur_anonyme le jeu. 11 Sep 2014 22:04
Hello

Il faudrait que l'on en sache un peu plus je crois: Dejà voir ce que dit jack dans les Messages de Qjackctl.
Voir aussi ta configue de jack.

Le Pédalier c'est juste pour du midi et déclancher les boucles c'est ça?

Un truc que tu peux faire quand jack ne veux pas s'arrêter c'est lui ordonner ceci; (dans un terminal)
killall -KILL jackdbus jackd


Et ensuite faudrait voir si en utilisant a2j -e ce ne serait plus stable qu'avec alsa?
haut de page

ldu Envoyé par ldu le jeu. 11 Sep 2014 23:06 utilisateur non connecté
Merci Pour la réponse.
Le pedalier, c'est pout commander sooper looper, changer les boucle enregistré, arrêter etc etc. ....
Ma config jack est simple:
Pour l'audio: Entrées vers sooperlooper. Sooperlooper vers sortie.
Pour le midi: icon gboard vers sooperlooper.

Pour les messages de qjackctl, je regarde demain.
Pour a2j-e, connais pas je vais jetter un coup d'oeil.
A+
haut de page

olinuxx Envoyé par olinuxx le ven. 12 Sep 2014 07:31 utilisateur non connecté France
informationinfo
Création de la page Lexicon Alpha avec un lien vers ici.
Ajout d'un lien vers ici dans la page ICON G-Board

@ldu, si l'envie t'en prend d'étoffer un peu ces pages plus tard, tu es plusse que le bienvenu.
haut de page

ldu Envoyé par ldu le dim. 14 Sep 2014 11:12 utilisateur non connecté
Bon alors,
explication de ma méthode... qui ne fonctionne pas:
je lance Jack - je lance sooperlooper - je connecte mes entrés et mes sorties sooperlooper/system dans jack- petit test, j'enregistre une boucle en cliquant à la sourie et ça tourne- je connecte le pedalier à Jack (dans l'onglet alsa) et sans même appuyer sur le pedalier, ça plante, ça fait un sifflement dans mes enceintes - je débranche ma carte son.
message Jack avec ma façon de travailler:
__Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2014 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 50
self-connect-mode is "Don't restrict self connect requests"
audio_reservation_init
Acquire audio card Audio2
creating alsa driver ... hw:Alpha|hw:Alpha|512|2|44100|0|0|nomon|swmeter|-|32bit
configuring for 44100Hz, period = 512 frames (11.6 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 24bit little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 24bit little-endian
ALSA: use 2 periods for playback
11:02:16.758 Changement des connexions JACK.
11:02:16.759 Configuration du serveur enregistrée dans « /home/laurent/.jackdrc ».
11:02:16.760 Réinitialisation des statistiques.
11:02:16.767 Client activé.
11:02:16.782 Changement du graphique des connexions JACK.
11:02:41.689 Changement des connexions JACK.
11:02:46.869 Changement des connexions JACK.
11:02:54.849 Changement du graphique des connexions JACK.
11:02:54.887 Changement du graphique des connexions ALSA.
11:02:55.005 Changement des connexions JACK.
11:02:55.006 Changement des connexions ALSA.
11:03:02.526 Changement des connexions JACK.
11:03:06.574 Changement des connexions JACK.
11:03:32.470 Changement du graphique des connexions ALSA.
11:03:32.623 Changement des connexions ALSA.
11:03:59.674 Changement des connexions ALSA.
11:04:00.158 Récupération désynchronisation (XRUN) (1).
11:04:00.838 Récupération de désynchronisation (XRUN) (14 sauté).
11:04:02.839 Récupération de désynchronisation (XRUN) (43 sauté).
11:04:04.841 Récupération de désynchronisation (XRUN) (43 sauté).
11:04:06.842 Récupération de désynchronisation (XRUN) (42 sauté).
11:04:07.768 Changement du graphique des connexions ALSA.
11:04:07.844 Changement des connexions ALSA.
11:04:08.847 Récupération de désynchronisation (XRUN) (43 sauté).
11:04:10.848 Récupération de désynchronisation (XRUN) (43 sauté).
11:04:12.851 Récupération de désynchronisation (XRUN) (42 sauté).
11:04:14.852 Récupération de désynchronisation (XRUN) (43 sauté).
11:04:16.854 Récupération de désynchronisation (XRUN) (43 sauté).
11:04:17.162 Client désactivé.
11:04:17.163 JACK s'arrête...__


ça ne marche donc pas.

J'ai aussi essayer en lançant A2J -e.
Je voyais dons bien mes connections dans l'onglet midi de qjackctl. mais la même pas besoin de connecter le pedalier (dans jack), ça plante dès que je connect mes entrées sorties...

je bloque.
haut de page

Envoyé par utilisateur_anonyme le dim. 14 Sep 2014 18:31
Hello

Faut nous en dire plus car :
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 50
self-connect-mode is "Don't restrict self connect requests"
audio_reservation_init

ça veux dire que tu ne peux pas démarrer jack en RT avec une priorité de 50 % sur l'ensemble de la charge de système t'aura forcément des xruns à tout va ;)

Si tu fais un:
ls /etc/security/limits.d
que te retourne la commande ?
haut de page

ldu Envoyé par ldu le dim. 14 Sep 2014 21:10 utilisateur non connecté
Bonsoir,
si je lance la commande:
laurent@ldu-pc:~$ ls /etc/security/limits.d
audio.conf


Comme je ne sais pas à quoi tu t'attendais...

En tout cas merci de t'interresser à mon pbs.

Ma config de jack en terme de priorité j'avais utilisé le tuto linux mao pour jack en mettant 50 sans trop bien savoir:
Priority : Utilisée lorsque le mode temp-réel est activé, cette option permet de régler le niveau de priorité de Jack par rapport aux autres applications audio temps-réel.
Elle ne doit pas être trop élevée car certaines applications audio ont besoin d'une priorité supérieure à celle de Jack, dont l'utilitaire de surveillance jack_watchdog qui se lance automatiquement avec une priorité supérieure de 10 points.
Typiquement on utilisera une valeur comprise entre 50 et 80, sur une échelle définie lors de la configurations du temps-réel pour les applications sur votre système.


Ceci explique peut etre cela...
haut de page

Envoyé par utilisateur_anonyme le lun. 15 Sep 2014 07:15
Ce que tu cite dans ton post n'a pas lieu d'être car sur ts la configue est conçue pour aller jusqu'à 95 donc si par exemple tu fait ta configue jack avec une priorité de 89 déjà c'est bien. tien regarde ce qu'il dit ton fichier:
pluma /etc/security/limits.d/audio.conf

# Provided by the jackd package.
#
# Changes to this file will be preserved.
#
# If you want to enable/disable realtime permissions, run
#
#    dpkg-reconfigure -p high jackd

@audio   -  rtprio     95
@audio   -  memlock    unlimited
#@audio   -  nice      -19


Ce serait cool d'utiliser Image plutot que Image wink
haut de page

ldu Envoyé par ldu le lun. 15 Sep 2014 21:02 utilisateur non connecté
Salut:

en éditant le fichier audio.conf, j'ai le même résultat que toi.

# Provided by the jackd package.
#
# Changes to this file will be preserved.
#
# If you want to enable/disable realtime permissions, run
#
#    dpkg-reconfigure -p high jackd

@audio   -  rtprio     95
@audio   -  memlock    unlimited
#@audio   -  nice      -19


Par contre toujours les mêmes pbs en utilisant a2j ou sans.
Dès que j'envoie du son dans la carte ça plante.

Je viens de tester avec un autre programe luppp installé par defaut dans Tango Studio: même tarif.
Je ne sais pas si ça viens de Jack ou de mon PC lui même...

Dans la partie réglage de Qjackctl à pilote midi il y "aucun" est ce qu'uun des choix pourrait m'aider.

Mon contrôleur usb ne se marcherait il pas sur les pieds ou mélangerait-il mes deux périfériques?

je sèche...
haut de page

Envoyé par utilisateur_anonyme le lun. 15 Sep 2014 21:37
Oui mais fais moi une capture de tes réglage de jack pour voir ...
haut de page

ldu Envoyé par ldu le jeu. 18 Sep 2014 18:09 utilisateur non connecté
Ci joint:
Image

Avec ces réglages la carte son seul marche.

A+
haut de page

ldu Envoyé par ldu le dim. 21 Sep 2014 12:46 utilisateur non connecté
Nouveau test ce matin,
Test avec Rakarack -> même pbs.

idée à la con... je choisi la carte son de mon PC en sortie.
Et ça marche. Je ne sais pas pourquoi mais je peux jouer, utiliser mon pedalier, pas de plantage.
Je ne sais pas si cela peut aider à résoudre le pbs mais c'est peut être une piste.

a+
haut de page

olinuxx Envoyé par olinuxx le dim. 21 Sep 2014 13:19 utilisateur non connecté France
salut,
quand ca plante avec sifflement, que te dit "dmesg" (message du noyau) ?
haut de page

Envoyé par utilisateur_anonyme le dim. 21 Sep 2014 15:52
A mon avis tu devrai commencer par ta configue jack

  • Echantillon par période (essais) => 512
  • période par tampon (essais) => 2 plutot que 3 parfois c'est mieux ça dépend des cartes ...
  • Nombre de port maximal => 1024
haut de page

ldu Envoyé par ldu le dim. 21 Sep 2014 16:23 utilisateur non connecté
Bonjour,
utilisateur_anonyme, même avec ces réglages ça plante. sad

Pour info, j'ai testé avec en entré la carte son de mon pc et en sortie ma ca lexicon alpha -> ça plante.
C'est vraiment quand j'envoie un signal sur cette carte avec le pédalier connecté que ça plante.

Pour le retour de la commande dmesg... ça fait beaucoup de text. J'ai tout mis mais je ne sais pas si c'est util.

laurent@ldu-pc:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-realtime-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT RT Debian 3.2.57-3+tstudio.2
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-realtime-amd64 root=UUID=58410e4f-09a5-473d-9410-2d188cdd6c7e ro initrd=/install/initrd.gz quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[    0.000000]  BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000093681000 (usable)
[    0.000000]  BIOS-e820: 0000000093681000 - 00000000936bf000 (reserved)
[    0.000000]  BIOS-e820: 00000000936bf000 - 0000000093736000 (usable)
[    0.000000]  BIOS-e820: 0000000093736000 - 00000000937bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000937bf000 - 00000000937de000 (usable)
[    0.000000]  BIOS-e820: 00000000937de000 - 00000000937ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000937ff000 - 0000000093800000 (usable)
[    0.000000]  BIOS-e820: 0000000093800000 - 00000000a0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000158000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Acer Aspire 5742/Aspire 5742, BIOS V1.30 08/13/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x158000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 080000000 mask FE0000000 write-back
[    0.000000]   3 base 098000000 mask FF8000000 uncachable
[    0.000000]   4 base 094000000 mask FFC000000 uncachable
[    0.000000]   5 base 093800000 mask FFF800000 uncachable
[    0.000000]   6 base 100000000 mask F80000000 write-back
[    0.000000]   7 base 158000000 mask FF8000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0x93800 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-0000000093800000
[    0.000000]  0000000000 - 0093800000 page 2M
[    0.000000] kernel direct mapping tables up to 93800000 @ 1fffc000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000158000000
[    0.000000]  0100000000 - 0158000000 page 2M
[    0.000000] kernel direct mapping tables up to 158000000 @ 937db000-937de000
[    0.000000] RAMDISK: 3646e000 - 3722f000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 00000000937fe120 00084 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 00000000937fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 00000000937ea000 0EBDA (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 000000009375a000 00040
[    0.000000] ACPI: ASF! 00000000937fd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: HPET 00000000937fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 00000000937fa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 00000000937f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 00000000937e9000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 00000000937e6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASPT 00000000937e2000 00034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DMAR 00000000937e1000 000B8 (v01 INTEL  CP_DALE  00000001 INTL 00000001)
[    0.000000] ACPI: SSDT 00000000937e0000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000937df000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000937de000 0049F (v01  PmRef    ApTst 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000158000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000158000000
[    0.000000]   NODE_DATA [0000000157ffb000 - 0000000157ffffff]
[    0.000000]  [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880153a00000-ffff880156ffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00158000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x00093681
[    0.000000]     0: 0x000936bf -> 0x00093736
[    0.000000]     0: 0x000937bf -> 0x000937de
[    0.000000]     0: 0x000937ff -> 0x00093800
[    0.000000]     0: 0x00100000 -> 0x00158000
[    0.000000] On node 0 totalpages: 964261
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 585552 pages, LIFO batch:31
[    0.000000]   Normal zone: 4928 pages used for memmap
[    0.000000]   Normal zone: 355520 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000093681000 - 00000000936bf000
[    0.000000] PM: Registered nosave memory: 0000000093736000 - 00000000937bf000
[    0.000000] PM: Registered nosave memory: 00000000937de000 - 00000000937ff000
[    0.000000] PM: Registered nosave memory: 0000000093800000 - 00000000a0000000
[    0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[    0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[    0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe80000
[    0.000000] PM: Registered nosave memory: 00000000ffe80000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 108 pages/cpu @ffff880157200000 s412736 r8192 d21440 u524288
[    0.000000] pcpu-alloc: s412736 r8192 d21440 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 944992
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-realtime-amd64 root=UUID=58410e4f-09a5-473d-9410-2d188cdd6c7e ro initrd=/install/initrd.gz quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3710132k/5636096k available (3479k kernel code, 1779052k absent, 146912k reserved, 2020k data, 912k init)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 2660.022 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.04 BogoMIPS (lpj=2660022)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000039] Security Framework initialized
[    0.000044] AppArmor: AppArmor disabled by boot time parameter
[    0.000472] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.002277] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002675] Mount-cache hash table entries: 256
[    0.002787] Initializing cgroup subsys cpuacct
[    0.002791] Initializing cgroup subsys memory
[    0.002801] Initializing cgroup subsys devices
[    0.002803] Initializing cgroup subsys freezer
[    0.002804] Initializing cgroup subsys net_cls
[    0.002806] Initializing cgroup subsys blkio
[    0.002811] Initializing cgroup subsys perf_event
[    0.002838] CPU: Physical Processor ID: 0
[    0.002839] CPU: Processor Core ID: 0
[    0.002843] mce: CPU supports 9 MCE banks
[    0.002853] CPU0: Thermal monitoring enabled (TM1)
[    0.002860] using mwait in idle threads.
[    0.003180] ACPI: Core revision 20110623
[    0.176802] DMAR: Host address width 36
[    0.176804] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.176810] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[    0.176812] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[    0.176817] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
[    0.176818] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.176823] IOMMU 2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[    0.176824] DMAR: RMRR base: 0x00000091e6e000 end: 0x00000091e8efff
[    0.176826] DMAR: RMRR base: 0x00000097e00000 end: 0x0000009fffffff
[    0.177448] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.187425] CPU0: Intel(R) Core(TM) i5 CPU       M 560  @ 2.67GHz stepping 05
[    0.288364] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.288375] ... version:                3
[    0.288376] ... bit width:              48
[    0.288377] ... generic registers:      4
[    0.288378] ... value mask:             0000ffffffffffff
[    0.288380] ... max period:             000000007fffffff
[    0.288381] ... fixed-purpose events:   3
[    0.288382] ... event mask:             000000070000000f
[    0.304351] Booting Node   0, Processors  #1
[    0.304356] smpboot cpu 1: start_ip = 98000
[    0.401120]  #2
[    0.401124] smpboot cpu 2: start_ip = 98000
[    0.497873]  #3
[    0.497876] smpboot cpu 3: start_ip = 98000
[    0.588698] Brought up 4 CPUs
[    0.588701] Total of 4 processors activated (21279.17 BogoMIPS).
[    0.591028] devtmpfs: initialized
[    0.594438] PM: Registering ACPI NVS region at 93736000 (561152 bytes)
[    0.594601] print_constraints: dummy: 
[    0.594660] NET: Registered protocol family 16
[    0.594760] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.594763] ACPI: bus type pci registered
[    0.594845] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.594848] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.626064] PCI: Using configuration type 1 for base access
[    0.626779] bio: create slab <bio-0> at 0
[    0.626866] ACPI: Added _OSI(Module Device)
[    0.626868] ACPI: Added _OSI(Processor Device)
[    0.626870] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.626872] ACPI: Added _OSI(Processor Aggregator Device)
[    0.628918] ACPI: EC: Look up EC in DSDT
[    0.635600] ACPI: Executed 1 blocks of module-level executable AML code
[    0.651651] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.652202] ACPI: SSDT 0000000093691a18 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.652691] ACPI: Dynamic OEM Table Load:
[    0.652694] ACPI: SSDT           (null) 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.652880] ACPI: SSDT 000000009368f018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.653361] ACPI: Dynamic OEM Table Load:
[    0.653363] ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.663815] ACPI: SSDT 0000000093690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.664368] ACPI: Dynamic OEM Table Load:
[    0.664370] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.667652] ACPI: SSDT 000000009368ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.668146] ACPI: Dynamic OEM Table Load:
[    0.668148] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.680529] ACPI: Interpreter enabled
[    0.680533] ACPI: (supports S0 S3 S4 S5)
[    0.680568] ACPI: Using IOAPIC for interrupt routing
[    1.095740] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.095936] ACPI: No dock devices found.
[    1.095938] HEST: Table not found.
[    1.095940] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.096391] \_SB_.PCI0:_OSC invalid UUID
[    1.096392] _OSC request data:1 8 0 
[    1.096396] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.097121] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.097123] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.097125] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.097127] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff]
[    1.097139] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    1.097155] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    1.097176] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[    1.097186] pci 0000:00:02.0: reg 10: [mem 0xb0000000-0xb03fffff 64bit]
[    1.097191] pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref]
[    1.097196] pci 0000:00:02.0: reg 20: [io  0x3050-0x3057]
[    1.097257] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    1.097284] pci 0000:00:16.0: reg 10: [mem 0xb4406100-0xb440610f 64bit]
[    1.097387] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.097432] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    1.097810] pci 0000:00:1a.0: reg 10: [mem 0xb4405c00-0xb4405fff]
[    1.100001] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.100036] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    1.100057] pci 0000:00:1b.0: reg 10: [mem 0xb4400000-0xb4403fff 64bit]
[    1.100152] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.100183] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    1.100287] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.100319] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    1.100420] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.100465] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    1.100838] pci 0000:00:1d.0: reg 10: [mem 0xb4405800-0xb4405bff]
[    1.103026] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.103054] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    1.103139] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    1.103267] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    1.103299] pci 0000:00:1f.2: reg 10: [io  0x3048-0x304f]
[    1.103310] pci 0000:00:1f.2: reg 14: [io  0x305c-0x305f]
[    1.103320] pci 0000:00:1f.2: reg 18: [io  0x3040-0x3047]
[    1.103332] pci 0000:00:1f.2: reg 1c: [io  0x3058-0x305b]
[    1.103344] pci 0000:00:1f.2: reg 20: [io  0x3020-0x303f]
[    1.103354] pci 0000:00:1f.2: reg 24: [mem 0xb4405000-0xb44057ff]
[    1.103419] pci 0000:00:1f.2: PME# supported from D3hot
[    1.103446] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    1.103466] pci 0000:00:1f.3: reg 10: [mem 0xb4406000-0xb44060ff 64bit]
[    1.103494] pci 0000:00:1f.3: reg 20: [io  0x3000-0x301f]
[    1.103544] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    1.103570] pci 0000:00:1f.6: reg 10: [mem 0xb4404000-0xb4404fff 64bit]
[    1.103791] pci 0000:01:00.0: [14e4:1692] type 0 class 0x000200
[    1.103832] pci 0000:01:00.0: reg 10: [mem 0xb3400000-0xb340ffff 64bit]
[    1.104055] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    1.105335] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    1.105345] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.105354] pci 0000:00:1c.0:   bridge window [mem 0xb3400000-0xb43fffff]
[    1.105380] pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
[    1.105507] pci 0000:02:00.0: [14e4:4357] type 0 class 0x000280
[    1.105550] pci 0000:02:00.0: reg 10: [mem 0xb2400000-0xb2403fff 64bit]
[    1.105783] pci 0000:02:00.0: supports D1 D2
[    1.105785] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.107395] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    1.107400] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    1.107405] pci 0000:00:1c.1:   bridge window [mem 0xb2400000-0xb33fffff]
[    1.107412] pci 0000:00:1c.1:   bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
[    1.107483] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    1.107496] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.107498] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.107500] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.107502] pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode)
[    1.107523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.107825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.107933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.107975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.108085] \_SB_.PCI0:_OSC invalid UUID
[    1.108086] _OSC request data:1 1f 0 
[    1.108090]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.108132] \_SB_.PCI0:_OSC invalid UUID
[    1.108133] _OSC request data:1 0 1d 
[    1.108137]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.108138] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.114544] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    1.114589] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[    1.114607] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    1.114625] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    1.114641] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    1.114657] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    1.114673] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    1.114701]  pci0000:ff: Requesting ACPI _OSC control (0x1d)
[    1.114703]  pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    1.114705] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.114962] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.115015] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.115066] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.115118] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.115169] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.115220] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.115281] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.115338] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.115445] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.115456] vgaarb: loaded
[    1.115457] vgaarb: bridge control possible 0000:00:02.0
[    1.115500] PCI: Using ACPI for IRQ routing
[    1.125386] PCI: pci_cache_line_size set to 64 bytes
[    1.125553] reserve RAM buffer: 000000000009d000 - 000000000009ffff 
[    1.125555] reserve RAM buffer: 0000000093681000 - 0000000093ffffff 
[    1.125557] reserve RAM buffer: 0000000093736000 - 0000000093ffffff 
[    1.125559] reserve RAM buffer: 00000000937de000 - 0000000093ffffff 
[    1.125561] reserve RAM buffer: 0000000093800000 - 0000000093ffffff 
[    1.125684] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.125689] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.127716] Switching to clocksource hpet
[    1.130026] pnp: PnP ACPI init
[    1.130043] ACPI: bus type pnp registered
[    1.130422] pnp 00:00: [bus 00-fe]
[    1.130426] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.130428] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.130429] pnp 00:00: [io  0x0d00-0xffff window]
[    1.130431] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.130433] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.130435] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.130437] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.130439] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.130440] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.130442] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.130444] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.130446] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.130448] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.130449] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.130451] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.130453] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.130455] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.130457] pnp 00:00: [mem 0xa0000000-0xfebfffff window]
[    1.130459] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.130520] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.329465] pnp 00:01: [io  0x0000-0x001f]
[    1.329470] pnp 00:01: [io  0x0081-0x0091]
[    1.329474] pnp 00:01: [io  0x0093-0x009f]
[    1.329477] pnp 00:01: [io  0x00c0-0x00df]
[    1.329482] pnp 00:01: [dma 4]
[    1.329519] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.329528] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.329554] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.329650] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.329677] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.329687] pnp 00:04: [io  0x00f0]
[    1.329698] pnp 00:04: [irq 13]
[    1.329727] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.329739] pnp 00:05: [io  0x002e-0x002f]
[    1.329740] pnp 00:05: [io  0x004e-0x004f]
[    1.329743] pnp 00:05: [io  0x0061]
[    1.329744] pnp 00:05: [io  0x0063]
[    1.329746] pnp 00:05: [io  0x0065]
[    1.329747] pnp 00:05: [io  0x0067]
[    1.329749] pnp 00:05: [io  0x0068]
[    1.329750] pnp 00:05: [io  0x006c]
[    1.329752] pnp 00:05: [io  0x0070]
[    1.329753] pnp 00:05: [io  0x0080]
[    1.329754] pnp 00:05: [io  0x0092]
[    1.329756] pnp 00:05: [io  0x00b2-0x00b3]
[    1.329757] pnp 00:05: [io  0x0680-0x069f]
[    1.329759] pnp 00:05: [io  0xff2c-0xff2f]
[    1.329761] pnp 00:05: [io  0x0800-0x080f]
[    1.329762] pnp 00:05: [io  0xffff]
[    1.329763] pnp 00:05: [io  0xffff]
[    1.329765] pnp 00:05: [io  0x0400-0x047f]
[    1.329766] pnp 00:05: [io  0x0500-0x057f]
[    1.329768] pnp 00:05: [io  0x164e-0x164f]
[    1.329781] pnp 00:05: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io  0x1000-0x1fff]
[    1.329826] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.329828] system 00:05: [io  0xff2c-0xff2f] has been reserved
[    1.329831] system 00:05: [io  0x0800-0x080f] has been reserved
[    1.329833] system 00:05: [io  0xffff] has been reserved
[    1.329835] system 00:05: [io  0xffff] has been reserved
[    1.329838] system 00:05: [io  0x0400-0x047f] has been reserved
[    1.329840] system 00:05: [io  0x0500-0x057f] has been reserved
[    1.329843] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.329852] pnp 00:06: [io  0x0070-0x0077]
[    1.329857] pnp 00:06: [irq 8]
[    1.329885] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.329909] pnp 00:07: [io  0x0060]
[    1.329910] pnp 00:07: [io  0x0064]
[    1.329916] pnp 00:07: [irq 1]
[    1.329943] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.329976] pnp 00:08: [irq 12]
[    1.330007] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.330357] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    1.330359] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[    1.330361] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    1.330363] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    1.330365] pnp 00:09: [mem 0xe0000000-0xefffffff]
[    1.330368] pnp 00:09: [mem 0xb4500000-0xb4500fff]
[    1.330370] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    1.330372] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[    1.330373] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[    1.330375] pnp 00:09: [mem 0xff000000-0xffffffff]
[    1.330377] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    1.330439] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.330441] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.330444] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.330446] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.330449] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    1.330452] system 00:09: [mem 0xb4500000-0xb4500fff] has been reserved
[    1.330454] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.330456] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.330459] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.330461] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    1.330464] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.330467] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.330592] pnp 00:0a: [bus ff]
[    1.330633] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.330646] pnp: PnP ACPI: found 11 devices
[    1.330647] ACPI: ACPI bus type pnp unregistered
[    1.338636] PCI: max bus depth: 1 pci_try_num: 2
[    1.338667] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    1.338671] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.338677] pci 0000:00:1c.0:   bridge window [mem 0xb3400000-0xb43fffff]
[    1.338681] pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
[    1.338689] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    1.338692] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    1.338698] pci 0000:00:1c.1:   bridge window [mem 0xb2400000-0xb33fffff]
[    1.338702] pci 0000:00:1c.1:   bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
[    1.338710] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    1.338743] pci 0000:00:1c.0: setting latency timer to 64
[    1.338759] pci 0000:00:1c.1: setting latency timer to 64
[    1.338767] pci 0000:00:1e.0: setting latency timer to 64
[    1.338771] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.338773] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.338775] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.338777] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfebfffff]
[    1.338778] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.338780] pci_bus 0000:01: resource 1 [mem 0xb3400000-0xb43fffff]
[    1.338782] pci_bus 0000:01: resource 2 [mem 0xb0400000-0xb13fffff 64bit pref]
[    1.338784] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    1.338785] pci_bus 0000:02: resource 1 [mem 0xb2400000-0xb33fffff]
[    1.338787] pci_bus 0000:02: resource 2 [mem 0xb1400000-0xb23fffff 64bit pref]
[    1.338789] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    1.338791] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    1.338792] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    1.338794] pci_bus 0000:03: resource 7 [mem 0xa0000000-0xfebfffff]
[    1.338835] NET: Registered protocol family 2
[    1.338956] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.339817] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.341638] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[    1.342437] TCP: Hash tables configured (established 524288 bind 65536)
[    1.342440] TCP reno registered
[    1.342474] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[    1.342549] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[    1.342720] NET: Registered protocol family 1
[    1.342740] pci 0000:00:02.0: Boot video device
[    1.364413] PCI: CLS 64 bytes, default 64
[    1.364469] Unpacking initramfs...
[    1.581426] Freeing initrd memory: 14084k freed
[    1.584686] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.584691] Placing 64MB software IO TLB between ffff88008f681000 - ffff880093681000
[    1.584693] software IO TLB at phys 0x8f681000 - 0x93681000
[    1.584743] Simple Boot Flag at 0x44 set to 0x1
[    1.585320] audit: initializing netlink socket (disabled)
[    1.585334] type=2000 audit(1411315950.266:1): initialized
[    1.596459] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.596698] VFS: Disk quotas dquot_6.5.2
[    1.596726] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.596795] msgmni has been set to 7273
[    1.596983] alg: No test for stdrng (krng)
[    1.597014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.597017] io scheduler noop registered
[    1.597018] io scheduler deadline registered
[    1.597028] io scheduler cfq registered (default)
[    1.597243] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.597262] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.597264] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.597752] intel_idle: MWAIT substates: 0x1120
[    1.597753] intel_idle: v0.4 model 0x25
[    1.597755] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.597800] ERST: Table is not found!
[    1.597801] GHES: HEST is not enabled!
[    1.597864] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.665883] Linux agpgart interface v0.103
[    1.665970] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    1.666066] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.666823] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[    1.666989] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000
[    1.667123] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.683088] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.683130] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.683259] mousedev: PS/2 mouse device common for all mice
[    1.683578] rtc_cmos 00:06: RTC can wake from S4
[    1.683707] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.683776] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.683851] cpuidle: using governor ladder
[    1.683939] cpuidle: using governor menu
[    1.684148] TCP cubic registered
[    1.684179] NET: Registered protocol family 10
[    1.684681] Mobile IPv6
[    1.684683] NET: Registered protocol family 17
[    1.684687] Registering the dns_resolver key type
[    1.684854] PM: Hibernation image not present or could not be loaded.
[    1.684870] registered taskstats version 1
[    1.685369] rtc_cmos 00:06: setting system clock to 2014-09-21 16:12:31 UTC (1411315951)
[    1.685426] Initializing network drop monitor service
[    1.685992] Freeing unused kernel memory: 912k freed
[    1.699925] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.701693] udevd[60]: starting version 175
[    1.724865] usbcore: registered new interface driver usbfs
[    1.724889] usbcore: registered new interface driver hub
[    1.724951] usbcore: registered new device driver usb
[    1.725301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.725382] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.725386] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.725413] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.725451] ehci_hcd 0000:00:1a.0: debug port 2
[    1.729389] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.729443] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb4405c00
[    1.739377] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.739669] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.739673] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.739676] usb usb1: Product: EHCI Host Controller
[    1.739678] usb usb1: Manufacturer: Linux 3.2.0-4-realtime-amd64 ehci_hcd
[    1.739680] usb usb1: SerialNumber: 0000:00:1a.0
[    1.752459] SCSI subsystem initialized
[    1.752902] tg3.c:v3.121 (November 2, 2011)
[    1.752971] tg3 0000:01:00.0: setting latency timer to 64
[    1.753379] hub 1-0:1.0: USB hub found
[    1.753389] hub 1-0:1.0: 2 ports detected
[    1.755394] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.755399] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.755468] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.755502] ehci_hcd 0000:00:1d.0: debug port 2
[    1.759436] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.759501] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xb4405800
[    1.765522] libata version 3.00 loaded.
[    1.769272] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.769367] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.769371] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.769374] usb usb2: Product: EHCI Host Controller
[    1.769377] usb usb2: Manufacturer: Linux 3.2.0-4-realtime-amd64 ehci_hcd
[    1.769379] usb usb2: SerialNumber: 0000:00:1d.0
[    1.771387] hub 2-0:1.0: USB hub found
[    1.771396] hub 2-0:1.0: 2 ports detected
[    1.772146] ahci 0000:00:1f.2: version 3.0
[    1.772278] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.772289] tg3 mdio bus: probed
[    1.772353] ahci: SSS flag set, parallel bus scan disabled
[    1.772425] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.772428] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    1.772433] ahci 0000:00:1f.2: setting latency timer to 64
[    1.788237] tg3 0000:01:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 88:ae:1d:8f:f6:c3
[    1.788242] tg3 0000:01:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=100:01)
[    1.788244] tg3 0000:01:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.788247] tg3 0000:01:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.797781] scsi0 : ahci
[    1.801631] scsi1 : ahci
[    1.805819] scsi2 : ahci
[    1.808227] scsi3 : ahci
[    1.810068] ata1: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405100 irq 40
[    1.810073] ata2: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405180 irq 40
[    1.810074] ata3: DUMMY
[    1.810076] ata4: DUMMY
[    2.055686] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.113579] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.118650] ata1.00: ATA-8: SanDisk SDSSDHP128G, X2316RL, max UDMA/133
[    2.118656] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.120242] ata1.00: configured for UDMA/133
[    2.120492] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDHP1 X231 PQ: 0 ANSI: 5
[    2.170237] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    2.170263] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.170704] hub 1-1:1.0: USB hub found
[    2.170870] hub 1-1:1.0: 6 ports detected
[    2.273049] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.387680] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.387687] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.388352] hub 2-1:1.0: USB hub found
[    2.388518] hub 2-1:1.0: 8 ports detected
[    2.424823] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.427021] ata2.00: ATA-8: WDC WD3200BPVT-22ZEST0, 01.01A01, max UDMA/133
[    2.427027] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.428542] ata2.00: configured for UDMA/133
[    2.428726] scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
[    2.442420] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.442471] sd 0:0:0:0: [sda] Write Protect is off
[    2.442473] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.442488] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.442872] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.442874] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    2.442926] sd 1:0:0:0: [sdb] Write Protect is off
[    2.442929] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.442957] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.446854]  sda: sda1 sda2
[    2.447273] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.450583] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.450855] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.462786] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[    2.582728] usb 1-1.1: New USB device found, idVendor=064e, idProduct=a219
[    2.582734] usb 1-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.582739] usb 1-1.1: Product: 1.3M WebCam
[    2.582742] usb 1-1.1: Manufacturer: Suyin
[    2.582746] usb 1-1.1: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
[    2.583228] Refined TSC clocksource calibration: 2659.999 MHz.
[    2.583231] Switching to clocksource tsc
[    2.660318] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[    2.749388] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0138
[    2.749395] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.749399] usb 1-1.2: Product: USB2.0-CRW
[    2.749403] usb 1-1.2: Manufacturer: Generic
[    2.749406] usb 1-1.2: SerialNumber: 20090516388200000
[    2.759648] Initializing USB Mass Storage driver...
[    2.759757] usbcore: registered new interface driver usb-storage
[    2.759767] USB Mass Storage support registered.
[    2.828916] usb 2-1.1: new full-speed USB device number 3 using ehci_hcd
[    2.907942] usb 2-1.1: New USB device found, idVendor=1d03, idProduct=0051
[    2.907948] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.907953] usb 2-1.1: Product: iCON G_Boar V1.01
[    2.907956] usb 2-1.1: Manufacturer: iCON
[    2.907960] usb 2-1.1: SerialNumber: 09101
[    2.982569] usb 2-1.3: new full-speed USB device number 4 using ehci_hcd
[    3.847082]  sdb: sdb1 sdb2 < sdb5 > sdb3
[    3.848571] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.867709] scsi4 : usb-storage 1-1.2:1.0
[    3.867803] usbcore: registered new interface driver ums-realtek
[    4.387439] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[    4.389209] platform microcode: firmware: agent loaded intel-ucode/06-25-05 into memory
[    4.389411] microcode: CPU0 updated to revision 0x4, date = 2013-06-28
[    4.389422] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[    4.392732] platform microcode: firmware: agent loaded intel-ucode/06-25-05 into memory
[    4.393091] microcode: CPU1 updated to revision 0x4, date = 2013-06-28
[    4.393102] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[    4.394980] platform microcode: firmware: agent loaded intel-ucode/06-25-05 into memory
[    4.395356] microcode: CPU2 updated to revision 0x4, date = 2013-06-28
[    4.395365] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[    4.398944] platform microcode: firmware: agent loaded intel-ucode/06-25-05 into memory
[    4.399330] microcode: CPU3 updated to revision 0x4, date = 2013-06-28
[    4.399403] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.429426] PM: Starting manual resume from disk
[    4.429429] PM: Hibernation image partition 8:21 present
[    4.429431] PM: Looking for hibernation image.
[    4.429710] PM: Image not found (code -22)
[    4.429714] PM: Hibernation image not present or could not be loaded.
[    4.452150] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.723096] udevd[395]: starting version 175
[    4.794214] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input1
[    4.794222] ACPI: Power Button [PWRB]
[    4.794305] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input2
[    4.794391] ACPI: Lid Switch [LID0]
[    4.794458] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input3
[    4.794462] ACPI: Sleep Button [SLPB]
[    4.794548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    4.794552] ACPI: Power Button [PWRF]
[    4.797825] ACPI: Requesting acpi_cpufreq
[    4.826218] iTCO_vendor_support: vendor-support=0
[    4.828270] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    4.828356] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[    4.828535] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    4.829030] ACPI: resource 0000:00:1f.3 [io  0x3000-0x301f] conflicts with ACPI region SMBI [io 0x3000-0x300f]
[    4.829033] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.835614] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    4.840831] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[    4.842258] [drm] Initialized drm 1.1.0 20060810
[    4.842672] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.859270] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    4.859888] cfg80211: Calling CRDA to update world regulatory domain
[    4.876254] i915 0000:00:02.0: setting latency timer to 64
[    4.894062] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 11
[    4.894128] brcmsmac 0000:02:00.0: setting latency timer to 64
[    4.925804] mtrr: no more MTRRs available
[    4.925808] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    4.941512] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    4.941518] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.941520] [drm] Driver supports precise vblank timestamp query.
[    4.941686] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.946964] wmi: Mapper loaded
[    5.017041] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    5.140141] Linux media interface: v0.10
[    5.144977] cfg80211: World regulatory domain updated:
[    5.144980] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    5.144982] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.144984] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.144986] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.144988] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.144990] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.155635] brcmsmac 0000:02:00.0: firmware: agent loaded brcm/bcm43xx-0.fw into memory
[    5.178137] acer_wmi: Acer Laptop ACPI-WMI Extras
[    5.178187] acer_wmi: Function bitmap for Communication Button: 0x1
[    5.178351] acer_wmi: Brightness must be controlled by generic video driver
[    5.181193] input: Acer WMI hotkeys as /devices/virtual/input/input6
[    5.196002] brcmsmac 0000:02:00.0: firmware: agent loaded brcm/bcm43xx_hdr-0.fw into memory
[    5.373046] fbcon: inteldrmfb (fb0) is primary device
[    5.584478] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x040213)
[    5.649495] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x18, 0x0c.
[    5.694514] Console: switching to colour frame buffer device 170x48
[    5.701887] fb0: inteldrmfb frame buffer device
[    5.701888] drm: registered panic notifier
[    5.931980] ACPI: AC Adapter [AC] (on-line)
[    5.965818] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[    6.004969] acpi device:03: registered as cooling_device4
[    6.005568] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    6.005798] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    6.005915] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.474638] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[    7.174792] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[    7.434348] ACPI: Battery Slot [BAT0] (battery present)
[    7.437533] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.441486] cfg80211: Calling CRDA for country: US
[    7.445920] Linux video capture interface: v2.00
[    7.449226] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[    7.450454] usbcore: registered new interface driver snd-usb-audio
[    7.450847] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    7.450923] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    7.459316] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8
[    7.459463] usbcore: registered new interface driver uvcvideo
[    7.459467] USB Video Class driver (1.1.1)
[    7.473418] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[    7.482376] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0
[    7.482637] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.483172] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    7.483307] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.791447] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input13
[    7.960131] cfg80211: Regulatory domain changed to country: US
[    7.960137] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    7.960142] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.960148] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    7.960152] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.960157] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.960161] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.960166] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   10.015734] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[   18.017812] usb 2-1.3: device descriptor read/64, error -110
[   19.392034] hub 2-1:1.0: unable to enumerate USB device on port 3
[   19.497412] usb 1-1.2: USB disconnect, device number 4
[   19.816132] Adding 6957052k swap on /dev/sdb5.  Priority:-1 extents:1 across:6957052k 
[   19.839443] EXT4-fs (sda2): re-mounted. Opts: (null)
[   20.417928] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   20.482732] loop: module loaded
[   21.646069] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[   22.115473] usb 2-1.3: new full-speed USB device number 5 using ehci_hcd
[   22.137672] hub 2-1:1.0: unable to enumerate USB device on port 3
[   22.372826] usb 2-1.3: new full-speed USB device number 6 using ehci_hcd
[   22.469610] usb 2-1.3: config 1 has an invalid interface number: 4 but max is 3
[   22.469616] usb 2-1.3: config 1 has no interface number 3
[   22.472954] usb 2-1.3: New USB device found, idVendor=1210, idProduct=000a
[   22.472962] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   22.472966] usb 2-1.3: Product: Lexicon Alpha
[   22.472970] usb 2-1.3: Manufacturer: Lexicon
[   22.483180] 6:1:1: cannot get freq at ep 0x1
[   22.486163] 6:1:2: cannot get freq at ep 0x1
[   22.489791] 6:2:1: cannot get freq at ep 0x82
[   22.492777] 6:2:2: cannot get freq at ep 0x82
[   22.684613] Bluetooth: Core ver 2.16
[   22.684635] NET: Registered protocol family 31
[   22.684637] Bluetooth: HCI device and connection manager initialized
[   22.684640] Bluetooth: HCI socket layer initialized
[   22.684641] Bluetooth: L2CAP socket layer initialized
[   22.684649] Bluetooth: SCO socket layer initialized
[   22.690847] Bluetooth: RFCOMM TTY layer initialized
[   22.690854] Bluetooth: RFCOMM socket layer initialized
[   22.690856] Bluetooth: RFCOMM ver 1.11
[   22.692793] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.692843] Bluetooth: BNEP filters: protocol multicast
[   22.733107] lp: driver loaded but no devices found
[   22.736831] ppdev: user-space parallel port driver
[   22.773340] tg3 0000:01:00.0: irq 43 for MSI/MSI-X
[   22.799177] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.820602] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[   22.820606] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[   22.822169] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   22.822630] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.509010] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[   23.769257] tg3 0000:01:00.0: eth0: Link is down
[   35.324824] fuse init (API version 7.17)
[   44.635294] wlan0: authenticate with 00:1f:9f:ee:28:c5 (try 1)
[   44.636885] wlan0: authenticated
[   44.640824] wlan0: associate with 00:1f:9f:ee:28:c5 (try 1)
[   44.644218] wlan0: RX AssocResp from 00:1f:9f:ee:28:c5 (capab=0x411 status=0 aid=7)
[   44.644225] wlan0: associated
[   44.645011] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   44.645015] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[   44.645018] ieee80211 phy0: changing basic rates failed: -22
[   44.645020] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   44.645273] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.501504] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[   55.129604] wlan0: no IPv6 routers present
[   66.424804] 6:2:2: cannot get freq at ep 0x82
[   66.429782] 6:1:2: cannot get freq at ep 0x1
[  115.801084] retire_capture_urb: 2574 callbacks suppressed
[  120.814516] retire_capture_urb: 2565 callbacks suppressed
[  125.806068] retire_capture_urb: 2577 callbacks suppressed
[  130.798535] retire_capture_urb: 2566 callbacks suppressed
[  135.789983] retire_capture_urb: 2575 callbacks suppressed
[  140.796459] retire_capture_urb: 2556 callbacks suppressed
[  145.787874] retire_capture_urb: 2575 callbacks suppressed
[  150.780411] retire_capture_urb: 2568 callbacks suppressed
[  155.771866] retire_capture_urb: 2577 callbacks suppressed
[  160.781353] retire_capture_urb: 2562 callbacks suppressed
[  165.772899] retire_capture_urb: 2576 callbacks suppressed


voilà
haut de page

Envoyé par utilisateur_anonyme le dim. 21 Sep 2014 16:56
Essais voir en installant alsa-firmware depot non-free ts
haut de page

ldu Envoyé par ldu le dim. 21 Sep 2014 18:10 utilisateur non connecté
J'ai installé alsa-firmware, toujours même pbs.
Y avait-il autochose à faire?
haut de page

olinuxx Envoyé par olinuxx le dim. 21 Sep 2014 18:27 utilisateur non connecté France
file nous un résultat de lsusb et un cat /proc/asound/cards avec les 2 branchés mais avant que ca ne plante.
haut de page

ldu Envoyé par ldu le dim. 21 Sep 2014 18:51 utilisateur non connecté
lsusb:
laurent@ldu-pc:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 064e:a219 Suyin Corp. 1.3M WebCam (notebook emachines E730, Acer sub-brand)
Bus 002 Device 010: ID 1210:000a DigiTech 
Bus 002 Device 003: ID 1d03:0051 iCON 
Bus 002 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse

cat /proc/asound/cards
laurent@ldu-pc:~$ cat /proc/asound/cards
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xb4400000 irq 42
 1 [V101           ]: USB-Audio - iCON G_Boar V1.01
                      iCON iCON G_Boar V1.01 at usb-0000:00:1d.0-1.1, full speed
 2 [Loopback       ]: Loopback - Loopback
                      Loopback 1
 3 [Alpha          ]: USB-Audio - Lexicon Alpha
                      Lexicon Lexicon Alpha at usb-0000:00:1d.0-1.3, full speed


Une question que je me pose, dans JACK, j'ai dans la liste des périphériques audio j'ai mon "icon Gboard" alors que ce n'est pas une carte son.
haut de page

Envoyé par utilisateur_anonyme le lun. 22 Sep 2014 01:17
Citation :
C'est vraiment quand j'envoie un signal sur cette carte avec le pédalier connecté que ça plante.


Citation :
Une question que je me pose, dans JACK, j'ai dans la liste des périphériques audio j'ai mon "icon Gboard" alors que ce n'est pas une carte son.


D'accord je suis trop c@n moi je n'ai pas regardé ce que c'était comme matos moi je pensais qu'il avait une entrée audio c'est dire.oups
Donc moi ce que j'essairai c'est d voir si le pedalier tout seul est capable d'émettre des signaux midi ou non. Si tout seul il fonctionne alors je chercherai ailleurs:
Est ce que par hasard tu ne serait pas sur un laptop ? Vu la ref du pc tu va surement me dire oui donc ce que tu fait: Avant de lancer jack tu ajoute à un de tes panel via un clic droit "Monitoeur de changement de fréquence du processeur" et systématiquement quand tu veux faire du son tu le passe sur performance governor et je pense bien que ça devrait arrêter tes xruns (si c'est bien ce que je pense)
On peux définir par défaut le réglage sur performance mais c'est au détriment de la batterie ...
haut de page

ldu Envoyé par ldu le mar. 23 Sep 2014 09:01 utilisateur non connecté
Oui, je suis bien sur un labtop, mais sur secteur (la batterie ne risque rien, elle ne tient plus la charge).

je test ce soir chez moi.

Merci!
haut de page

Page : 1/2  [Suivant]
1  2 
Afficher les articles :
Aller au forum :

Documentation [Afficher / Cacher]

Faire un don
 [Afficher / Cacher]

Connexion
 [Afficher / Cacher]


Mégaphone [Afficher / Cacher]

allany, 10:35, lun. 12 mai 2025: Et pour la totale, l'éditorial ! [Lien]
olinuxx, 12:25, jeu. 08 mai 2025: [ANNONCE] Le live de LibraZiK-4 est de retour ! [Lien]
calixtus06, 08:02, lun. 05 mai 2025: Bonjour et bienvenue à jipe35 et Bachila :-)
calixtus06, 14:59, lun. 28 Apr 2025: Bonjour et bienvenue à jpl :-)
calixtus06, 12:57, mar. 22 Apr 2025: Bonjour et bienvenue à Ardii,sgio et Gilles13 :-)
allany, 08:30, sam. 12 Apr 2025: Celui-ci, d'éditoriel, il est bien réel ! [Lien]
calixtus06, 16:39, lun. 07 Apr 2025: Bonjour et bienvenue à Saanvis754 :-)
calixtus06, 08:37, lun. 07 Apr 2025: Bonjour et bienvenue à skamoss et à lecapitainecoeur :-)
allany, 17:27, mar. 01 Apr 2025: Il est sensationnel cet éditoriel ! [Lien]
calixtus06, 13:04, dim. 30 mars 2025: Bonjour et bienvenue à MarM et gor :-)
olinuxx, 15:45, mer. 26 mars 2025: [ANNONCE] LibraZiK a fini de déménager depuis TuxFamily vers Ouvaton : [Lien] . Grand merci à toutes ces personnes qui ont aidé !
calixtus06, 10:29, lun. 24 mars 2025: Bonjour et bienvenue à adhooge :-)