Chargement...
 
[Voir/Cacher menus de gauche]
[Voir/Cacher menus de droite]

1 - Le matériel et les pilotes ALSA, FFADO, ...

Dernier post
Page : 1/2   -   Aller directement à la page : 1  2 

Problème firewire

Dan.p utilisateur non connecté
Bonjour toutes et tous,

Je suis sous kubuntu 20.04 avec les dépots kxstudio. J'ai installé tous les paquets proposés par kxstudio.
Carte son Saffire pro 26. Carte firewire pcie chipset Ti Xio2213.

La carte son est bien vu par FFADO, lorsque je lance jack via cadence la connexion se fait bien avec la carte son mais quelques secondes après la carte se déconnecte, FFADO ne la trouve plus et je ne peux plus rien faire avec cadence.
Nouveau dans l'univers linuxien je suis un peu perdu. Merci pour votre aide.
Dan

minimoineau utilisateur non connecté
Salut Dan,

Peux-tu nous montrer ta fenêtre de configuration de Jack (Jack Settings) dans Cadence?
Utilises-tu FFADOmixer sans problème?

Dan.p utilisateur non connecté
Bonjour Minimoineau,

Voici donc la configuration dans cadence :

Image

En cherchant sur le net j'ai vu l'utilisation de la commande "lspci". Si j'ai bien compris elle permet de lister ce qui est connecté sur les ports pci et pcie. Je mets une capture au cas où ça puisse aider :

Image

Toujours si je comprends bien la carte est bien reconnue.Ce qui m'intrigue c'est qu'il est marqué IEEE-1394B alors qu'il y a aussi une connection 1394a.

Autre info, FFADO lancé dans une console me retourne ceci :

Image

Voilà ou j'en suis.

Dan.p utilisateur non connecté
Re,

Je viens de constater ceci :

Lorsque je désactive le lancement automatique au démarrage de jack dans cadence et que je lance Ffado-mixer la communication se fait avec la carte son. Dès que je lance jack la communication se coupe et j'ai ceci dans le terminal :
Image

minimoineau utilisateur non connecté
Salut Dan,
Alors normalement, l'ordre logique avec les cartes Firewire c'est de lancer FFADOmixer en premier, puis Jack.

Mais on avance. Tu as bien fait de désactiver le lancement automatique de Jack, on y verra plus clair.

Essaye de démarrer Jack avec le pilote Alsa sur ta carte firewire car il est possible qu'elle soit prise en charge directement, et sans passer par FFADOmixer (si c'est le cas, elle sera présente dans le menu "Device/Interface" de l'onglet "Driver" en sélectionnant Alsa comme pilote).

Dan.p utilisateur non connecté
Merci pour le suivi Minimoineau,

J'ai donc choisi Alsa comme pilote. dans le menu "Device/Interface" trois possibilité :

- hw:Generic,0 ALC892 Analog
- hw:Generic,0 ALC892 Digital
- hw:0

J'ai sélectionné hw:0, lancé jack qui démarre mais aucune communication avec la carte.

minimoineau utilisateur non connecté
OK, lorsque tu dis
Citation :
jack qui démarre mais aucune communication avec la carte.

peux-tu être plus précis?
Lorsque Jack est lancé :
  • qu'as-tu comme connexions par exemple si tu lances Catia?
  • que te renvoie les logs de Jack? (tout ça se trouve dans l'onglet "tools" de Cadence).

Dan.p utilisateur non connecté
Quand la carte est activé, deux leds s'allument, une marquée "fw" l'autre "lkd". Or elles restent éteintes et si je lance hydrogène par exemple, aucun son en sortie.

Connexions Catia :

Image

Logs de Jack :

Image

minimoineau utilisateur non connecté
Bon, il me semble que Jack ne démarre pas sur ta carte Firewire qui possède plus d'entrées/sorties que ça!

Peux-tu tenter de démarrer Jack sur le pilote Firewire de nous montrer les logs?

Dan.p utilisateur non connecté
Voilà, c'est un peu long!

Sun Oct 18 15:17:57 2020: ------------------
Sun Oct 18 15:17:57 2020: Controller activated. Version 1.9.14 (0+) built on Mon Oct  5 15:02:14 2020
Sun Oct 18 15:17:57 2020: Loading settings from "/home/oliv/.config/jack/conf.xml" using expat_2.2.9 ...
Sun Oct 18 15:17:57 2020: ERROR: failed to stat "/home/oliv/.config/jack/conf.xml", error is 2 (No such file or directory)
Sun Oct 18 15:17:57 2020: ERROR: open() failed to open conf filename.
Sun Oct 18 15:17:57 2020: Listening for D-Bus messages
Sun Oct 18 15:17:57 2020: Controller deactivated.
Sun Oct 18 15:17:58 2020: ------------------
Sun Oct 18 15:17:58 2020: Controller activated. Version 1.9.14 (0+) built on Mon Oct  5 15:02:14 2020
Sun Oct 18 15:17:58 2020: Loading settings from "/home/oliv/.config/jack/conf.xml" using expat_2.2.9 ...
Sun Oct 18 15:17:58 2020: ERROR: failed to stat "/home/oliv/.config/jack/conf.xml", error is 2 (No such file or directory)
Sun Oct 18 15:17:58 2020: ERROR: open() failed to open conf filename.
Sun Oct 18 15:17:58 2020: Listening for D-Bus messages
Sun Oct 18 15:17:58 2020: Controller deactivated.
Sun Oct 18 15:17:59 2020: ------------------
Sun Oct 18 15:17:59 2020: Controller activated. Version 1.9.14 (0+) built on Mon Oct  5 15:02:14 2020
Sun Oct 18 15:17:59 2020: Loading settings from "/home/oliv/.config/jack/conf.xml" using expat_2.2.9 ...
Sun Oct 18 15:17:59 2020: ERROR: failed to stat "/home/oliv/.config/jack/conf.xml", error is 2 (No such file or directory)
Sun Oct 18 15:17:59 2020: ERROR: open() failed to open conf filename.
Sun Oct 18 15:17:59 2020: Listening for D-Bus messages
Sun Oct 18 15:17:59 2020: Starting jack server...
Sun Oct 18 15:17:59 2020: JACK server starting in realtime mode with priority 10
Sun Oct 18 15:17:59 2020: self-connect-mode is "Don't restrict self connect requests"
Sun Oct 18 15:17:59 2020: ERROR: Cannot lock down 107341338 byte memory area (Cannot allocate memory)
Sun Oct 18 15:17:59 2020: ERROR: Cannot use real-time scheduling (RR/10) (1: Operation not permitted)
Sun Oct 18 15:17:59 2020: ERROR: AcquireSelfRealTime error
Sun Oct 18 15:17:59 2020: graph reorder: new port 'system:capture_1'
Sun Oct 18 15:17:59 2020: New client 'system' with PID 0
Sun Oct 18 15:17:59 2020: graph reorder: new port 'system:capture_2'
Sun Oct 18 15:17:59 2020: graph reorder: new port 'system:playback_1'
Sun Oct 18 15:17:59 2020: graph reorder: new port 'system:playback_2'
Sun Oct 18 15:17:59 2020: New client 'a2j' with PID 1571
Sun Oct 18 15:17:59 2020: New client 'PulseAudio JACK Sink' with PID 1576
Sun Oct 18 15:17:59 2020: New client 'lsp' with PID 1621
Sun Oct 18 15:17:59 2020: Client 'lsp' with PID 1621 is out
Sun Oct 18 15:17:59 2020: Connecting 'PulseAudio JACK Sink:front-left' to 'system:playback_1'
Sun Oct 18 15:17:59 2020: Connecting 'PulseAudio JACK Sink:front-right' to 'system:playback_2'
Sun Oct 18 15:17:59 2020: New client 'PulseAudio JACK Source' with PID 1576
Sun Oct 18 15:17:59 2020: Connecting 'system:capture_1' to 'PulseAudio JACK Source:front-left'
Sun Oct 18 15:17:59 2020: Connecting 'system:capture_2' to 'PulseAudio JACK Source:front-right'
Sun Oct 18 15:17:59 2020: ------------------
Sun Oct 18 15:17:59 2020: Controller activated. Version 1.9.14 (0+) built on Mon Oct  5 15:02:14 2020
Sun Oct 18 15:17:59 2020: Loading settings from "/home/oliv/.config/jack/conf.xml" using expat_2.2.9 ...
Sun Oct 18 15:17:59 2020: ERROR: failed to stat "/home/oliv/.config/jack/conf.xml", error is 2 (No such file or directory)
Sun Oct 18 15:17:59 2020: ERROR: open() failed to open conf filename.
Sun Oct 18 15:17:59 2020: Listening for D-Bus messages
Sun Oct 18 15:17:59 2020: Starting jack server...
Sun Oct 18 15:17:59 2020: JACK server starting in realtime mode with priority 10
Sun Oct 18 15:17:59 2020: self-connect-mode is "Don't restrict self connect requests"
Sun Oct 18 15:17:59 2020: ERROR: Cannot lock down 107341338 byte memory area (Cannot allocate memory)
Sun Oct 18 15:17:59 2020: ERROR: Cannot use real-time scheduling (RR/10) (1: Operation not permitted)
Sun Oct 18 15:17:59 2020: ERROR: AcquireSelfRealTime error
Sun Oct 18 15:17:59 2020: graph reorder: new port 'system:capture_1'
Sun Oct 18 15:17:59 2020: New client 'system' with PID 0
Sun Oct 18 15:17:59 2020: graph reorder: new port 'system:capture_2'
Sun Oct 18 15:17:59 2020: graph reorder: new port 'system:playback_1'
Sun Oct 18 15:17:59 2020: graph reorder: new port 'system:playback_2'
Sun Oct 18 15:18:00 2020: New client 'PulseAudio JACK Sink' with PID 1649
Sun Oct 18 15:18:00 2020: Connecting 'PulseAudio JACK Sink:front-left' to 'system:playback_1'
Sun Oct 18 15:18:00 2020: Connecting 'PulseAudio JACK Sink:front-right' to 'system:playback_2'
Sun Oct 18 15:18:00 2020: New client 'PulseAudio JACK Source' with PID 1649
Sun Oct 18 15:18:00 2020: Connecting 'system:capture_1' to 'PulseAudio JACK Source:front-left'
Sun Oct 18 15:18:00 2020: Connecting 'system:capture_2' to 'PulseAudio JACK Source:front-right'
Sun Oct 18 15:18:00 2020: New client 'PulseAudio JACK Source-01' with PID 1649
Sun Oct 18 15:18:00 2020: Connecting 'system:capture_1' to 'PulseAudio JACK Source-01:front-left'
Sun Oct 18 15:18:00 2020: Connecting 'system:capture_2' to 'PulseAudio JACK Source-01:front-right'
Sun Oct 18 15:18:00 2020: New client 'a2j' with PID 1571
Sun Oct 18 15:18:00 2020: New client 'lsp' with PID 1725
Sun Oct 18 15:18:00 2020: Client 'lsp' with PID 1725 is out
Sun Oct 18 15:18:32 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:18:39 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:18:41 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:19:09 2020: Client 'a2j' with PID 1571 is out
Sun Oct 18 15:19:09 2020: Stopping jack server...
Sun Oct 18 15:19:09 2020: Client 'system' with PID 0 is out
Sun Oct 18 15:19:09 2020: Client 'PulseAudio JACK Sink' with PID 1649 is out
Sun Oct 18 15:19:09 2020: Client 'PulseAudio JACK Source' with PID 1649 is out
Sun Oct 18 15:19:09 2020: Client 'PulseAudio JACK Source-01' with PID 1649 is out
Sun Oct 18 15:19:09 2020: ERROR: Cannot write socket fd = 17 err = Broken pipe
Sun Oct 18 15:19:09 2020: ERROR: CheckRes error
Sun Oct 18 15:19:09 2020: ERROR: Could not write notification
Sun Oct 18 15:19:09 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:19:09 2020: ERROR: Cannot write socket fd = 20 err = Broken pipe
Sun Oct 18 15:19:09 2020: ERROR: CheckRes error
Sun Oct 18 15:19:09 2020: ERROR: Could not write notification
Sun Oct 18 15:19:09 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:19:09 2020: ERROR: Cannot write socket fd = 23 err = Broken pipe
Sun Oct 18 15:19:09 2020: ERROR: CheckRes error
Sun Oct 18 15:19:09 2020: ERROR: Could not write notification
Sun Oct 18 15:19:09 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:19:09 2020: ERROR: Cannot write socket fd = 17 err = Broken pipe
Sun Oct 18 15:19:09 2020: ERROR: CheckRes error
Sun Oct 18 15:19:09 2020: ERROR: Could not write notification
Sun Oct 18 15:19:09 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:19:09 2020: ERROR: Cannot write socket fd = 20 err = Broken pipe
Sun Oct 18 15:19:09 2020: ERROR: CheckRes error
Sun Oct 18 15:19:09 2020: ERROR: Could not write notification
Sun Oct 18 15:19:09 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:19:09 2020: ERROR: Cannot write socket fd = 23 err = Broken pipe
Sun Oct 18 15:19:09 2020: ERROR: CheckRes error
Sun Oct 18 15:19:09 2020: ERROR: Could not write notification
Sun Oct 18 15:19:09 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:19:14 2020: Starting jack server...
Sun Oct 18 15:19:14 2020: JACK server starting in realtime mode with priority 10
Sun Oct 18 15:19:14 2020: self-connect-mode is "Don't restrict self connect requests"
Sun Oct 18 15:19:14 2020: ERROR: Cannot lock down 107341338 byte memory area (Cannot allocate memory)
Sun Oct 18 15:19:14 2020: ERROR: Cannot use real-time scheduling (RR/10) (1: Operation not permitted)
Sun Oct 18 15:19:14 2020: ERROR: AcquireSelfRealTime error
Sun Oct 18 15:19:14 2020: graph reorder: new port 'system:capture_1'
Sun Oct 18 15:19:14 2020: New client 'system' with PID 0
Sun Oct 18 15:19:14 2020: graph reorder: new port 'system:capture_2'
Sun Oct 18 15:19:14 2020: graph reorder: new port 'system:playback_1'
Sun Oct 18 15:19:14 2020: graph reorder: new port 'system:playback_2'
Sun Oct 18 15:19:15 2020: New client 'PulseAudio JACK Sink' with PID 1649
Sun Oct 18 15:19:15 2020: New client 'a2j' with PID 1571
Sun Oct 18 15:19:15 2020: Connecting 'PulseAudio JACK Sink:front-left' to 'system:playback_1'
Sun Oct 18 15:19:15 2020: Connecting 'PulseAudio JACK Sink:front-right' to 'system:playback_2'
Sun Oct 18 15:19:15 2020: New client 'PulseAudio JACK Source' with PID 1649
Sun Oct 18 15:19:15 2020: ERROR: JackEngine::XRun: client = PulseAudio JACK Source was not finished, state = Triggered
Sun Oct 18 15:19:15 2020: ERROR: JackAudioDriver::ProcessGraphAsyncMaster: Process error
Sun Oct 18 15:19:15 2020: Connecting 'system:capture_1' to 'PulseAudio JACK Source:front-left'
Sun Oct 18 15:19:15 2020: Connecting 'system:capture_2' to 'PulseAudio JACK Source:front-right'
Sun Oct 18 15:19:19 2020: New client 'catia' with PID 1927
Sun Oct 18 15:19:35 2020: Client 'catia' with PID 1927 is out
Sun Oct 18 15:19:41 2020: Client 'a2j' with PID 1571 is out
Sun Oct 18 15:19:41 2020: Stopping jack server...
Sun Oct 18 15:19:41 2020: Client 'system' with PID 0 is out
Sun Oct 18 15:19:41 2020: Client 'PulseAudio JACK Sink' with PID 1649 is out
Sun Oct 18 15:19:41 2020: Client 'PulseAudio JACK Source' with PID 1649 is out
Sun Oct 18 15:19:41 2020: ERROR: Cannot write socket fd = 18 err = Broken pipe
Sun Oct 18 15:19:41 2020: ERROR: CheckRes error
Sun Oct 18 15:19:41 2020: ERROR: Could not write notification
Sun Oct 18 15:19:41 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:19:41 2020: ERROR: Cannot write socket fd = 26 err = Broken pipe
Sun Oct 18 15:19:41 2020: ERROR: CheckRes error
Sun Oct 18 15:19:41 2020: ERROR: Could not write notification
Sun Oct 18 15:19:41 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:19:41 2020: ERROR: Cannot write socket fd = 18 err = Broken pipe
Sun Oct 18 15:19:41 2020: ERROR: CheckRes error
Sun Oct 18 15:19:41 2020: ERROR: Could not write notification
Sun Oct 18 15:19:41 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:19:41 2020: ERROR: Cannot write socket fd = 26 err = Broken pipe
Sun Oct 18 15:19:41 2020: ERROR: CheckRes error
Sun Oct 18 15:19:41 2020: ERROR: Could not write notification
Sun Oct 18 15:19:41 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:27:13 2020: ------------------
Sun Oct 18 15:27:13 2020: Controller activated. Version 1.9.14 (0+) built on Mon Oct  5 15:02:14 2020
Sun Oct 18 15:27:13 2020: Loading settings from "/home/oliv/.config/jack/conf.xml" using expat_2.2.9 ...
Sun Oct 18 15:27:13 2020: setting parameter 'engine':'driver':'(null)' to value "dummy"
Sun Oct 18 15:27:13 2020: Listening for D-Bus messages
Sun Oct 18 15:27:13 2020: Controller deactivated.
Sun Oct 18 15:27:14 2020: ------------------
Sun Oct 18 15:27:14 2020: Controller activated. Version 1.9.14 (0+) built on Mon Oct  5 15:02:14 2020
Sun Oct 18 15:27:14 2020: Loading settings from "/home/oliv/.config/jack/conf.xml" using expat_2.2.9 ...
Sun Oct 18 15:27:14 2020: setting parameter 'engine':'driver':'(null)' to value "dummy"
Sun Oct 18 15:27:14 2020: Listening for D-Bus messages
Sun Oct 18 15:27:14 2020: Controller deactivated.
Sun Oct 18 15:27:15 2020: ------------------
Sun Oct 18 15:27:15 2020: Controller activated. Version 1.9.14 (0+) built on Mon Oct  5 15:02:14 2020
Sun Oct 18 15:27:15 2020: Loading settings from "/home/oliv/.config/jack/conf.xml" using expat_2.2.9 ...
Sun Oct 18 15:27:15 2020: setting parameter 'engine':'driver':'(null)' to value "dummy"
Sun Oct 18 15:27:15 2020: Listening for D-Bus messages
Sun Oct 18 15:27:15 2020: Starting jack server...
Sun Oct 18 15:27:15 2020: JACK server starting in realtime mode with priority 10
Sun Oct 18 15:27:15 2020: self-connect-mode is "Don't restrict self connect requests"
Sun Oct 18 15:27:15 2020: graph reorder: new port 'system:capture_1'
Sun Oct 18 15:27:15 2020: New client 'system' with PID 0
Sun Oct 18 15:27:15 2020: graph reorder: new port 'system:capture_2'
Sun Oct 18 15:27:15 2020: graph reorder: new port 'system:playback_1'
Sun Oct 18 15:27:15 2020: graph reorder: new port 'system:playback_2'
Sun Oct 18 15:27:15 2020: New client 'a2j' with PID 1552
Sun Oct 18 15:27:15 2020: New client 'PulseAudio JACK Sink' with PID 1555
Sun Oct 18 15:27:15 2020: Connecting 'PulseAudio JACK Sink:front-left' to 'system:playback_1'
Sun Oct 18 15:27:15 2020: Connecting 'PulseAudio JACK Sink:front-right' to 'system:playback_2'
Sun Oct 18 15:27:15 2020: New client 'lsp' with PID 1601
Sun Oct 18 15:27:15 2020: Client 'lsp' with PID 1601 is out
Sun Oct 18 15:27:15 2020: New client 'PulseAudio JACK Source' with PID 1555
Sun Oct 18 15:27:15 2020: Connecting 'system:capture_1' to 'PulseAudio JACK Source:front-left'
Sun Oct 18 15:27:15 2020: Connecting 'system:capture_2' to 'PulseAudio JACK Source:front-right'
Sun Oct 18 15:27:15 2020: ------------------
Sun Oct 18 15:27:15 2020: Controller activated. Version 1.9.14 (0+) built on Mon Oct  5 15:02:14 2020
Sun Oct 18 15:27:15 2020: Loading settings from "/home/oliv/.config/jack/conf.xml" using expat_2.2.9 ...
Sun Oct 18 15:27:15 2020: setting parameter 'engine':'driver':'(null)' to value "dummy"
Sun Oct 18 15:27:15 2020: Listening for D-Bus messages
Sun Oct 18 15:27:15 2020: Starting jack server...
Sun Oct 18 15:27:15 2020: JACK server starting in realtime mode with priority 10
Sun Oct 18 15:27:15 2020: self-connect-mode is "Don't restrict self connect requests"
Sun Oct 18 15:27:15 2020: graph reorder: new port 'system:capture_1'
Sun Oct 18 15:27:15 2020: New client 'system' with PID 0
Sun Oct 18 15:27:15 2020: graph reorder: new port 'system:capture_2'
Sun Oct 18 15:27:15 2020: graph reorder: new port 'system:playback_1'
Sun Oct 18 15:27:15 2020: graph reorder: new port 'system:playback_2'
Sun Oct 18 15:27:15 2020: New client 'PulseAudio JACK Sink' with PID 1617
Sun Oct 18 15:27:15 2020: Connecting 'PulseAudio JACK Sink:front-left' to 'system:playback_1'
Sun Oct 18 15:27:15 2020: Connecting 'PulseAudio JACK Sink:front-right' to 'system:playback_2'
Sun Oct 18 15:27:15 2020: New client 'PulseAudio JACK Source' with PID 1617
Sun Oct 18 15:27:15 2020: Connecting 'system:capture_1' to 'PulseAudio JACK Source:front-left'
Sun Oct 18 15:27:15 2020: Connecting 'system:capture_2' to 'PulseAudio JACK Source:front-right'
Sun Oct 18 15:27:16 2020: New client 'a2j' with PID 1552
Sun Oct 18 15:27:16 2020: New client 'lsp' with PID 1666
Sun Oct 18 15:27:16 2020: Client 'lsp' with PID 1666 is out
Sun Oct 18 15:28:07 2020: Client 'a2j' with PID 1552 is out
Sun Oct 18 15:28:07 2020: Stopping jack server...
Sun Oct 18 15:28:07 2020: Client 'system' with PID 0 is out
Sun Oct 18 15:28:07 2020: Client 'PulseAudio JACK Sink' with PID 1617 is out
Sun Oct 18 15:28:07 2020: Client 'PulseAudio JACK Source' with PID 1617 is out
Sun Oct 18 15:28:07 2020: ERROR: Cannot write socket fd = 17 err = Broken pipe
Sun Oct 18 15:28:07 2020: ERROR: CheckRes error
Sun Oct 18 15:28:07 2020: ERROR: Could not write notification
Sun Oct 18 15:28:07 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:28:07 2020: ERROR: Cannot write socket fd = 20 err = Broken pipe
Sun Oct 18 15:28:07 2020: ERROR: CheckRes error
Sun Oct 18 15:28:07 2020: ERROR: Could not write notification
Sun Oct 18 15:28:07 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:28:07 2020: ERROR: Cannot write socket fd = 17 err = Broken pipe
Sun Oct 18 15:28:07 2020: ERROR: CheckRes error
Sun Oct 18 15:28:07 2020: ERROR: Could not write notification
Sun Oct 18 15:28:07 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:28:07 2020: ERROR: Cannot write socket fd = 20 err = Broken pipe
Sun Oct 18 15:28:07 2020: ERROR: CheckRes error
Sun Oct 18 15:28:07 2020: ERROR: Could not write notification
Sun Oct 18 15:28:07 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:28:12 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:28:15 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:28:44 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:28:47 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:28:48 2020: Starting jack server...
Sun Oct 18 15:28:48 2020: JACK server starting in realtime mode with priority 10
Sun Oct 18 15:28:48 2020: self-connect-mode is "Don't restrict self connect requests"
Sun Oct 18 15:28:48 2020: Acquired audio card Audio0
Sun Oct 18 15:28:48 2020: creating alsa driver ... hw:0|hw:0|1024|2|48000|2|2|nomon|swmeter|-|32bit
Sun Oct 18 15:28:48 2020: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
Sun Oct 18 15:28:48 2020: ALSA: final selected sample format for capture: 32bit integer little-endian
Sun Oct 18 15:28:48 2020: ALSA: use 2 periods for capture
Sun Oct 18 15:28:48 2020: ALSA: final selected sample format for playback: 32bit integer little-endian
Sun Oct 18 15:28:48 2020: ALSA: use 2 periods for playback
Sun Oct 18 15:28:48 2020: graph reorder: new port 'system:capture_1'
Sun Oct 18 15:28:48 2020: New client 'system' with PID 0
Sun Oct 18 15:28:48 2020: graph reorder: new port 'system:capture_2'
Sun Oct 18 15:28:48 2020: graph reorder: new port 'system:playback_1'
Sun Oct 18 15:28:48 2020: graph reorder: new port 'system:playback_2'
Sun Oct 18 15:28:48 2020: New client 'PulseAudio JACK Sink' with PID 1617
Sun Oct 18 15:28:48 2020: New client 'a2j' with PID 1552
Sun Oct 18 15:28:48 2020: Connecting 'PulseAudio JACK Sink:front-left' to 'system:playback_1'
Sun Oct 18 15:28:48 2020: Connecting 'PulseAudio JACK Sink:front-right' to 'system:playback_2'
Sun Oct 18 15:28:48 2020: New client 'PulseAudio JACK Source' with PID 1617
Sun Oct 18 15:28:48 2020: Connecting 'system:capture_1' to 'PulseAudio JACK Source:front-left'
Sun Oct 18 15:28:48 2020: Connecting 'system:capture_2' to 'PulseAudio JACK Source:front-right'
Sun Oct 18 15:28:52 2020: New client 'catia' with PID 1904
Sun Oct 18 15:29:06 2020: Client 'catia' with PID 1904 is out
Sun Oct 18 15:29:22 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:30:01 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:30:02 2020: Client 'a2j' with PID 1552 is out
Sun Oct 18 15:30:02 2020: Stopping jack server...
Sun Oct 18 15:30:02 2020: Client 'system' with PID 0 is out
Sun Oct 18 15:30:02 2020: Client 'PulseAudio JACK Sink' with PID 1617 is out
Sun Oct 18 15:30:02 2020: Client 'PulseAudio JACK Source' with PID 1617 is out
Sun Oct 18 15:30:02 2020: ERROR: Cannot write socket fd = 22 err = Broken pipe
Sun Oct 18 15:30:02 2020: ERROR: CheckRes error
Sun Oct 18 15:30:02 2020: ERROR: Could not write notification
Sun Oct 18 15:30:02 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:30:02 2020: ERROR: Cannot write socket fd = 28 err = Broken pipe
Sun Oct 18 15:30:02 2020: ERROR: CheckRes error
Sun Oct 18 15:30:02 2020: ERROR: Could not write notification
Sun Oct 18 15:30:02 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:30:02 2020: Released audio card Audio0
Sun Oct 18 15:30:02 2020: ERROR: Cannot write socket fd = 22 err = Broken pipe
Sun Oct 18 15:30:02 2020: ERROR: CheckRes error
Sun Oct 18 15:30:02 2020: ERROR: Could not write notification
Sun Oct 18 15:30:02 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:30:02 2020: ERROR: Cannot write socket fd = 28 err = Broken pipe
Sun Oct 18 15:30:02 2020: ERROR: CheckRes error
Sun Oct 18 15:30:02 2020: ERROR: Could not write notification
Sun Oct 18 15:30:02 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 15:30:07 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:30:19 2020: Starting jack server...
Sun Oct 18 15:30:19 2020: JACK server starting in realtime mode with priority 10
Sun Oct 18 15:30:19 2020: self-connect-mode is "Don't restrict self connect requests"
Sun Oct 18 15:38:50 2020: ------------------
Sun Oct 18 15:38:50 2020: Controller activated. Version 1.9.14 (0+) built on Mon Oct  5 15:02:14 2020
Sun Oct 18 15:38:50 2020: Loading settings from "/home/oliv/.config/jack/conf.xml" using expat_2.2.9 ...
Sun Oct 18 15:38:50 2020: setting parameter 'engine':'driver':'(null)' to value "firewire"
Sun Oct 18 15:38:50 2020: setting parameter 'drivers':'alsa':'inchannels' to value "0"
Sun Oct 18 15:38:50 2020: setting parameter 'drivers':'alsa':'outchannels' to value "0"
Sun Oct 18 15:38:50 2020: Listening for D-Bus messages
Sun Oct 18 15:38:54 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:38:57 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:39:16 2020: Starting jack server...
Sun Oct 18 15:39:16 2020: JACK server starting in realtime mode with priority 10
Sun Oct 18 15:39:16 2020: self-connect-mode is "Don't restrict self connect requests"
Sun Oct 18 15:39:16 2020: Acquired audio card Audio0
Sun Oct 18 15:39:16 2020: creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
Sun Oct 18 15:39:16 2020: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
Sun Oct 18 15:39:16 2020: ALSA: final selected sample format for capture: 32bit integer little-endian
Sun Oct 18 15:39:16 2020: ALSA: use 2 periods for capture
Sun Oct 18 15:39:16 2020: ALSA: final selected sample format for playback: 32bit integer little-endian
Sun Oct 18 15:39:16 2020: ALSA: use 2 periods for playback
Sun Oct 18 15:39:16 2020: graph reorder: new port 'system:capture_1'
Sun Oct 18 15:39:16 2020: New client 'system' with PID 0
Sun Oct 18 15:39:16 2020: graph reorder: new port 'system:capture_2'
Sun Oct 18 15:39:16 2020: graph reorder: new port 'system:playback_1'
Sun Oct 18 15:39:16 2020: graph reorder: new port 'system:playback_2'
Sun Oct 18 15:39:16 2020: graph reorder: new port 'system:playback_3'
Sun Oct 18 15:39:16 2020: graph reorder: new port 'system:playback_4'
Sun Oct 18 15:39:16 2020: graph reorder: new port 'system:playback_5'
Sun Oct 18 15:39:16 2020: graph reorder: new port 'system:playback_6'
Sun Oct 18 15:39:16 2020: New client 'PulseAudio JACK Sink' with PID 1218
Sun Oct 18 15:39:16 2020: New client 'a2j' with PID 1787
Sun Oct 18 15:39:16 2020: Connecting 'PulseAudio JACK Sink:front-left' to 'system:playback_1'
Sun Oct 18 15:39:16 2020: Connecting 'PulseAudio JACK Sink:front-right' to 'system:playback_2'
Sun Oct 18 15:39:16 2020: New client 'PulseAudio JACK Source' with PID 1218
Sun Oct 18 15:39:16 2020: Connecting 'system:capture_1' to 'PulseAudio JACK Source:front-left'
Sun Oct 18 15:39:16 2020: Connecting 'system:capture_2' to 'PulseAudio JACK Source:front-right'
Sun Oct 18 15:39:19 2020: New client 'catia' with PID 1830
Sun Oct 18 15:39:46 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:40:07 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:40:14 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 15:43:57 2020: New client 'Hydrogen' with PID 3181
Sun Oct 18 15:43:57 2020: ERROR: Unknown destination port in attempted (dis)connection src_name [Hydrogen:out_L] dst_name [alsa_pcm:playback_1]
Sun Oct 18 15:43:57 2020: Connecting 'Hydrogen:out_L' to 'system:playback_1'
Sun Oct 18 15:43:57 2020: Connecting 'Hydrogen:out_R' to 'system:playback_2'
Sun Oct 18 15:51:18 2020: Disconnecting 'Hydrogen:out_L' from 'system:playback_1'
Sun Oct 18 15:51:18 2020: Disconnecting 'Hydrogen:out_R' from 'system:playback_2'
Sun Oct 18 15:51:18 2020: Client 'Hydrogen' with PID 3181 is out
Sun Oct 18 16:08:28 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:09:06 2020: Disconnecting 'system:capture_1' from 'PulseAudio JACK Source:front-left'
Sun Oct 18 16:09:06 2020: Disconnecting 'system:capture_2' from 'PulseAudio JACK Source:front-right'
Sun Oct 18 16:09:06 2020: Disconnecting 'PulseAudio JACK Sink:front-left' from 'system:playback_1'
Sun Oct 18 16:09:06 2020: Disconnecting 'PulseAudio JACK Sink:front-right' from 'system:playback_2'
Sun Oct 18 16:09:06 2020: Client 'system' with PID 0 is out
Sun Oct 18 16:09:06 2020: Released audio card Audio0
Sun Oct 18 16:09:06 2020: New client 'system' with PID 0
Sun Oct 18 16:09:06 2020: Acquired audio card Audio0
Sun Oct 18 16:09:06 2020: creating alsa driver ... hw:Generic,0|hw:Generic,0|1024|2|48000|0|0|nomon|swmeter|-|32bit
Sun Oct 18 16:09:06 2020: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
Sun Oct 18 16:09:06 2020: ALSA: final selected sample format for capture: 32bit integer little-endian
Sun Oct 18 16:09:06 2020: ALSA: use 2 periods for capture
Sun Oct 18 16:09:06 2020: ALSA: final selected sample format for playback: 32bit integer little-endian
Sun Oct 18 16:09:06 2020: ALSA: use 2 periods for playback
Sun Oct 18 16:09:07 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:09:17 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:09:23 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:09:23 2020: Client 'system' with PID 0 is out
Sun Oct 18 16:09:23 2020: Released audio card Audio0
Sun Oct 18 16:09:23 2020: New client 'system' with PID 0
Sun Oct 18 16:09:23 2020: Acquired audio card Audio0
Sun Oct 18 16:09:23 2020: creating alsa driver ... hw:Generic,1|hw:Generic,2|1024|2|48000|0|0|nomon|swmeter|-|32bit
Sun Oct 18 16:09:23 2020: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
Sun Oct 18 16:09:23 2020: ALSA: final selected sample format for capture: 32bit integer little-endian
Sun Oct 18 16:09:23 2020: ALSA: use 2 periods for capture
Sun Oct 18 16:09:23 2020: ALSA: final selected sample format for playback: 32bit integer little-endian
Sun Oct 18 16:09:23 2020: ALSA: use 2 periods for playback
Sun Oct 18 16:09:34 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:09:41 2020: Client 'system' with PID 0 is out
Sun Oct 18 16:09:41 2020: Released audio card Audio0
Sun Oct 18 16:09:41 2020: New client 'system' with PID 0
Sun Oct 18 16:09:41 2020: Acquired audio card Audio0
Sun Oct 18 16:09:41 2020: creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
Sun Oct 18 16:09:41 2020: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
Sun Oct 18 16:09:41 2020: ALSA: final selected sample format for capture: 32bit integer little-endian
Sun Oct 18 16:09:41 2020: ALSA: use 2 periods for capture
Sun Oct 18 16:09:41 2020: ALSA: final selected sample format for playback: 32bit integer little-endian
Sun Oct 18 16:09:41 2020: ALSA: use 2 periods for playback
Sun Oct 18 16:09:42 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:09:52 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:10:02 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:10:07 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:10:20 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:10:22 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:10:24 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 16:11:32 2020: Connecting 'PulseAudio JACK Sink:front-left' to 'system:playback_1'
Sun Oct 18 16:11:37 2020: Connecting 'system:capture_1' to 'PulseAudio JACK Source:front-left'
Sun Oct 18 16:11:40 2020: Client 'catia' with PID 1830 is out
Sun Oct 18 16:12:07 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 17:19:29 2020: Client 'a2j' with PID 1787 is out
Sun Oct 18 17:19:29 2020: Stopping jack server...
Sun Oct 18 17:19:29 2020: Client 'PulseAudio JACK Sink' with PID 1218 is out
Sun Oct 18 17:19:29 2020: Client 'PulseAudio JACK Source' with PID 1218 is out
Sun Oct 18 17:19:29 2020: Client 'system' with PID 0 is out
Sun Oct 18 17:19:29 2020: ERROR: Cannot write socket fd = 20 err = Broken pipe
Sun Oct 18 17:19:29 2020: ERROR: CheckRes error
Sun Oct 18 17:19:29 2020: ERROR: Could not write notification
Sun Oct 18 17:19:29 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 17:19:29 2020: ERROR: Cannot write socket fd = 26 err = Broken pipe
Sun Oct 18 17:19:29 2020: ERROR: CheckRes error
Sun Oct 18 17:19:29 2020: ERROR: Could not write notification
Sun Oct 18 17:19:29 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 17:19:29 2020: Released audio card Audio0
Sun Oct 18 17:19:29 2020: ERROR: Cannot write socket fd = 20 err = Broken pipe
Sun Oct 18 17:19:29 2020: ERROR: CheckRes error
Sun Oct 18 17:19:29 2020: ERROR: Could not write notification
Sun Oct 18 17:19:29 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 17:19:29 2020: ERROR: Cannot write socket fd = 26 err = Broken pipe
Sun Oct 18 17:19:29 2020: ERROR: CheckRes error
Sun Oct 18 17:19:29 2020: ERROR: Could not write notification
Sun Oct 18 17:19:29 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 17:34:27 2020: ------------------
Sun Oct 18 17:34:27 2020: Controller activated. Version 1.9.14 (0+) built on Mon Oct  5 15:02:14 2020
Sun Oct 18 17:34:27 2020: Loading settings from "/home/oliv/.config/jack/conf.xml" using expat_2.2.9 ...
Sun Oct 18 17:34:27 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Sun Oct 18 17:34:27 2020: Listening for D-Bus messages
Sun Oct 18 17:34:27 2020: Starting jack server...
Sun Oct 18 17:34:27 2020: JACK server starting in realtime mode with priority 10
Sun Oct 18 17:34:27 2020: self-connect-mode is "Don't restrict self connect requests"
Sun Oct 18 17:34:27 2020: Acquired audio card Audio0
Sun Oct 18 17:34:27 2020: creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
Sun Oct 18 17:34:27 2020: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
Sun Oct 18 17:34:27 2020: ALSA: final selected sample format for capture: 32bit integer little-endian
Sun Oct 18 17:34:27 2020: ALSA: use 2 periods for capture
Sun Oct 18 17:34:27 2020: ALSA: final selected sample format for playback: 32bit integer little-endian
Sun Oct 18 17:34:27 2020: ALSA: use 2 periods for playback
Sun Oct 18 17:34:27 2020: graph reorder: new port 'system:capture_1'
Sun Oct 18 17:34:27 2020: New client 'system' with PID 0
Sun Oct 18 17:34:27 2020: graph reorder: new port 'system:capture_2'
Sun Oct 18 17:34:27 2020: graph reorder: new port 'system:playback_1'
Sun Oct 18 17:34:27 2020: graph reorder: new port 'system:playback_2'
Sun Oct 18 17:34:27 2020: graph reorder: new port 'system:playback_3'
Sun Oct 18 17:34:27 2020: graph reorder: new port 'system:playback_4'
Sun Oct 18 17:34:27 2020: graph reorder: new port 'system:playback_5'
Sun Oct 18 17:34:27 2020: graph reorder: new port 'system:playback_6'
Sun Oct 18 17:34:28 2020: New client 'PulseAudio JACK Sink' with PID 1266
Sun Oct 18 17:34:28 2020: Connecting 'PulseAudio JACK Sink:front-left' to 'system:playback_1'
Sun Oct 18 17:34:28 2020: Connecting 'PulseAudio JACK Sink:front-right' to 'system:playback_2'
Sun Oct 18 17:34:28 2020: New client 'PulseAudio JACK Source' with PID 1266
Sun Oct 18 17:34:28 2020: Connecting 'system:capture_1' to 'PulseAudio JACK Source:front-left'
Sun Oct 18 17:34:28 2020: Connecting 'system:capture_2' to 'PulseAudio JACK Source:front-right'
Sun Oct 18 17:34:28 2020: New client 'PulseAudio JACK Sink-01' with PID 1266
Sun Oct 18 17:34:28 2020: Connecting 'PulseAudio JACK Sink-01:front-left' to 'system:playback_1'
Sun Oct 18 17:34:28 2020: Connecting 'PulseAudio JACK Sink-01:front-right' to 'system:playback_2'
Sun Oct 18 17:34:28 2020: New client 'PulseAudio JACK Source-01' with PID 1266
Sun Oct 18 17:34:28 2020: Connecting 'system:capture_1' to 'PulseAudio JACK Source-01:front-left'
Sun Oct 18 17:34:28 2020: Connecting 'system:capture_2' to 'PulseAudio JACK Source-01:front-right'
Sun Oct 18 17:34:28 2020: Disconnecting 'PulseAudio JACK Sink:front-left' from 'system:playback_1'
Sun Oct 18 17:34:28 2020: Disconnecting 'PulseAudio JACK Sink:front-right' from 'system:playback_2'
Sun Oct 18 17:34:28 2020: Client 'PulseAudio JACK Sink' with PID 1266 is out
Sun Oct 18 17:34:28 2020: Disconnecting 'system:capture_1' from 'PulseAudio JACK Source:front-left'
Sun Oct 18 17:34:28 2020: Disconnecting 'system:capture_2' from 'PulseAudio JACK Source:front-right'
Sun Oct 18 17:34:28 2020: Client 'PulseAudio JACK Source' with PID 1266 is out
Sun Oct 18 17:34:28 2020: New client 'alsa_out' with PID 2213
Sun Oct 18 17:34:28 2020: Client 'alsa_out' with PID 2213 is out
Sun Oct 18 17:37:40 2020: New client 'a2j' with PID 3300
Sun Oct 18 17:37:56 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 17:38:33 2020: New client 'catia' with PID 3343
Sun Oct 18 17:46:22 2020: Client 'a2j' with PID 3300 is out
Sun Oct 18 17:46:22 2020: Stopping jack server...
Sun Oct 18 17:46:22 2020: Client 'system' with PID 0 is out
Sun Oct 18 17:46:22 2020: Client 'PulseAudio JACK Sink-01' with PID 1266 is out
Sun Oct 18 17:46:22 2020: Client 'PulseAudio JACK Source-01' with PID 1266 is out
Sun Oct 18 17:46:22 2020: Client 'catia' with PID 3343 is out
Sun Oct 18 17:46:22 2020: ERROR: Cannot write socket fd = 26 err = Broken pipe
Sun Oct 18 17:46:22 2020: ERROR: CheckRes error
Sun Oct 18 17:46:22 2020: ERROR: Could not write notification
Sun Oct 18 17:46:22 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 17:46:22 2020: ERROR: Cannot write socket fd = 29 err = Broken pipe
Sun Oct 18 17:46:22 2020: ERROR: CheckRes error
Sun Oct 18 17:46:22 2020: ERROR: Could not write notification
Sun Oct 18 17:46:22 2020: ERROR: ClientNotify fails name = system notification = 1 val1 = 0 val2 = 0
Sun Oct 18 17:46:22 2020: Released audio card Audio0
Sun Oct 18 17:46:22 2020: ERROR: Cannot write socket fd = 26 err = Broken pipe
Sun Oct 18 17:46:22 2020: ERROR: CheckRes error
Sun Oct 18 17:46:22 2020: ERROR: Could not write notification
Sun Oct 18 17:46:22 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 17:46:22 2020: ERROR: Cannot write socket fd = 29 err = Broken pipe
Sun Oct 18 17:46:22 2020: ERROR: CheckRes error
Sun Oct 18 17:46:22 2020: ERROR: Could not write notification
Sun Oct 18 17:46:22 2020: ERROR: ClientNotify fails name = freewheel notification = 1 val1 = 0 val2 = 0
Sun Oct 18 17:57:54 2020: ------------------
Sun Oct 18 17:57:54 2020: Controller activated. Version 1.9.14 (0+) built on Mon Oct  5 15:02:14 2020
Sun Oct 18 17:57:54 2020: Loading settings from "/home/oliv/.config/jack/conf.xml" using expat_2.2.9 ...
Sun Oct 18 17:57:54 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Sun Oct 18 17:57:54 2020: Listening for D-Bus messages
Sun Oct 18 17:58:45 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 17:58:47 2020: Saving settings to "/home/oliv/.config/jack/conf.xml" ...
Sun Oct 18 17:58:52 2020: Starting jack server...
Sun Oct 18 17:58:52 2020: JACK server starting in realtime mode with priority 10
Sun Oct 18 17:58:52 2020: self-connect-mode is "Don't restrict self connect requests"


minimoineau utilisateur non connecté
Alors si tu peux purger les logs avant de les copier, ça sera plus lisible, car tu viens de poster les logs de plusieurs démarrages successifs de Jack!smile
Précise aussi avec quels réglages de Jack tu démarres s'il te plaît.

Un truc me viens à l'esprit : as-tu bien installé les paquets "jackd2-firewire"?

Et que te renvoie ffado-mixer lorsque tu le lances avant jack?

Dan.p utilisateur non connecté
ok, désolé pour les logs.

Alors, jackd2-firewire est installé.

Retour de ffado-mixer lancé avant jack (c'est un peu long):

FFADO Control DBUS service
Part of the FFADO project -- www.ffado.org
Version: 2.4.4
(C) 2008, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------

1603048552618844:  (ffado-dbus-server.cpp)[ 275] main:  Discovering devices...
00142792994:  (dice_avdevice.cpp)[ 714] showDevice:  DICE Parameter Space info:
00142793002:  (dice_avdevice.cpp)[ 715] showDevice:   Global  : offset=0x0028 size=0380
00142793003:  (dice_avdevice.cpp)[ 716] showDevice:   TX      : offset=0x01A4 size=0568
00142793006:  (dice_avdevice.cpp)[ 717] showDevice:                 nb=   2 size=0280
00142793007:  (dice_avdevice.cpp)[ 718] showDevice:   RX      : offset=0x03DC size=1128
00142793009:  (dice_avdevice.cpp)[ 719] showDevice:                 nb=   1 size=0280
00142793011:  (dice_avdevice.cpp)[ 720] showDevice:   UNUSED1 : offset=0x0844 size=0016
00142793013:  (dice_avdevice.cpp)[ 721] showDevice:   UNUSED2 : offset=0x0000 size=0000
00142793014:  (dice_avdevice.cpp)[ 723] showDevice:  Global param space:
00142794638:  (dice_avdevice.cpp)[ 726] showDevice:   Owner            : 0x00000000FFFF0000
00142796943:  (dice_avdevice.cpp)[ 729] showDevice:   Notification     : 0x00000010
00142799966:  (dice_avdevice.cpp)[ 732] showDevice:   Nick name        : Pro26-000001
00142801583:  (dice_avdevice.cpp)[ 735] showDevice:   Clock Select     : 0x02 0x0C
00142802954:  (dice_avdevice.cpp)[ 739] showDevice:   Enable           : false
00142804572:  (dice_avdevice.cpp)[ 743] showDevice:   Clock Status     : locked 0x02
00142806204:  (dice_avdevice.cpp)[ 747] showDevice:   Extended Status  : 0x00000000
00142807810:  (dice_avdevice.cpp)[ 750] showDevice:   Samplerate       : 0x0000BB80 (48000)
00142809181:  (dice_avdevice.cpp)[ 753] showDevice:   Version          : 0x01000C00
00142810786:  (dice_avdevice.cpp)[ 756] showDevice:   Version          : 0x01000C00 (1.0.12.0)
00142812159:  (dice_avdevice.cpp)[ 765] showDevice:   Clock caps       : 0x114C001E
00142813935:  (dice_avdevice.cpp)[ 768] showDevice:   Clock sources    :
00142813938:  (dice_avdevice.cpp)[ 774] showDevice:     AES1
00142813940:  (dice_avdevice.cpp)[ 774] showDevice:     AES2
00142813942:  (dice_avdevice.cpp)[ 774] showDevice:     SPDIF
00142813942:  (dice_avdevice.cpp)[ 774] showDevice:     SPDIF-OPT
00142813944:  (dice_avdevice.cpp)[ 774] showDevice:     AES_ANY
00142813945:  (dice_avdevice.cpp)[ 774] showDevice:     ADAT
00142813947:  (dice_avdevice.cpp)[ 774] showDevice:     ADAT
00142813948:  (dice_avdevice.cpp)[ 774] showDevice:     Word Clock
00142813952:  (dice_avdevice.cpp)[ 774] showDevice:     Unused
00142813953:  (dice_avdevice.cpp)[ 774] showDevice:     Unused
00142813955:  (dice_avdevice.cpp)[ 774] showDevice:     Unused
00142813956:  (dice_avdevice.cpp)[ 774] showDevice:     Unused
00142813958:  (dice_avdevice.cpp)[ 774] showDevice:     Internal
00142813959:  (dice_avdevice.cpp)[ 777] showDevice:  TX param space:
00142813961:  (dice_avdevice.cpp)[ 778] showDevice:   Nb of xmit        : 2
00142813962:  (dice_avdevice.cpp)[ 780] showDevice:   Transmitter 0:
00142815801:  (dice_avdevice.cpp)[ 783] showDevice:    ISO channel       :   0
00142817926:  (dice_avdevice.cpp)[ 785] showDevice:    ISO speed         :   2
00142819554:  (dice_avdevice.cpp)[ 788] showDevice:    Nb audio channels :  10
00142820926:  (dice_avdevice.cpp)[ 790] showDevice:    Nb midi channels  :   1
00142822551:  (dice_avdevice.cpp)[ 793] showDevice:    AC3 caps          : 0x00000000
00142823920:  (dice_avdevice.cpp)[ 795] showDevice:    AC3 enable        : 0x00000000
00142825871:  (dice_avdevice.cpp)[ 798] showDevice:    Channel names     :
00142825873:  (dice_avdevice.cpp)[ 803] showDevice:      IP 1
00142825875:  (dice_avdevice.cpp)[ 803] showDevice:      IP 2
00142825876:  (dice_avdevice.cpp)[ 803] showDevice:      IP 3
00142825878:  (dice_avdevice.cpp)[ 803] showDevice:      IP 4
00142825879:  (dice_avdevice.cpp)[ 803] showDevice:      IP 5
00142825881:  (dice_avdevice.cpp)[ 803] showDevice:      IP 6
00142825882:  (dice_avdevice.cpp)[ 803] showDevice:      SPDIF L
00142825884:  (dice_avdevice.cpp)[ 803] showDevice:      SPDIF R
00142825885:  (dice_avdevice.cpp)[ 803] showDevice:      Loop 1
00142825886:  (dice_avdevice.cpp)[ 803] showDevice:      Loop 2
00142825888:  (dice_avdevice.cpp)[ 780] showDevice:   Transmitter 1:
00142827627:  (dice_avdevice.cpp)[ 783] showDevice:    ISO channel       :   1
00142829003:  (dice_avdevice.cpp)[ 785] showDevice:    ISO speed         :   2
00142830620:  (dice_avdevice.cpp)[ 788] showDevice:    Nb audio channels :   8
00142831994:  (dice_avdevice.cpp)[ 790] showDevice:    Nb midi channels  :   0
00142833609:  (dice_avdevice.cpp)[ 793] showDevice:    AC3 caps          : 0x00000000
00142834981:  (dice_avdevice.cpp)[ 795] showDevice:    AC3 enable        : 0x00000000
00142837600:  (dice_avdevice.cpp)[ 798] showDevice:    Channel names     :
00142837602:  (dice_avdevice.cpp)[ 803] showDevice:      ADAT 1
00142837604:  (dice_avdevice.cpp)[ 803] showDevice:      ADAT 2
00142837605:  (dice_avdevice.cpp)[ 803] showDevice:      ADAT 3
00142837607:  (dice_avdevice.cpp)[ 803] showDevice:      ADAT 4
00142837608:  (dice_avdevice.cpp)[ 803] showDevice:      ADAT 5
00142837610:  (dice_avdevice.cpp)[ 803] showDevice:      ADAT 6
00142837610:  (dice_avdevice.cpp)[ 803] showDevice:      ADAT 7
00142837612:  (dice_avdevice.cpp)[ 803] showDevice:      ADAT 8
00142837613:  (dice_avdevice.cpp)[ 807] showDevice:  RX param space:
00142837615:  (dice_avdevice.cpp)[ 808] showDevice:   Nb of recv        : 1
00142837616:  (dice_avdevice.cpp)[ 810] showDevice:   Receiver 0:
00142839013:  (dice_avdevice.cpp)[ 813] showDevice:    ISO channel       :   2
00142840628:  (dice_avdevice.cpp)[ 815] showDevice:    Sequence start    :   0
00142842001:  (dice_avdevice.cpp)[ 818] showDevice:    Nb audio channels :   8
00142843619:  (dice_avdevice.cpp)[ 820] showDevice:    Nb midi channels  :   1
00142844990:  (dice_avdevice.cpp)[ 823] showDevice:    AC3 caps          : 0x00000000
00142846865:  (dice_avdevice.cpp)[ 825] showDevice:    AC3 enable        : 0x00000000
00142848643:  (dice_avdevice.cpp)[ 828] showDevice:    Channel names     :
00142848645:  (dice_avdevice.cpp)[ 833] showDevice:      Output 1
00142848648:  (dice_avdevice.cpp)[ 833] showDevice:      Output 2
00142848649:  (dice_avdevice.cpp)[ 833] showDevice:      Output 3
00142848650:  (dice_avdevice.cpp)[ 833] showDevice:      Output 4
00142848651:  (dice_avdevice.cpp)[ 833] showDevice:      Output 5
00142848653:  (dice_avdevice.cpp)[ 833] showDevice:      Output 6
00142848654:  (dice_avdevice.cpp)[ 833] showDevice:      Output 7
00142848659:  (dice_avdevice.cpp)[ 833] showDevice:      Output 8
00142856221:  (ffado-dbus-server.cpp)[ 334] main: DBUS service running
00142856228:  (ffado-dbus-server.cpp)[ 335] main: press ctrl-c to stop it & exit
00142856230: Debug (ffado-dbus-server.cpp)[ 338] main: dispatching...


Et j'ai une fenêtre avec le mixer ffado, les entrées et sortie de ma carte.

minimoineau utilisateur non connecté
Salut Dan!
Super, FFADOmixer démarre et semble reconnaître ta carte avec toutes tes entrées/sorties!smile
A partir de là, je navigue à vue car je ne connais pas cette interface, mais je possède une carte Firewire aussi, alors je vais me baser sur ma config.

Est-ce que la fenêtre du mixer ffado te permet de sélectionner la fréquence d'échantillonnage de ta carte (sample rate), ou est-ce que tu as un sélecteur directement sur l'interface?

Dans tous les cas, il faut faire en sorte d'avoir la même dans les réglages de Jack (via Cadence).

Une fois FFADOmixer démarré, tente de démarrer Jack sur le pilote firewire avec la bonne fréquence d'échantillonnage et renvoie nous les logs pour voir.

On approche du but!wink

Dan.p utilisateur non connecté
Salut Minimoineau,

j'apprécie ton optimisme! Merci!

La fenêtre ffado-mixer me permet de sélectionner la fréquence d’échantillonnage ainsi que Clock Source.

Sample rate a 48000 pour ffado-mixer et jack pilote firewire à 48000 aussi :

Coté Jack :
Image

Coté ffadomixer :
Dans les logs
Image
et dans le terminal avec la première ligne en rouge:
~~#F00:00337135268: ~~#F00:Error (dice_avdevice.cpp)[1752] readReg: Could not read from node 0xFFC0 addr 0xFFFFE000008C~~ ~~                                                                      
12:29:20 panelmanager     ERROR    error in pollPanels
12:29:45 panelmanager     ERROR    The communication with ffado-dbus-server was lost.
Traceback (most recent call last):
  File "/usr/share/ffado-mixer-qt4/ffado/panelmanager.py", line 154, in pollPanels
    child.polledUpdate()
  File "/usr/share/ffado-mixer-qt4/ffado/mixer/globalmixer.py", line 186, in polledUpdate
    self.refreshSampleRates();
  File "/usr/share/ffado-mixer-qt4/ffado/mixer/globalmixer.py", line 106, in refreshSampleRates
    n_rates = self.samplerateselect.count()
  File "/usr/share/ffado-mixer-qt4/ffado/dbus_util.py", line 431, in count
    return self.iface.count()
  File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 141, in __call__
    return self._connection.call_blocking(self._named_service,
  File "/usr/lib/python3/dist-packages/dbus/connection.py", line 652, in call_blocking
    reply_message = self.send_message_with_reply_and_block(
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/share/ffado-mixer-qt4/ffado/panelmanager.py", line 207, in commCheck
    nbDevices = self.devmgr.getNbDevices()
  File "/usr/share/ffado-mixer-qt4/ffado/dbus_util.py", line 327, in getNbDevices
    return self.iface.getNbElements()
  File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 141, in __call__
    return self._connection.call_blocking(self._named_service,
  File "/usr/lib/python3/dist-packages/dbus/connection.py", line 652, in call_blocking
    reply_message = self.send_message_with_reply_and_block(
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/share/ffado-mixer-qt4/ffado/panelmanager.py", line 157, in pollPanels
    self.commCheck()
  File "/usr/share/ffado-mixer-qt4/ffado/panelmanager.py", line 214, in commCheck
    for panel in keys:
RuntimeError: dictionary changed size during iteration


A noter que la communication avec la carte se fait pendant quelques secondes, les deux leds, "fw" et "lkd" s'allument puis "fw" s’éteint, "lkd" reste allumée
.

minimoineau utilisateur non connecté
OK.
C'est peut-être un problème d'horloge.
Tu dis que tu peux choisir le "Clock Source" dans FFADOmixer. As-tu quelque chose du genre "Internal Clock"?
Essaye de modifier ça pour voir si la connexion tient... confused

minimoineau utilisateur non connecté
Autre chose,
Peux-tu vérifier que tu appartiens bien au groupe audio avec l'utilitaire "utilisateurs et groupes" d'Ubuntu. C'est très important et ça peut régler bien des soucis! On aurait peut-être du commencer par là... redface

Prend cinq minutes pour lire cette page
Car si tu as installé un noyau temps réel (?) il faut que le système y ait accès.

Je sais que ça peut paraître compliqué et un peu rébarbatif, mais ces optimisations sont importantes à faire dans une distribution généraliste comme Ubuntu. Cela dit, c'est plutôt instructif!wink

Note que si tu veux éviter tout ça, tu peux installer une distribution déjà optimisée comme Librazik ou UbuntuStudio...

Dan.p utilisateur non connecté
J'avoue que c'est un peu rude comme entrée en la matière!

je suis bien dans le groupe audio.

j'ai changé l'internal clock, mais pas mieux!

Est ce que ça pourrai venir d'un problème de compatibilité entre linux et ma carte pcie firewire sur laquelle est branchée la focusrite?

je vais peut être tenté librazik et voir ce qui ce passe.

minimoineau utilisateur non connecté
Si tu as une partition libre, tu peux tenter le coup. C'est pas sur à 100%, mais cette distribution est vraiment au top question optimisation pour l'audio, et on n'aura plus à chercher de ce côté.
En plus, pas mal de gens utilisent cette distribution sur LinuxMAO, et en plus son développeur (Olinuxx pour ne pas le nommer!) est aussi l'admin de ce site!

Ce qui est sur, c'est que ta carte son est déjà utilisée par d'autres avec succès sous linuxsmile. J'ai lu pas mal te trucs sur le net et c'est dur de faire la part des choses
.
Je ne pense pas qu'il y ait de soucis avec ta carte firewire. C'est un protocole plutôt bien supporté me semble-t-il.
Mes compétences restent limitées à mes propres expériences, et là je commence à sècher... Mais je continue de réfléchir (pas du genre à lacher twisted!!!)

J'ai mis un petit moment pour la mienne, et maintenant elle fonctionne au poil!wink

minimoineau utilisateur non connecté
Pour apporter quelque précisions, j'ai lu sur plusieurs sites que les cartes Saffire sont bien prises en charge par Alsa.
A creuser donc...

bda utilisateur non connecté France
Perso, dans des cas similaires, la première chose que je vérifie est l'alimentation de la carte. Une alimentation un peu fatiguée ou faiblarde peut poser ce genre de soucis. Même simplement un connecteur un peu oxydé ou abîmé.

minimoineau utilisateur non connecté
Salut Dan!
Je viens de tomber sur cette page qui parle de l'installation d'une Saffire Pro 40 (qui fait partie de la même série que la pro 26).

C'est un peu ancien, mais assez détaillé, et j'ai noté quelques différences avec ce qu'on a tenté :
  • Ici on utilise jackd1, jack1-firewire et pas jack2
  • on lance ffado-dbus-server AVANT ffado-mixer, puis il lance Jack sur le pilote firewire.

Ça peut peut-être marcher...wink

@bda : Tu as tout-à-fait raison, contrôler alim et câbles, on ne le fait jamais assez smile!

Page : 1/2  [Suivant]
1  2 
Afficher les articles :
Aller au forum :

Documentation [Afficher / Cacher]

Connexion
[Afficher / Cacher]



Mégaphone [Afficher / Cacher]

olinuxx, 16:23, jeu. 22 Oct 2020: Bonjour et bienvenue à Sherkaan cool
CyrilRos, 23:43, mer. 21 Oct 2020: Le noyau temps réel passe en version 5.9 sur Tux|N|Mix [Lien]
calixtus06, 08:56, mer. 21 Oct 2020: Bienvenue à Akashbro120 :-)
olinuxx, 14:03, mar. 20 Oct 2020: Bonjour et bienvenue à rico211 cool
calixtus06, 10:46, mar. 20 Oct 2020: Bienvenue à toi fran_studio :-)
minimoineau, 15:20, lun. 19 Oct 2020: Salut à tous, on aurait besoin d'aide pour faire tourner une Saffire pro 26 dans le forum [Lien] svp!
calixtus06, 20:40, sam. 17 Oct 2020: Bienvenu à Dan.p :-)
olinuxx, 19:34, sam. 17 Oct 2020: Bonjour et bienvenue à Dan.p cool
calixtus06, 23:00, ven. 16 Oct 2020: Bienvenue à MorganeH :-)
calixtus06, 09:56, jeu. 15 Oct 2020: Bienvenue à Michelk ! :-)
olinuxx, 14:44, mar. 13 Oct 2020: Merci @Sahaathyva, ça fait plaisir. @tous : n'hésitez pas à commenter l'édito, ça fait plaisir de voir que le travail est apprécié !
Sahaathyva, 10:49, mar. 13 Oct 2020: Encore 1 super edito, merci a vous !!!