Chargement...
 
Skip to main content

1 - Le matériel et les pilotes ALSA, FFADO, ...


ffado FA66 avec JACK - Tango studio [Contourné]

Bonjour,
après bien du temps j'installe ma Thinkstation Lenovo sous Tango Studio 2.2
Install impec

JACK ne trouve pas mon interface Firewire

Je vous met le résultat des deux commandes demandée 😊
et je vous met surtout le résultat du diag de ffado. J'y vois en apparence un pbm de Path, mais je suis largé en techno et commande système et plus trop envie de replonger dans le réaprentissage vu tout ce qu'il y a à apprendre dans la conduire des outils MAO.

Donc, merci de votre aide.

Koban

Copy to clipboard
koban@PC-Lenovo:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf7d34000 irq 43 1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7d30000 irq 43 2 [Loopback ]: Loopback - Loopback Loopback 1 koban@PC-Lenovo:~$ aplay -l


Copy to clipboard
**** Liste des Périphériques Matériels PLAYBACK **** carte 1: PCH [HDA Intel PCH], périphérique 0: ALC662 rev3 Analog [ALC662 rev3 Analog] Sous-périphériques: 1/1 Sous-périphérique #0: subdevice #0 carte 2: Loopback [Loopback], périphérique 0: Loopback PCM [Loopback PCM] Sous-périphériques: 8/8 Sous-périphérique #0: subdevice #0 Sous-périphérique #1: subdevice #1 Sous-périphérique #2: subdevice #2 Sous-périphérique #3: subdevice #3 Sous-périphérique #4: subdevice #4 Sous-périphérique #5: subdevice #5 Sous-périphérique #6: subdevice #6 Sous-périphérique #7: subdevice #7 carte 2: Loopback [Loopback], périphérique 1: Loopback PCM [Loopback PCM] Sous-périphériques: 8/8 Sous-périphérique #0: subdevice #0 Sous-périphérique #1: subdevice #1 Sous-périphérique #2: subdevice #2 Sous-périphérique #3: subdevice #3 Sous-périphérique #4: subdevice #4 Sous-périphérique #5: subdevice #5 Sous-périphérique #6: subdevice #6 Sous-périphérique #7: subdevice #7



Copy to clipboard
FFADO diagnostic utility 2.1.9999 ============================ (C) 2008 Pieter Palmers 2009-2010 Arnold Krille === CHECK === Base system... kernel version............ 3.2.0-4-realtime-686-pae Preempt (low latency)... False RT patched.............. True old 1394 stack present.... False old 1394 stack loaded..... False old 1394 stack active..... False new 1394 stack present.... True new 1394 stack loaded..... True new 1394 stack active..... True /dev/raw1394 node present. False /dev/fw* permissions: crw------- 1 root root 252, 0 sept. 16 18:44 /dev/fw0 User IDs: uid=1000(koban) gid=1000(koban) groupes=1000(koban),20(dialout),24(cdrom),25(floppy),29(audio),30(dip),44(video),46(plugdev),100(users),103(fuse),105(scanner),110(bluetooth),111(netdev),114(powerdev) Prerequisites (dynamic at run-time)... gcc ............... gcc (Debian 4.7.2-5) 4.7.2 g++ ............... sh: 1: g++: not found PyQt4 (by pyuic4) . sh: 1: pyuic4: not found jackd ............. no message buffer overruns path ............ /usr/bin/jackd flags ........... Package jack was not found in the pkg-config search path. Perhaps you should add the directory containing `jack.pc' to the PKG_CONFIG_PATH environment variable No package 'jack' found libraw1394 ........ Package libraw1394 was not found in the pkg-config search path. Perhaps you should add the directory containing `libraw1394.pc' to the PKG_CONFIG_PATH environment variable No package 'libraw1394' found flags ........... Package libraw1394 was not found in the pkg-config search path. Perhaps you should add the directory containing `libraw1394.pc' to the PKG_CONFIG_PATH environment variable No package 'libraw1394' found libavc1394 ........ Package libavc1394 was not found in the pkg-config search path. Perhaps you should add the directory containing `libavc1394.pc' to the PKG_CONFIG_PATH environment variable No package 'libavc1394' found flags ........... Package libavc1394 was not found in the pkg-config search path. Perhaps you should add the directory containing `libavc1394.pc' to the PKG_CONFIG_PATH environment variable No package 'libavc1394' found libiec61883 ....... Package libiec61883 was not found in the pkg-config search path. Perhaps you should add the directory containing `libiec61883.pc' to the PKG_CONFIG_PATH environment variable No package 'libiec61883' found flags ........... Package libiec61883 was not found in the pkg-config search path. Perhaps you should add the directory containing `libiec61883.pc' to the PKG_CONFIG_PATH environment variable No package 'libiec61883' found libxml++-2.6 ...... Package libxml++-2.6 was not found in the pkg-config search path. Perhaps you should add the directory containing `libxml++-2.6.pc' to the PKG_CONFIG_PATH environment variable No package 'libxml++-2.6' found flags ........... Package libxml++-2.6 was not found in the pkg-config search path. Perhaps you should add the directory containing `libxml++-2.6.pc' to the PKG_CONFIG_PATH environment variable No package 'libxml++-2.6' found dbus-1 ............ Package dbus-1 was not found in the pkg-config search path. Perhaps you should add the directory containing `dbus-1.pc' to the PKG_CONFIG_PATH environment variable No package 'dbus-1' found flags ........... Package dbus-1 was not found in the pkg-config search path. Perhaps you should add the directory containing `dbus-1.pc' to the PKG_CONFIG_PATH environment variable No package 'dbus-1' found Prerequisites (static at compile-time)... gcc ............... gcc (Debian 4.7.2-5) 4.7.2 g++ ............... g++ (Debian 4.7.2-5) 4.7.2 PyQt4 (by pyuic4) . Python User Interface Compiler 4.9.3 for Qt version 4.8.2 jackd ............. sh: 1: jackd: not found path ............ flags ........... Package jack was not found in the pkg-config search path. libraw1394 ........ 2.0.9 flags ........... -lraw1394 libavc1394 ........ Package libavc1394 was not found in the pkg-config search path. flags ........... Package libavc1394 was not found in the pkg-config search path. libiec61883 ....... 1.2.0 flags ........... -liec61883 -lraw1394 libxml++-2.6 ...... 2.34.2 flags ........... -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/i386-linux-gnu/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/i386-linux-gnu/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/i386-linux-gnu/glib-2.0/include -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lglib-2.0 dbus-1 ............ 1.6.8 flags ........... -I/usr/include/dbus-1.0 -I/usr/lib/i386-linux-gnu/dbus-1.0/include -ldbus-1 uname -a... Linux PC-Lenovo 3.2.0-4-realtime-686-pae #1 SMP PREEMPT RT Debian 3.2.57-3+tstudio.2 i686 GNU/Linux Hardware... Host controllers: 03:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller [104c:8025] (rev 01) (prog-if 10 [OHCI]) Subsystem: AFAVLAB Technology Inc Device [14db:702a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-

Salut

Si tu veux bien rééditer ton post stp et mettre le contenu dans des boites appropriées en utilisant l'outil qui va bien : Image .

Il va falloir que t'en dise un peu plus mais je te prévient il n'y a plus de support pour tangostudio donc ceux qui répondront ici feront de leur mieux.

Dans l'ordre il me faut les résultats de ceci:
Copy to clipboard
uname -ra


Je pense qu'il doit y avoir un soucis dans les sources.list :
Copy to clipboard
cat /etc/apt/sources.list

Copy to clipboard
ls /etc/apt/sources.list.d/


Logiquement sur la dernière iso tu doit avoir dans ton résultat un fichier qui s'appelle mate-desktop.list
tu le vire (root)
Copy to clipboard
rm -f mate-desktop.list

Tu recharge la liste (apt-get update)
Ensuite tu installe ces logiciels:

Copy to clipboard
apt-get install libffado2

puis
Copy to clipboard
apt-get install jackd2-firewire ffado-mixer-qt4

Ensuite tu reboot
Une fois que c'est fait tu vas sur la page Edirol FA-101 ça fonctionne pareil

 Attention
Si tu compte rester sur tangostudio je le répète elle n'est plus maintenue donc tu va devoir jongler avec plusieurs dépôts à commencer par les backports de wheezy.
Surtout ne touche pas à tout ce qui est lié à mate (le bureau) voir ce lien pour plus d'info
Avant de faire une mise à jour assure toi d'avoir bien commenté le dépôt suivant:
Copy to clipboard
# deb http://ftp.fr.debian.org/debian/ wheezy-backports non-free contrib main # deb-src http://ftp.fr.debian.org/debian/ wheezy-backports non-free contrib main

toute mise à jour faite avec ce dépôt dé-commenté te casse le bureau et là tu devras recommencer à zéro.

Hello
voici déjà les infos demandées

Copy to clipboard
koban@PC-Lenovo:~$ uname -ra Linux PC-Lenovo 3.2.0-4-realtime-686-pae #1 SMP PREEMPT RT Debian 3.2.57-3+tstudio.2 i686 GNU/Linux

Copy to clipboard
koban@PC-Lenovo:~$ cat /etc/apt/sources.list # # deb cdrom:[Debian GNU/Linux 7.0.0 _Wheezy_ - Official Snapshot i386 LIVE/INSTALL Binary 20140602-14:27]/ wheezy contrib main non-free deb cdrom:[Debian GNU/Linux 7.0.0 _Wheezy_ - Official Snapshot i386 LIVE/INSTALL Binary 20140602-14:27]/ wheezy contrib main non-free # Line commented out by installer because it failed to verify: #deb http://security.debian.org/ wheezy/updates main contrib non-free # Line commented out by installer because it failed to verify: #deb-src http://security.debian.org/ wheezy/updates main contrib non-free

Copy to clipboard
koban@PC-Lenovo:~$ ls /etc/apt/sources.list.d/ mate-desktop.list tangostudio.list tangostudio-non-free.list


Ensuite je ferai les manips à tête reposée.
Merci de ta réponse rapide. Faut croire qu'il y a des types qui ne dorment jamais 😊

Pour Tango Studio, j'ai vu; mais tant qu'à faire, je démarre pour apprendre avec un truc stable et sobre, quitte à voir ailleurs quand je maitriserai les outils sons.
Cordialement
Koban
Salut

ok donc c'est bien ce que je pensai il te manque des choses:


Copy to clipboard
pluma /etc/apt/sources.list

Tu efface tout réédite le contenu


Copy to clipboard
deb http://security.debian.org/ wheezy/updates main contrib non-free deb-src http://security.debian.org/ wheezy/updates main contrib non-free # deb http://ftp.fr.debian.org/debian/ wheezy-backports non-free contrib main # deb-src http://ftp.fr.debian.org/debian/ wheezy-backports non-free contrib main


Depuis synaptic tu pourras activer le dépôt des backports à la demande.

Tu supprime comme je te disais le dépôt mate-desktop et tu met à jour tout le système
Copy to clipboard
apt-get dist-upgrade

Au reboot tu relance
Copy to clipboard
uname -ra

qui devrait te sortir une version n°
Copy to clipboard
Linux PC-Lenovo 3.2.0-4-realtime-686-pae #1 SMP PREEMPT RT Debian 3.2.63-2+tstudio.3 i686 GNU/Linux

qui correspond à la dernière compilation avant l'arrêt de la tangostudio.
Voilà si t'as besoin n'hésite pas.

Bonne journée
France
Des nouvelles KobanGM60 ?
Hello
Quelque pbm perso m'ont tenu éloigné.
Je vais laisser tomber le sujet et passer sous Ubuntu Studio
Merci de l'aide apportée.
A+
France
OK, mets un [CONTOURNÉ] dans le titre du fil de discussion en éditant le premier message et je fermerai à mon prochain passage de maintenance.