Forum : 5 - Les serveurs son : JACK, PulseAudio et autres...

Jack

dinnisisis utilisateur non connecté
Bonjour, veuillez m'excusez mais je débute avec linux .... donc je nage un peu (beaucoup) !
Mon problème j'ai installé Qjackctl il fonctionne au départ puis je décide de cocher l'option
REALTIME et depuis ne se lance plus voici le message :


11:42:49.194 Patchbay deactivated.
11:42:49.327 Statistics reset.
11:42:49.406 MIDI connection graph change.
11:42:49.580 MIDI connection change.
11:42:50.058 Startup script...
11:42:50.058 artsshell -q terminate
sh: artsshell: not found
11:42:50.261 Startup script terminated with exit status=32512.
11:42:50.261 JACK is starting...
11:42:50.261 /usr/bin/jackd -dalsa -ddefault -r44100 -p1024 -n2
11:42:50.277 JACK was started with PID=15727 (0x3d6f).
jackd 0.102.20
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
apparent rate = 44100
creating alsa driver ... default|default|1024|2|44100|0|0|nomon|swmeter|-|32bit
configuring for 44100Hz, period = 1024 frames, buffer = 2 periods
ALSA: final selected sample format for capture: 32bit little-endian
You appear to be using the ALSA software "plug" layer, probably
a result of using the "default" ALSA device. This is less
efficient than it could be. Consider using a hardware device
instead rather than using the plug layer. Usually the name of the
hardware device that corresponds to the first soun
ALSA: cannot set period size to 1024 frames for capture
ALSA: cannot configure capture channel
cannot load driver module alsa
no message buffer overruns
11:42:50.525 JACK was stopped successfully.
11:42:50.525 Post-shutdown script...
11:42:50.525 killall jackd
jackd: aucun processus tué
11:42:50.755 Post-shutdown script terminated with exit status=256.
11:42:52.426 Could not connect to JACK server as client. Please check the messages window for more info.


Voilà, je suis bloqué ! Merci d'avance pour vos réponses.

Norrin_Radd utilisateur non connecté France
Le message d'erreur en question n'a pas l'air d'être en relation avec le mode RT (tu peux à tout hasard décocher l'option Realtime dans SETUP), mais avec ta carte son n'acceptant pas les paramètres. Les logs suggèrent d'utiliser hw:0 plutôt que default (SETUP/Interface).

dinnisisis utilisateur non connecté
Ce que je ne comprends pas c'est que je coche cette option ou que je l a décoche , ça ne fonctionne pas de toute façon, alors que j'ai essayer Studio64 sur le même poste et la pas de blème !!!?

Merci de vos réponses, Dinnis.