Chargement...
 
Skip to main content

3 - Le home-studio, les instruments et le DIY


ubuntu 16.04 changer ordre des cartes son

bonjour à tous

j'avance avc un sujet sans doute archiment rebattu
mais même après avoir suivi les instructions de ce tutoriel
Fixer l'ordre des cartes-son
ça ne change rien
L'ordre dees cartes reste le même

mon but final est avant toute chose de désactiver la carte hdmi
de faire passer ma carte externe Lexicon Alpha en carte 0
et ma carte Generic en carte 1

quelqu'un peut-il superviser et m'indiquer ce qui a cloché dans la démarche

Merci d'avance

voici donc

Copy to clipboard
cat /proc/asound/modules 0 snd_hda_intel 1 snd_hda_intel 2 snd_usb_audio


Copy to clipboard
aplay -l **** Liste des Périphériques Matériels PLAYBACK **** carte 0: HDMI [HDA ATI HDMI], périphérique 3: HDMI 0 [HDMI 0] Sous-périphériques: 1/1 Sous-périphérique #0: subdevice #0 carte 1: Generic [HD-Audio Generic], périphérique 0: ALC282 Analog [ALC282 Analog] Sous-périphériques: 0/1 Sous-périphérique #0: subdevice #0 carte 2: Alpha [Lexicon Alpha], périphérique 0: USB Audio [USB Audio] Sous-périphériques: 0/1 Sous-périphérique #0: subdevice #0


J'ai donc modifié l'ordre, mais rien n'y fait, rien du tout

où ai-je fait une erreur ?

Copy to clipboard
sudo nano /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-2 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-0 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 #options bt87x index=-2 #options cx88_alsa index=-2 #options saa7134-alsa index=-2 #options snd-atiixp-modem index=-2 #options snd-intel8x0m index=-2 #options snd-via82xx-modem index=-2 #options snd-usb-audio index=-2 #options snd-usb-caiaq index=-2 #options snd-usb-ua101 index=-2 #options snd-usb-us122l index=-2 #options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from being loaded as first soundcard options snd-usb-audio index=-2 # Prevent snd-aloop from being loaded as first soundcard options snd-aloop index=-2

France
où ai-je fait une erreur ?


Là :
Copy to clipboard
0 snd_hda_intel 1 snd_hda_intel 2 snd_usb_audio


Il te faut mettre le pilote de la lexicon en premier, et c'est probablement pas le snd_hda_intel.
ok mais restant tout de même une bille = comment je procède ?
France
En suivant le tuto.
S'il y a quelque chose que tu ne comprends pas, explique le précisément ici.
ma question me semble claire, tout du moins = comment changer l'ordre des cartes, et donc des modules

En suivant à la lettre le tuto,et de par un "sudo nano /etc/modprobe.d/alsa-base.conf" j'ai pourtant placé le slot 2 (lexicon) en carte 0, ainsi que le slot 1 (carte Generic intégrée) en carte 1, et le slot 0 (cette foutue hdmi) en carte 2
et rien n'y a fait
je viens de refaire un coup de aplay -l, pas un mouvement, la carte 0 est toujours et encor HDMI

Où est l'erreur ?
France
raskolink écrit:
ma question me semble claire, tout du moins = comment changer l'ordre des cartes, et donc des modules


Là question, oui, mais pour la démarche et les étapes que tu as faites, c'est loin d'être le cas !



raskolink écrit:
En suivant à la lettre le tuto,et de par un "sudo nano /etc/modprobe.d/alsa-base.conf" j'ai pourtant placé le slot 2 (lexicon) en carte 0, ainsi que le slot 1 (carte Generic intégrée) en carte 1, et le slot 0 (cette foutue hdmi) en carte 2
et rien n'y a fait


Copie le /etc/modprobe.d/alsa-base.conf ici, parce que là, nos boules magiques sont en réparation. 😉
Si c'est la dernière partie de ce qu'il y a dans ton message initial, alors ça ne me semble pas correct.

Dernière question : quel est le nom du pilote pour la lexicon ?
oui, réglons ça au carré

Copy to clipboard
cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xf0240000 irq 38 1 [Alpha ]: USB-Audio - Lexicon Alpha Lexicon Lexicon Alpha at usb-0000:00:12.0-1, full speed 2 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xf0244000 irq 39


Copy to clipboard
aplay -l **** Liste des Périphériques Matériels PLAYBACK **** carte 0: HDMI [HDA ATI HDMI], périphérique 3: HDMI 0 [HDMI 0] Sous-périphériques: 1/1 Sous-périphérique #0: subdevice #0 carte 1: Alpha [Lexicon Alpha], périphérique 0: USB Audio [USB Audio] Sous-périphériques: 0/1 Sous-périphérique #0: subdevice #0 carte 2: Generic [HD-Audio Generic], périphérique 0: ALC282 Analog [ALC282 Analog] Sous-périphériques: 1/1 Sous-périphérique #0: subdevice #0


Copy to clipboard
# autoloader aliases install sound-slot-1 /sbin/modprobe snd-card-0 install sound-slot-2 /sbin/modprobe snd-card-1 install sound-slot-0 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 #options bt87x index=-2 #options cx88_alsa index=-2 #options saa7134-alsa index=-2 #options snd-atiixp-modem index=-2 #options snd-intel8x0m index=-2 #options snd-via82xx-modem index=-2 #options snd-usb-audio index=-2 #options snd-usb-caiaq index=-2 #options snd-usb-ua101 index=-2 #options snd-usb-us122l index=-2 #options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from being loaded as first soundcard options snd-usb-audio index=-2 # Prevent snd-aloop from being loaded as first soundcard options snd-aloop index=-2

Copy to clipboard
cat /proc/asound/modules 0 snd_hda_intel 1 snd_usb_audio 2 snd_hda_intel

France
Tu n'as pas répondu à ma question précédente :
quel est le nom du pilote pour la lexicon ?


je ne suis pas un expert

quelle est la bonne commande pour avoir cette info ?
celles-ci ?

Copy to clipboard
inxi -A Audio: Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel Card-2 Advanced Micro Devices [AMD/ATI] Kabini HDMI/DP Audio driver: snd_hda_intel Card-3 DigiTech driver: USB Audio Sound: Advanced Linux Sound Architecture v: k4.17.5-041705-generic


Copy to clipboard
lsmod | grep snd snd_seq_dummy 16384 2 snd_hrtimer 16384 1 snd_hda_codec_realtek 102400 1 snd_hda_codec_hdmi 49152 1 snd_hda_codec_generic 73728 1 snd_hda_codec_realtek snd_usb_audio 200704 3 snd_hda_intel 40960 0 snd_hda_codec 126976 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek snd_hda_core 81920 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek snd_usbmidi_lib 32768 1 snd_usb_audio snd_hwdep 20480 2 snd_usb_audio,snd_hda_codec snd_pcm 98304 7 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_hda_core snd_seq_midi 16384 0 snd_seq_midi_event 16384 1 snd_seq_midi snd_rawmidi 32768 2 snd_seq_midi,snd_usbmidi_lib snd_seq 65536 8 snd_seq_midi,snd_seq_midi_event,snd_seq_dummy snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi snd_timer 32768 3 snd_seq,snd_hrtimer,snd_pcm snd 81920 18 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi soundcore 16384 1 snd

France
Le plus simple pour vérifier quel module noyau cette interface audio utilise est de :
1) démarrer la machine avec la lexicon physiquement déconnectée
2) faire un lsmod (et copier le résultat)
3) faire un dmesg en super utilisateur
4) connecter la lexicon
5) refaire un lsmod (et comparer avec le résultat précédent)
6) refaire un dmesg en super utilisateur et comparer avec le résultat précédent

Mon intuition est que la lexicon utilise le snd_usb_audio, on va vérifier ça.
salut
A ce niveau,tu peux me faire le coup de la boule de crystal, je n'y pige rien
je note seulement que certaines lignes du dmesg (avec lexicon) sont en rouge et parlent de =
Copy to clipboard
25.997040] usb 3-1: 1:1: cannot get freq at ep 0x1 [ 26.007042] usb 3-1: 1:2: cannot get freq at ep 0x1 [ 26.019040] usb 3-1: 2:1: cannot get freq at ep 0x82



(je précise aussi que, problème récurrent, la lexicon "décroche" de temps à autre.Alors je ferme la session et la relance, et cela rentr dans l'ordre)



Que vois-tu ?




SANS LA LEXICON =

Copy to clipboard
lsmod Module Size Used by snd_seq_dummy 16384 0 snd_hrtimer 16384 0 ccm 20480 6 bnep 20480 2 zram 24576 4 amd_freq_sensitivity 16384 0 edac_mce_amd 28672 0 ccp 81920 0 kvm 618496 0 irqbypass 16384 1 kvm uvcvideo 94208 0 videobuf2_vmalloc 16384 1 uvcvideo crct10dif_pclmul 16384 0 videobuf2_memops 16384 1 videobuf2_vmalloc crc32_pclmul 16384 0 videobuf2_v4l2 24576 1 uvcvideo snd_hda_codec_realtek 102400 1 snd_hda_codec_hdmi 49152 1 snd_hda_codec_generic 73728 1 snd_hda_codec_realtek videobuf2_common 40960 2 videobuf2_v4l2,uvcvideo ghash_clmulni_intel 16384 0 snd_hda_intel 40960 0 videodev 184320 3 videobuf2_v4l2,uvcvideo,videobuf2_common media 40960 2 videodev,uvcvideo snd_hda_codec 126976 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek pcbc 16384 0 aesni_intel 200704 4 snd_usb_audio 200704 0 snd_usbmidi_lib 32768 1 snd_usb_audio snd_hda_core 81920 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek snd_hwdep 20480 2 snd_usb_audio,snd_hda_codec aes_x86_64 20480 1 aesni_intel crypto_simd 16384 1 aesni_intel snd_pcm 98304 5 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_hda_core snd_seq_midi 16384 0 snd_seq_midi_event 16384 1 snd_seq_midi snd_rawmidi 32768 2 snd_seq_midi,snd_usbmidi_lib cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel glue_helper 16384 1 aesni_intel joydev 20480 0 ath3k 20480 0 snd_seq 65536 3 snd_seq_midi,snd_seq_midi_event,snd_seq_dummy input_leds 16384 0 serio_raw 16384 0 btusb 45056 0 btrtl 16384 1 btusb btbcm 16384 1 btusb btintel 20480 1 btusb arc4 16384 2 bluetooth 544768 27 btrtl,btintel,btbcm,bnep,ath3k,btusb snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi ath9k 151552 0 ecdh_generic 24576 1 bluetooth acer_wmi 20480 0 snd_timer 32768 3 snd_seq,snd_hrtimer,snd_pcm sparse_keymap 16384 1 acer_wmi ath9k_common 36864 1 ath9k ath9k_hw 475136 2 ath9k_common,ath9k ath 28672 3 ath9k_common,ath9k,ath9k_hw snd 81920 13 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi wmi_bmof 16384 0 mac80211 798720 1 ath9k cfg80211 659456 4 ath9k_common,ath9k,ath,mac80211 soundcore 16384 1 snd fam15h_power 16384 0 k10temp 16384 0 shpchp 36864 0 i2c_piix4 24576 0 mac_hid 16384 0 binfmt_misc 20480 1 parport_pc 36864 0 ppdev 20480 0 lp 20480 0 parport 49152 3 parport_pc,lp,ppdev autofs4 40960 2 amdgpu 2699264 0 chash 16384 1 amdgpu gpu_sched 24576 1 amdgpu hid_generic 16384 0 usbhid 49152 0 hid 122880 2 usbhid,hid_generic radeon 1454080 56 i2c_algo_bit 16384 2 amdgpu,radeon ttm 110592 2 amdgpu,radeon drm_kms_helper 172032 2 amdgpu,radeon syscopyarea 16384 1 drm_kms_helper sysfillrect 16384 1 drm_kms_helper sysimgblt 16384 1 drm_kms_helper fb_sys_fops 16384 1 drm_kms_helper sdhci_pci 36864 0 psmouse 147456 0 drm 405504 9 gpu_sched,drm_kms_helper,amdgpu,radeon,ttm alx 45056 0 ahci 36864 2 cqhci 24576 1 sdhci_pci mdio 16384 1 alx libahci 32768 1 ahci sdhci 49152 1 sdhci_pci wmi 24576 2 acer_wmi,wmi_bmof video 45056 1 acer_wmi


Copy to clipboard
sudo dmesg [ 0.000000] Linux version 4.17.5-041705-generic (kernel@kathleen) (gcc version 7.3.0 (Ubuntu 7.3.0-24ubuntu1)) #201807081431 SMP Sun Jul 8 14:33:41 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.17.5-041705-generic root=UUID=ad77c70a-ee3f-4db4-b07e-f8a1c59c61e8 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b4b1efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b4b1f000-0x00000000b531ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b5320000-0x00000000b537bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b537c000-0x00000000b677bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b677c000-0x00000000bf77efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf77f000-0x00000000bf97efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf97f000-0x00000000bfb7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfb7f000-0x00000000bfbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire E1-522/Aspire E1-522, BIOS V2.02 05/03/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00BFB67000 mask FFFFFFF000 uncachable [ 0.000000] 3 base 00FFC00000 mask FFFFC00000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000011f000000 aka 4592M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xbfc00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x11a94a000, 0x11a94afff] PGTABLE [ 0.000000] BRK [0x11a94b000, 0x11a94bfff] PGTABLE [ 0.000000] BRK [0x11a94c000, 0x11a94cfff] PGTABLE [ 0.000000] BRK [0x11a94d000, 0x11a94dfff] PGTABLE [ 0.000000] BRK [0x11a94e000, 0x11a94efff] PGTABLE [ 0.000000] BRK [0x11a94f000, 0x11a94ffff] PGTABLE [ 0.000000] BRK [0x11a950000, 0x11a950fff] PGTABLE [ 0.000000] BRK [0x11a951000, 0x11a951fff] PGTABLE [ 0.000000] BRK [0x11a952000, 0x11a952fff] PGTABLE [ 0.000000] BRK [0x11a953000, 0x11a953fff] PGTABLE [ 0.000000] BRK [0x11a954000, 0x11a954fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31a14000-0x34d01fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x00000000BFBFE120 0000A4 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000BFBFC000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 0x00000000BFBEE000 009FCD (v01 ACRSYS ACRPRDCT F0000000 1025 00040000) [ 0.000000] ACPI: FACS 0x00000000BFB26000 000040 [ 0.000000] ACPI: UEFI 0x00000000BFBFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0x00000000BFBFB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 0x00000000BFBFA000 000090 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0x00000000BFBF9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASF! 0x00000000BFBF8000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: BOOT 0x00000000BFBED000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: WDRT 0x00000000BFBEC000 000047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: WDAT 0x00000000BFBEB000 0001AC (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: FPDT 0x00000000BFBEA000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MSDM 0x00000000BFBE8000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBE7000 000CB4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBE0000 006352 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBDE000 0013CA (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBDD000 000D61 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBDB000 0010C2 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11efd5000-0x11effffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b4b1efff] [ 0.000000] node 0: [mem 0x00000000b5320000-0x00000000b537bfff] [ 0.000000] node 0: [mem 0x00000000b677c000-0x00000000bf77efff] [ 0.000000] node 0: [mem 0x00000000bfbff000-0x00000000bfbfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] [ 0.000000] On node 0 totalpages: 903965 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12078 pages used for memmap [ 0.000000] DMA32 zone: 772991 pages, LIFO batch:31 [ 0.000000] Normal zone: 1984 pages used for memmap [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 9443 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb4b1f000-0xb531ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb537c000-0xb677bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf77f000-0xbf97efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf97f000-0xbfb7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfb7f000-0xbfbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfc00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 889818 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.17.5-041705-generic root=UUID=ad77c70a-ee3f-4db4-b07e-f8a1c59c61e8 ro quiet splash vt.handoff=7 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3411368K/3615860K available (12300K kernel code, 2520K rwdata, 4344K rodata, 2432K init, 2384K bss, 204492K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 40400 entries in 158 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180313 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 1996.342 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x398d5e21404, max_idle_ns: 881590739801 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.68 BogoMIPS (lpj=7985368) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] CPU: Physical Processor ID: 0 [ 0.024000] CPU: Processor Core ID: 0 [ 0.024000] mce: CPU supports 6 MCE banks [ 0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.024000] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 [ 0.024000] Spectre V2 : Mitigation: Full AMD retpoline [ 0.024000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch [ 0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.024000] Freeing SMP alternatives memory: 36K [ 0.036000] smpboot: CPU0: AMD A6-5200 APU with Radeon(TM) HD Graphics (family: 0x16, model: 0x0, stepping: 0x1) [ 0.036000] Performance Events: AMD PMU driver. [ 0.036000] ... version: 0 [ 0.036000] ... bit width: 48 [ 0.036000] ... generic registers: 4 [ 0.036000] ... value mask: 0000ffffffffffff [ 0.036000] ... max period: 00007fffffffffff [ 0.036000] ... fixed-purpose events: 0 [ 0.036000] ... event mask: 000000000000000f [ 0.036000] Hierarchical SRCU implementation. [ 0.036000] smp: Bringing up secondary CPUs ... [ 0.036000] x86: Booting SMP configuration: [ 0.036000] .... node #0, CPUs: #1 [ 0.004000] do_IRQ: 1.55 No irq handler for vector [ 0.036097] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.036278] #2 [ 0.004000] do_IRQ: 2.55 No irq handler for vector [ 0.040287] #3 [ 0.004000] do_IRQ: 3.55 No irq handler for vector [ 0.044056] smp: Brought up 1 node, 4 CPUs [ 0.044056] smpboot: Max logical packages: 1 [ 0.044056] smpboot: Total of 4 processors activated (15970.73 BogoMIPS) [ 0.044741] devtmpfs: initialized [ 0.044741] x86/mm: Memory block size: 128MB [ 0.044941] evm: security.selinux [ 0.044943] evm: security.SMACK64 [ 0.044943] evm: security.SMACK64EXEC [ 0.044944] evm: security.SMACK64TRANSMUTE [ 0.044945] evm: security.SMACK64MMAP [ 0.044946] evm: security.apparmor [ 0.044947] evm: security.ima [ 0.044947] evm: security.capability [ 0.044974] PM: Registering ACPI NVS region [mem 0xbf97f000-0xbfb7efff] (2097152 bytes) [ 0.044974] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.044974] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.044974] pinctrl core: initialized pinctrl subsystem [ 0.044974] RTC time: 16:22:35, date: 08/09/19 [ 0.044974] NET: Registered protocol family 16 [ 0.044974] audit: initializing netlink subsys (disabled) [ 0.044974] audit: type=2000 audit(1565367755.044:1): state=initialized audit_enabled=0 res=1 [ 0.048024] cpuidle: using governor ladder [ 0.048031] cpuidle: using governor menu [ 0.048055] Simple Boot Flag at 0x44 set to 0x1 [ 0.048079] ACPI: bus type PCI registered [ 0.048081] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.048203] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.048213] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.048213] PCI: Using configuration type 1 for base access [ 0.048345] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.048346] mtrr: probably your BIOS does not setup all CPUs. [ 0.048346] mtrr: corrected configuration. [ 0.050221] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.050221] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.052175] ACPI: Added _OSI(Module Device) [ 0.052177] ACPI: Added _OSI(Processor Device) [ 0.052178] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052180] ACPI: Added _OSI(Processor Aggregator Device) [ 0.052182] ACPI: Added _OSI(Linux-Dell-Video) [ 0.085299] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.094602] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.103636] ACPI: EC: EC started [ 0.103637] ACPI: EC: interrupt blocked [ 0.116141] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC [ 0.116145] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.116149] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions [ 0.116150] ACPI: Interpreter enabled [ 0.116190] ACPI: (supports S0 S3 S4 S5) [ 0.116193] ACPI: Using IOAPIC for interrupt routing [ 0.116793] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.117836] ACPI: Enabled 3 GPEs in block 00 to 1F [ 0.136464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.136476] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.137060] acpi PNP0A08:00: _OSC: platform does not support [PME] [ 0.137620] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability] [ 0.137651] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.137920] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff]) [ 0.138332] PCI host bridge to bus 0000:00 [ 0.138336] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.138339] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.138341] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.138344] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.138346] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.138349] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.138351] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.138354] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.138356] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.138359] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.138361] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.138363] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.138366] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.138368] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.138371] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.138373] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window] [ 0.138376] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window] [ 0.138378] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.138392] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000 [ 0.138592] pci 0000:00:01.0: [1002:9830] type 00 class 0x030000 [ 0.138615] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.138626] pci 0000:00:01.0: reg 0x18: [mem 0xf0800000-0xf0ffffff 64bit pref] [ 0.138634] pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff] [ 0.138642] pci 0000:00:01.0: reg 0x24: [mem 0xf0200000-0xf023ffff] [ 0.138650] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.138655] pci 0000:00:01.0: enabling Extended Tags [ 0.138703] pci 0000:00:01.0: supports D1 D2 [ 0.138706] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.138890] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 [ 0.138911] pci 0000:00:01.1: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit] [ 0.138942] pci 0000:00:01.1: enabling Extended Tags [ 0.138986] pci 0000:00:01.1: supports D1 D2 [ 0.139143] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000 [ 0.139334] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400 [ 0.139375] pci 0000:00:02.2: enabling Extended Tags [ 0.139425] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.139609] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400 [ 0.139650] pci 0000:00:02.3: enabling Extended Tags [ 0.139700] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold [ 0.139906] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330 [ 0.139934] pci 0000:00:10.0: reg 0x10: [mem 0xf0248000-0xf0249fff 64bit] [ 0.140042] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.140234] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 [ 0.140256] pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f] [ 0.140265] pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127] [ 0.140273] pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117] [ 0.140282] pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123] [ 0.140291] pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f] [ 0.140300] pci 0000:00:11.0: reg 0x24: [mem 0xf024e000-0xf024e3ff] [ 0.140352] pci 0000:00:11.0: PME# supported from D3hot [ 0.140675] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.140693] pci 0000:00:12.0: reg 0x10: [mem 0xf024d000-0xf024dfff] [ 0.140911] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.140931] pci 0000:00:12.2: reg 0x10: [mem 0xf024c000-0xf024c0ff] [ 0.141004] pci 0000:00:12.2: supports D1 D2 [ 0.141007] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141174] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 0.141192] pci 0000:00:13.0: reg 0x10: [mem 0xf024b000-0xf024bfff] [ 0.141412] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 0.141432] pci 0000:00:13.2: reg 0x10: [mem 0xf024a000-0xf024a0ff] [ 0.141505] pci 0000:00:13.2: supports D1 D2 [ 0.141508] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141676] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.141895] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.141919] pci 0000:00:14.2: reg 0x10: [mem 0xf0244000-0xf0247fff 64bit] [ 0.141988] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.142149] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.142372] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000 [ 0.142535] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000 [ 0.142693] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000 [ 0.142851] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000 [ 0.143017] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000 [ 0.143174] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000 [ 0.143441] pci 0000:01:00.0: [1969:10a1] type 00 class 0x020000 [ 0.143476] pci 0000:01:00.0: reg 0x10: [mem 0xf1000000-0xf103ffff 64bit] [ 0.143488] pci 0000:01:00.0: reg 0x18: [io 0x2000-0x207f] [ 0.143608] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.143743] pci 0000:01:00.1: [1969:3010] type 00 class 0x080501 [ 0.143778] pci 0000:01:00.1: reg 0x10: [mem 0xf1040000-0xf10400ff 64bit] [ 0.143901] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.156124] pci 0000:00:02.2: PCI bridge to [bus 01-04] [ 0.156133] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff] [ 0.156139] pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff] [ 0.156145] pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.156328] pci 0000:05:00.0: [168c:0036] type 00 class 0x028000 [ 0.156365] pci 0000:05:00.0: reg 0x10: [mem 0xf0100000-0xf017ffff 64bit] [ 0.156415] pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.156507] pci 0000:05:00.0: supports D1 D2 [ 0.156510] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168112] pci 0000:00:02.3: PCI bridge to [bus 05] [ 0.168125] pci 0000:00:02.3: bridge window [mem 0xf0100000-0xf01fffff] [ 0.170480] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.170704] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.170935] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.171168] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.171364] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.171508] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.171652] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.171796] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.172395] ACPI: EC: interrupt unblocked [ 0.172412] ACPI: EC: event unblocked [ 0.172422] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.172425] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.172572] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.172572] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.172572] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.172572] vgaarb: loaded [ 0.172572] SCSI subsystem initialized [ 0.172572] libata version 3.00 loaded. [ 0.172572] ACPI: bus type USB registered [ 0.172572] usbcore: registered new interface driver usbfs [ 0.172572] usbcore: registered new interface driver hub [ 0.172572] usbcore: registered new device driver usb [ 0.172572] pps_core: LinuxPPS API ver. 1 registered [ 0.172572] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.172572] PTP clock support registered [ 0.172572] EDAC MC: Ver: 3.0.0 [ 0.172572] PCI: Using ACPI for IRQ routing [ 0.173845] PCI: pci_cache_line_size set to 64 bytes [ 0.173913] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.173916] e820: reserve RAM buffer [mem 0xb4b1f000-0xb7ffffff] [ 0.173918] e820: reserve RAM buffer [mem 0xb537c000-0xb7ffffff] [ 0.173919] e820: reserve RAM buffer [mem 0xbf77f000-0xbfffffff] [ 0.173921] e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff] [ 0.173923] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] [ 0.174129] NetLabel: Initializing [ 0.174130] NetLabel: domain hash size = 128 [ 0.174131] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.174159] NetLabel: unlabeled traffic allowed by default [ 0.174190] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.174190] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.177077] clocksource: Switched to clocksource tsc-early [ 0.202003] VFS: Disk quotas dquot_6.6.0 [ 0.202035] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.202261] AppArmor: AppArmor Filesystem Enabled [ 0.202326] pnp: PnP ACPI init [ 0.202775] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved [ 0.202779] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.202789] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.203126] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.203228] system 00:02: [io 0x0400-0x04cf] has been reserved [ 0.203231] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.203239] system 00:02: [io 0x04d6] has been reserved [ 0.203242] system 00:02: [io 0x0680-0x06ff] has been reserved [ 0.203245] system 00:02: [io 0x077a] has been reserved [ 0.203247] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.203250] system 00:02: [io 0x0c14] has been reserved [ 0.203252] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.203255] system 00:02: [io 0x0c6c] has been reserved [ 0.203257] system 00:02: [io 0x0c6f] has been reserved [ 0.203260] system 00:02: [io 0x0cd0-0x0cdb] could not be reserved [ 0.203263] system 00:02: [io 0x0840-0x0847] has been reserved [ 0.203271] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.203447] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.203451] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.203458] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.203642] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.203743] pnp 00:05: Plug and Play ACPI device, IDs ETD0509 PNP0f13 (active) [ 0.205102] pnp: PnP ACPI: found 6 devices [ 0.212984] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.212996] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with Reserved [mem 0xffc00000-0xffffffff] [ 0.213000] pci 0000:05:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.213038] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0260000-0xf027ffff pref] [ 0.213044] pci 0000:00:02.2: PCI bridge to [bus 01-04] [ 0.213048] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff] [ 0.213053] pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff] [ 0.213057] pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.213065] pci 0000:05:00.0: BAR 6: assigned [mem 0xf0180000-0xf018ffff pref] [ 0.213067] pci 0000:00:02.3: PCI bridge to [bus 05] [ 0.213073] pci 0000:00:02.3: bridge window [mem 0xf0100000-0xf01fffff] [ 0.213084] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.213086] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.213089] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.213091] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.213094] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.213096] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.213098] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] [ 0.213101] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] [ 0.213103] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] [ 0.213105] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] [ 0.213108] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] [ 0.213110] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] [ 0.213112] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] [ 0.213115] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] [ 0.213117] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window] [ 0.213119] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window] [ 0.213122] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window] [ 0.213124] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.213126] pci_bus 0000:01: resource 1 [mem 0xf1000000-0xf1ffffff] [ 0.213129] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.213131] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff] [ 0.213311] NET: Registered protocol family 2 [ 0.213688] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) [ 0.213724] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.213859] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.214032] TCP: Hash tables configured (established 32768 bind 32768) [ 0.214110] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.214140] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.214232] NET: Registered protocol family 1 [ 0.214261] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.214270] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0 [ 0.298711] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c0 took 75473 usecs [ 0.298989] pci 0000:00:12.2: PME# does not work under D3, disabling it [ 0.378707] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c0 took 77828 usecs [ 0.378987] pci 0000:00:13.2: PME# does not work under D3, disabling it [ 0.379022] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag [ 0.379035] PCI: CLS 64 bytes, default 64 [ 0.379133] Unpacking initramfs... [ 1.677836] Freeing initrd memory: 52152K [ 1.677975] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.677980] software IO TLB [mem 0xbb77f000-0xbf77f000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 1.678083] amd_uncore: AMD NB counters detected [ 1.678155] amd_uncore: AMD LLC counters detected [ 1.678347] LVT offset 0 assigned for vector 0x400 [ 1.678406] perf: AMD IBS detected (0x000000ff) [ 1.678513] Scanning for low memory corruption every 60 seconds [ 1.679842] Initialise system trusted keyrings [ 1.679860] Key type blacklist registered [ 1.679921] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.682905] zbud: loaded [ 1.683738] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.684134] fuse init (API version 7.26) [ 1.684266] pstore: using deflate compression [ 1.686687] Key type asymmetric registered [ 1.686689] Asymmetric key parser 'x509' registered [ 1.686748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.686811] io scheduler noop registered [ 1.686813] io scheduler deadline registered [ 1.686901] io scheduler cfq registered (default) [ 1.687759] vesafb: mode is 1366x768x32, linelength=5632, pages=0 [ 1.687760] vesafb: scrolling: redraw [ 1.687763] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.687787] vesafb: framebuffer at 0xe0000000, mapped to 0x (ptrval), using 4224k, total 4224k [ 1.759435] Console: switching to colour frame buffer device 170x48 [ 1.830729] fb0: VESA VGA frame buffer device [ 1.831382] ACPI: AC Adapter [ADP1] (on-line) [ 1.831472] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.831493] ACPI: Power Button [PWRB] [ 1.831572] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.831592] ACPI: Lid Switch [LID0] [ 1.831658] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.831672] ACPI: Sleep Button [SLPB] [ 1.831737] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.831750] ACPI: Power Button [PWRF] [ 1.836460] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.836462] ACPI: Thermal Zone [TZS0] (60 C) [ 1.837167] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.837169] ACPI: Thermal Zone [TZS1] (37 C) [ 1.837410] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.838786] ACPI: Battery Slot [BAT0] (battery present) [ 1.841261] Linux agpgart interface v0.103 [ 1.844695] loop: module loaded [ 1.845468] libphy: Fixed MDIO Bus: probed [ 1.845470] tun: Universal TUN/TAP device driver, 1.6 [ 1.845561] PPP generic driver version 2.4.2 [ 1.845645] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.845660] ehci-pci: EHCI PCI platform driver [ 1.845975] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.845986] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.845994] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.846004] ehci-pci 0000:00:12.2: debug port 1 [ 1.846069] ehci-pci 0000:00:12.2: irq 17, io mem 0xf024c000 [ 1.860203] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.860316] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 1.860319] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.860322] usb usb1: Product: EHCI Host Controller [ 1.860324] usb usb1: Manufacturer: Linux 4.17.5-041705-generic ehci_hcd [ 1.860326] usb usb1: SerialNumber: 0000:00:12.2 [ 1.860598] hub 1-0:1.0: USB hub found [ 1.860612] hub 1-0:1.0: 4 ports detected [ 1.861099] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.861109] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.861115] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.861126] ehci-pci 0000:00:13.2: debug port 1 [ 1.861166] ehci-pci 0000:00:13.2: irq 17, io mem 0xf024a000 [ 1.876182] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.876305] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 1.876308] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.876310] usb usb2: Product: EHCI Host Controller [ 1.876313] usb usb2: Manufacturer: Linux 4.17.5-041705-generic ehci_hcd [ 1.876315] usb usb2: SerialNumber: 0000:00:13.2 [ 1.876630] hub 2-0:1.0: USB hub found [ 1.876644] hub 2-0:1.0: 4 ports detected [ 1.876967] ehci-platform: EHCI generic platform driver [ 1.877004] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.877009] ohci-pci: OHCI PCI platform driver [ 1.877273] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.877286] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.877334] ohci-pci 0000:00:12.0: irq 18, io mem 0xf024d000 [ 1.940271] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17 [ 1.940276] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.940278] usb usb3: Product: OHCI PCI host controller [ 1.940281] usb usb3: Manufacturer: Linux 4.17.5-041705-generic ohci_hcd [ 1.940283] usb usb3: SerialNumber: 0000:00:12.0 [ 1.940581] hub 3-0:1.0: USB hub found [ 1.940596] hub 3-0:1.0: 4 ports detected [ 1.941074] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.941085] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 1.941127] ohci-pci 0000:00:13.0: irq 18, io mem 0xf024b000 [ 2.004264] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17 [ 2.004269] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.004271] usb usb4: Product: OHCI PCI host controller [ 2.004274] usb usb4: Manufacturer: Linux 4.17.5-041705-generic ohci_hcd [ 2.004276] usb usb4: SerialNumber: 0000:00:13.0 [ 2.004651] hub 4-0:1.0: USB hub found [ 2.004666] hub 4-0:1.0: 4 ports detected [ 2.004995] ohci-platform: OHCI generic platform driver [ 2.005025] uhci_hcd: USB Universal Host Controller Interface driver [ 2.005320] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.005330] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 2.005506] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410 [ 2.005868] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 2.005871] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.005873] usb usb5: Product: xHCI Host Controller [ 2.005875] usb usb5: Manufacturer: Linux 4.17.5-041705-generic xhci-hcd [ 2.005877] usb usb5: SerialNumber: 0000:00:10.0 [ 2.006061] hub 5-0:1.0: USB hub found [ 2.006074] hub 5-0:1.0: 2 ports detected [ 2.006237] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.006243] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 [ 2.006249] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed [ 2.008911] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.008951] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17 [ 2.008954] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.008956] usb usb6: Product: xHCI Host Controller [ 2.008958] usb usb6: Manufacturer: Linux 4.17.5-041705-generic xhci-hcd [ 2.008960] usb usb6: SerialNumber: 0000:00:10.0 [ 2.009142] hub 6-0:1.0: USB hub found [ 2.009155] hub 6-0:1.0: 2 ports detected [ 2.009385] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.017635] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.017643] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.017922] mousedev: PS/2 mouse device common for all mice [ 2.018285] rtc_cmos 00:01: RTC can wake from S4 [ 2.018435] rtc_cmos 00:01: registered as rtc0 [ 2.018466] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.018478] i2c /dev entries driver [ 2.018589] device-mapper: uevent: version 1.0.3 [ 2.018705] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 2.018808] ledtrig-cpu: registered to indicate activity on CPUs [ 2.019495] NET: Registered protocol family 10 [ 2.026584] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.028475] Segment Routing with IPv6 [ 2.028517] NET: Registered protocol family 17 [ 2.028586] Key type dns_resolver registered [ 2.029000] RAS: Correctable Errors collector initialized. [ 2.029007] microcode: microcode updated early to new patch_level=0x0700010f [ 2.029069] microcode: CPU0: patch_level=0x0700010f [ 2.029076] microcode: CPU1: patch_level=0x0700010f [ 2.029086] microcode: CPU2: patch_level=0x0700010f [ 2.029112] microcode: CPU3: patch_level=0x0700010f [ 2.029173] microcode: Microcode Update Driver: v2.2. [ 2.029192] sched_clock: Marking stable (2029165543, 0)->(3122660452, -1093494909) [ 2.029588] registered taskstats version 1 [ 2.029608] Loading compiled-in X.509 certificates [ 2.035534] Loaded X.509 cert 'Build time autogenerated kernel key: 8526455a0f05256cf46d4be52827255c2c71a657' [ 2.035585] zswap: loaded using pool lzo/zbud [ 2.043815] Key type big_key registered [ 2.043824] Key type trusted registered [ 2.047816] Key type encrypted registered [ 2.047822] AppArmor: AppArmor sha1 policy hashing enabled [ 2.047829] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.047837] ima: Allocated hash algorithm: sha1 [ 2.047873] evm: HMAC attrs: 0x1 [ 2.048708] Magic number: 15:208:388 [ 2.048729] usb usb6: hash matches [ 2.048773] thermal cooling_device3: hash matches [ 2.048931] rtc_cmos 00:01: setting system clock to 2019-08-09 16:22:38 UTC (1565367758) [ 2.049195] acpi_cpufreq: overriding BIOS provided _PSD data [ 2.054722] Freeing unused kernel memory: 2432K [ 2.084191] Write protecting the kernel read-only data: 20480k [ 2.085280] Freeing unused kernel memory: 2008K [ 2.094300] Freeing unused kernel memory: 1800K [ 2.117158] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.135362] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.135535] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.135560] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.216037] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.227648] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2.228550] acpi device:00: registered as cooling_device4 [ 2.228671] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 2.247493] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 2.272950] sdhci: Secure Digital Host Controller Interface driver [ 2.272953] sdhci: Copyright(c) Pierre Ossman [ 2.276458] ahci 0000:00:11.0: version 3.0 [ 2.277290] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.277295] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part [ 2.289594] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [30:65:ec:05:86:72] [ 2.289664] sdhci-pci 0000:01:00.1: SDHCI controller found [1969:3010] (rev 13) [ 2.290685] mmc0: SDHCI controller on PCI [0000:01:00.1] using ADMA [ 2.294385] scsi host0: ahci [ 2.294788] scsi host1: ahci [ 2.294877] ata1: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e100 irq 31 [ 2.294881] ata2: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e180 irq 31 [ 2.327829] alx 0000:01:00.0 enp1s0f0: renamed from eth0 [ 2.340051] usb 5-1: new low-speed USB device number 2 using xhci_hcd [ 2.362410] [drm] radeon kernel modesetting enabled. [ 2.362495] checking generic (e0000000 420000) vs hw (e0000000 10000000) [ 2.362496] fb: switching to radeondrmfb from VESA VGA [ 2.362543] Console: switching to colour dummy device 80x25 [ 2.363216] [drm] initializing kernel modesetting (KABINI 0x1002:0x9830 0x1025:0x076B 0x00). [ 2.363245] [drm] doorbell mmio base: 0xF0800000 [ 2.363247] [drm] doorbell mmio size: 8388608 [ 2.363274] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window] [ 2.363283] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs [ 2.364675] ATOM BIOS: AMD [ 2.364744] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 2.364747] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF [ 2.364755] [drm] Detected VRAM RAM=512M, BAR=256M [ 2.364756] [drm] RAM width 128bits DDR [ 2.364861] [TTM] Zone kernel: Available graphics memory: 1734898 kiB [ 2.364863] [TTM] Initializing pool allocator [ 2.364871] [TTM] Initializing DMA pool allocator [ 2.364906] [drm] radeon: 512M of VRAM memory ready [ 2.364908] [drm] radeon: 2048M of GTT memory ready. [ 2.364922] [drm] Loading kabini Microcode [ 2.365129] [drm] Internal thermal controller without fan control [ 2.365624] [drm] radeon: dpm initialized [ 2.365800] [drm] Found UVD firmware Version: 1.55 Family ID: 9 [ 2.367877] [drm] Found VCE firmware/feedback version 40.2.2 / 15! [ 2.367891] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 2.408074] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000). [ 2.408291] radeon 0000:00:01.0: WB enabled [ 2.408312] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x (ptrval) [ 2.408315] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x (ptrval) [ 2.408318] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x (ptrval) [ 2.408321] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x (ptrval) [ 2.408323] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x (ptrval) [ 2.409203] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x00000000000782b0 and cpu addr 0x (ptrval) [ 2.409536] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x (ptrval) [ 2.409538] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x (ptrval) [ 2.409543] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.409544] [drm] Driver supports precise vblank timestamp query. [ 2.409622] radeon 0000:00:01.0: radeon: using MSI. [ 2.409661] [drm] radeon: irq initialized. [ 2.412482] [drm] ring test on 0 succeeded in 3 usecs [ 2.412559] [drm] ring test on 1 succeeded in 3 usecs [ 2.412578] [drm] ring test on 2 succeeded in 3 usecs [ 2.412791] [drm] ring test on 3 succeeded in 4 usecs [ 2.412799] [drm] ring test on 4 succeeded in 4 usecs [ 2.458527] [drm] ring test on 5 succeeded in 1 usecs [ 2.478400] [drm] UVD initialized successfully. [ 2.478425] usb 2-1: New USB device found, idVendor=04f2, idProduct=b336, bcdDevice=13.08 [ 2.478428] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.478430] usb 2-1: Product: HD WebCam [ 2.478433] usb 2-1: Manufacturer: HD WebCam [ 2.517961] usb 5-1: New USB device found, idVendor=0461, idProduct=4d22, bcdDevice= 2.00 [ 2.517964] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.517966] usb 5-1: Product: USB Optical Mouse [ 2.520021] usb 3-1: new full-speed USB device number 2 using ohci-pci [ 2.529832] hidraw: raw HID events driver (C) Jiri Kosina [ 2.544260] usbcore: registered new interface driver usbhid [ 2.544261] usbhid: USB HID core driver [ 2.547470] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.0/0003:0461:4D22.0001/input/input8 [ 2.547647] hid-generic 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:10.0-1/input0 [ 2.587648] [drm] ring test on 6 succeeded in 16 usecs [ 2.587662] [drm] ring test on 7 succeeded in 4 usecs [ 2.587663] [drm] VCE initialized successfully. [ 2.588741] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.588901] [drm] ib test on ring 1 succeeded in 0 usecs [ 2.589057] [drm] ib test on ring 2 succeeded in 0 usecs [ 2.589216] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.589371] [drm] ib test on ring 4 succeeded in 0 usecs [ 2.609418] [drm] ib test on ring 5 succeeded [ 2.630101] [drm] ib test on ring 6 succeeded [ 2.630801] [drm] ib test on ring 7 succeeded [ 2.635097] [drm] radeon atom DIG backlight initialized [ 2.635100] [drm] Radeon Display Connectors [ 2.635101] [drm] Connector 0: [ 2.635102] [drm] eDP-1 [ 2.635103] [drm] HPD1 [ 2.635105] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 2.635106] [drm] Encoders: [ 2.635107] [drm] LCD1: INTERNAL_UNIPHY [ 2.635108] [drm] Connector 1: [ 2.635108] [drm] HDMI-A-1 [ 2.635109] [drm] HPD2 [ 2.635111] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 2.635112] [drm] Encoders: [ 2.635112] [drm] DFP1: INTERNAL_UNIPHY [ 2.635113] [drm] Connector 2: [ 2.635114] [drm] VGA-1 [ 2.635116] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc [ 2.635117] [drm] Encoders: [ 2.635118] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.719081] usb 3-1: config 1 has an invalid interface number: 4 but max is 3 [ 2.719086] usb 3-1: config 1 has no interface number 3 [ 2.727056] usb 3-1: New USB device found, idVendor=1210, idProduct=000a, bcdDevice= 0.01 [ 2.727059] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.727061] usb 3-1: Product: Lexicon Alpha [ 2.727064] usb 3-1: Manufacturer: Lexicon [ 2.772053] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.772079] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.773549] ata2.00: ATAPI: MATSHITADVD-RAM UJ8D2Q, 1.10, max UDMA/133 [ 2.774670] ata2.00: configured for UDMA/133 [ 2.798488] ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133 [ 2.798491] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.837328] ata1.00: configured for UDMA/133 [ 2.837633] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 SDM1 PQ: 0 ANSI: 5 [ 2.838028] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.838034] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.838037] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.838061] sd 0:0:0:0: [sda] Write Protect is off [ 2.838064] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.838113] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.839502] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8D2Q 1.10 PQ: 0 ANSI: 5 [ 2.876376] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x254f00) [ 2.890857] psmouse serio1: elantech: Synaptics capabilities query result 0x69, 0x16, 0x0c. [ 2.905349] psmouse serio1: elantech: Elan sample query result 02, 65, 75 [ 2.926173] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 2.927058] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.932040] usb 4-2: new full-speed USB device number 2 using ohci-pci [ 2.986412] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7 [ 3.121047] usb 4-2: New USB device found, idVendor=04ca, idProduct=300b, bcdDevice= 0.01 [ 3.121051] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.717670] tsc: Refined TSC clocksource calibration: 1996.255 MHz [ 3.717685] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398cb85cd06, max_idle_ns: 881590416994 ns [ 3.717709] clocksource: Switched to clocksource tsc [ 3.738269] [drm] fb mappable at 0xE0722000 [ 3.738271] [drm] vram apper at 0xE0000000 [ 3.738273] [drm] size 4325376 [ 3.738275] [drm] fb depth is 24 [ 3.738276] [drm] pitch is 5632 [ 3.738456] fbcon: radeondrmfb (fb0) is primary device [ 5.870697] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.870701] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.871032] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.871181] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.929064] Console: switching to colour frame buffer device 170x48 [ 5.934286] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 5.959614] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 [ 6.029835] [drm] amdgpu kernel modesetting enabled. [ 6.039401] random: fast init done [ 12.188466] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) [ 13.033026] random: crng init done [ 13.033031] random: 7 urandom warning(s) missed due to ratelimiting [ 13.941962] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 13.960456] systemd[1]: Detected architecture x86-64. [ 13.961074] systemd[1]: Set hostname to <raskol-K50AB>. [ 16.433538] systemd[1]: Listening on udev Control Socket. [ 16.433751] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 16.433809] systemd[1]: Listening on Syslog Socket. [ 16.433827] systemd[1]: Reached target Remote File Systems (Pre). [ 16.434025] systemd[1]: Created slice User and Session Slice. [ 16.434094] systemd[1]: Listening on Journal Socket. [ 16.434158] systemd[1]: Listening on Journal Socket (/dev/log). [ 17.270721] lp: driver loaded but no devices found [ 17.303968] ppdev: user-space parallel port driver [ 17.629255] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro [ 18.590705] systemd-journald[271]: Received request to flush runtime journal from PID 1 [ 22.144571] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 22.144575] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ 22.146008] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 22.577411] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.004265] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.009640] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 23.437728] acer_wmi: Acer Laptop ACPI-WMI Extras [ 23.437767] acer_wmi: Function bitmap for Communication Button: 0x801 [ 23.445426] input: Acer WMI hotkeys as /devices/virtual/input/input9 [ 23.530758] ath: phy0: WB335 1-ANT card detected [ 23.538225] ath: phy0: Enable LNA combining [ 23.539332] ath: phy0: ASPM enabled: 0x42 [ 23.539337] ath: EEPROM regdomain: 0x65 [ 23.539338] ath: EEPROM indicates we should expect a direct regpair map [ 23.539342] ath: Country alpha2 being used: 00 [ 23.539342] ath: Regpair used: 0x65 [ 23.576902] Bluetooth: Core ver 2.22 [ 23.576945] NET: Registered protocol family 31 [ 23.576947] Bluetooth: HCI device and connection manager initialized [ 23.576954] Bluetooth: HCI socket layer initialized [ 23.576958] Bluetooth: L2CAP socket layer initialized [ 23.576970] Bluetooth: SCO socket layer initialized [ 23.626689] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 23.627631] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffff9d6a42880000, irq=36 [ 23.733782] usbcore: registered new interface driver btusb [ 24.140528] cryptd: max_cpu_qlen set to 1000 [ 24.394196] usb 4-2: USB disconnect, device number 2 [ 24.395165] usbcore: registered new interface driver ath3k [ 24.968147] usb 4-2: new full-speed USB device number 3 using ohci-pci [ 25.997040] usb 3-1: 1:1: cannot get freq at ep 0x1 [ 26.007042] usb 3-1: 1:2: cannot get freq at ep 0x1 [ 26.019040] usb 3-1: 2:1: cannot get freq at ep 0x82 [ 26.028545] usbcore: registered new interface driver snd-usb-audio [ 26.032062] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0 [ 26.227879] AVX version of gcm_enc/dec engaged. [ 26.227883] AES CTR mode by8 optimization enabled [ 26.856067] media: Linux media interface: v0.10 [ 26.876950] Linux video capture interface: v2.00 [ 26.891547] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 26.996253] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10 [ 27.000784] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 27.000794] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 27.000797] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 27.000799] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0 [ 27.000800] snd_hda_codec_realtek hdaudioC2D0: inputs: [ 27.000803] snd_hda_codec_realtek hdaudioC2D0: Mic=0x1b [ 27.014563] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card2/input11 [ 27.117507] audit: type=1400 audit(1565367783.564:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5145/usr/lib/snapd/snap-confine" pid=583 comm="apparmor_parser" [ 27.117517] audit: type=1400 audit(1565367783.564:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5145/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=583 comm="apparmor_parser" [ 27.229339] audit: type=1400 audit(1565367783.676:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=582 comm="apparmor_parser" [ 27.229348] audit: type=1400 audit(1565367783.676:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=582 comm="apparmor_parser" [ 27.229352] audit: type=1400 audit(1565367783.676:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=582 comm="apparmor_parser" [ 27.229356] audit: type=1400 audit(1565367783.676:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=582 comm="apparmor_parser" [ 27.268450] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336) [ 27.292265] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 27.292270] uvcvideo 2-1:1.0: Entity type for entity Extension 6 was not initialized! [ 27.292272] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 27.292424] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input12 [ 27.292577] usbcore: registered new interface driver uvcvideo [ 27.292578] USB Video Class driver (1.1.1) [ 27.503076] audit: type=1400 audit(1565367783.948:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=581 comm="apparmor_parser" [ 27.503085] audit: type=1400 audit(1565367783.948:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=581 comm="apparmor_parser" [ 27.505585] audit: type=1400 audit(1565367783.952:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=686 comm="apparmor_parser" [ 27.505593] audit: type=1400 audit(1565367783.952:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=686 comm="apparmor_parser" [ 27.909766] kvm: disabled by bios [ 27.953324] kvm: disabled by bios [ 27.993450] kvm: disabled by bios [ 28.029289] kvm: disabled by bios [ 28.159158] MCE: In-kernel MCE decoding enabled. [ 28.669475] EDAC amd64: Node 0: DRAM ECC disabled. [ 28.669479] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 28.708907] EDAC amd64: Node 0: DRAM ECC disabled. [ 28.708910] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 28.756912] EDAC amd64: Node 0: DRAM ECC disabled. [ 28.756916] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 28.801214] EDAC amd64: Node 0: DRAM ECC disabled. [ 28.801218] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 30.369058] usb 4-2: New USB device found, idVendor=04ca, idProduct=300b, bcdDevice= 0.02 [ 30.369063] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 34.363264] Adding 3929084k swap on /dev/sda5. Priority:-2 extents:1 across:3929084k FS [ 36.547866] zram: Added device: zram0 [ 36.548085] zram: Added device: zram1 [ 36.549243] zram: Added device: zram2 [ 36.550310] zram: Added device: zram3 [ 37.794665] zram0: detected capacity change from 0 to 444133376 [ 39.093789] Adding 433720k swap on /dev/zram0. Priority:5 extents:1 across:433720k SSFS [ 39.095082] zram1: detected capacity change from 0 to 444133376 [ 39.103286] Adding 433720k swap on /dev/zram1. Priority:5 extents:1 across:433720k SSFS [ 39.104621] zram2: detected capacity change from 0 to 444133376 [ 39.113312] Adding 433720k swap on /dev/zram2. Priority:5 extents:1 across:433720k SSFS [ 39.114775] zram3: detected capacity change from 0 to 444133376 [ 39.122901] Adding 433720k swap on /dev/zram3. Priority:5 extents:1 across:433720k SSFS [ 40.350306] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 40.350309] Bluetooth: BNEP filters: protocol multicast [ 40.350318] Bluetooth: BNEP socket layer initialized [ 42.534884] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 42.547561] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 42.557460] IPv6: ADDRCONF(NETDEV_UP): enp1s0f0: link is not ready [ 42.559923] IPv6: ADDRCONF(NETDEV_UP): enp1s0f0: link is not ready [ 43.683984] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 65.381624] wlp5s0: authenticate with 60:31:97:6b:1a:73 [ 65.398499] wlp5s0: send auth to 60:31:97:6b:1a:73 (try 1/3) [ 65.400954] wlp5s0: authenticated [ 65.404053] wlp5s0: associate with 60:31:97:6b:1a:73 (try 1/3) [ 65.415010] wlp5s0: RX AssocResp from 60:31:97:6b:1a:73 (capab=0x411 status=0 aid=5) [ 65.415151] wlp5s0: associated [ 65.609554] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready [ 321.358568] usb 3-1: USB disconnect, device number 2 [ 521.014969] wlp5s0: deauthenticating from 60:31:97:6b:1a:73 by local choice (Reason: 3=DEAUTH_LEAVING) [ 528.836152] wlp5s0: authenticate with 60:31:97:6b:1a:73 [ 528.848364] wlp5s0: send auth to 60:31:97:6b:1a:73 (try 1/3) [ 528.850362] wlp5s0: authenticated [ 528.855252] wlp5s0: associate with 60:31:97:6b:1a:73 (try 1/3) [ 528.858791] wlp5s0: RX AssocResp from 60:31:97:6b:1a:73 (capab=0x411 status=0 aid=5) [ 528.858930] wlp5s0: associated


///////////////////////////////////////////////////////////////////
AVEC ELLE

Copy to clipboard
lsmod Module Size Used by snd_usb_audio 200704 3 snd_usbmidi_lib 32768 1 snd_usb_audio snd_hda_intel 40960 0 snd_hrtimer 16384 0 snd_seq_dummy 16384 0 snd_seq_midi 16384 0 snd_seq_midi_event 16384 1 snd_seq_midi snd_rawmidi 32768 2 snd_seq_midi,snd_usbmidi_lib snd_seq 65536 3 snd_seq_midi,snd_seq_midi_event,snd_seq_dummy snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi ccm 20480 6 bnep 20480 2 zram 24576 4 amd_freq_sensitivity 16384 0 edac_mce_amd 28672 0 ccp 81920 0 kvm 618496 0 irqbypass 16384 1 kvm uvcvideo 94208 0 videobuf2_vmalloc 16384 1 uvcvideo crct10dif_pclmul 16384 0 videobuf2_memops 16384 1 videobuf2_vmalloc crc32_pclmul 16384 0 videobuf2_v4l2 24576 1 uvcvideo snd_hda_codec_realtek 102400 1 snd_hda_codec_hdmi 49152 1 snd_hda_codec_generic 73728 1 snd_hda_codec_realtek videobuf2_common 40960 2 videobuf2_v4l2,uvcvideo ghash_clmulni_intel 16384 0 videodev 184320 3 videobuf2_v4l2,uvcvideo,videobuf2_common media 40960 2 videodev,uvcvideo snd_hda_codec 126976 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek pcbc 16384 0 aesni_intel 200704 4 snd_hda_core 81920 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek snd_hwdep 20480 2 snd_usb_audio,snd_hda_codec aes_x86_64 20480 1 aesni_intel crypto_simd 16384 1 aesni_intel snd_pcm 98304 7 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_hda_core cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel glue_helper 16384 1 aesni_intel joydev 20480 0 ath3k 20480 0 input_leds 16384 0 serio_raw 16384 0 btusb 45056 0 btrtl 16384 1 btusb btbcm 16384 1 btusb btintel 20480 1 btusb arc4 16384 2 bluetooth 544768 27 btrtl,btintel,btbcm,bnep,ath3k,btusb ath9k 151552 0 ecdh_generic 24576 1 bluetooth acer_wmi 20480 0 snd_timer 32768 3 snd_seq,snd_hrtimer,snd_pcm sparse_keymap 16384 1 acer_wmi ath9k_common 36864 1 ath9k ath9k_hw 475136 2 ath9k_common,ath9k ath 28672 3 ath9k_common,ath9k,ath9k_hw snd 81920 17 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi wmi_bmof 16384 0 mac80211 798720 1 ath9k cfg80211 659456 4 ath9k_common,ath9k,ath,mac80211 soundcore 16384 1 snd fam15h_power 16384 0 k10temp 16384 0 shpchp 36864 0 i2c_piix4 24576 0 mac_hid 16384 0 binfmt_misc 20480 1 parport_pc 36864 0 ppdev 20480 0 lp 20480 0 parport 49152 3 parport_pc,lp,ppdev autofs4 40960 2 amdgpu 2699264 0 chash 16384 1 amdgpu gpu_sched 24576 1 amdgpu hid_generic 16384 0 usbhid 49152 0 hid 122880 2 usbhid,hid_generic radeon 1454080 54 i2c_algo_bit 16384 2 amdgpu,radeon ttm 110592 2 amdgpu,radeon drm_kms_helper 172032 2 amdgpu,radeon syscopyarea 16384 1 drm_kms_helper sysfillrect 16384 1 drm_kms_helper sysimgblt 16384 1 drm_kms_helper fb_sys_fops 16384 1 drm_kms_helper sdhci_pci 36864 0 psmouse 147456 0 drm 405504 10 gpu_sched,drm_kms_helper,amdgpu,radeon,ttm alx 45056 0 ahci 36864 2 cqhci 24576 1 sdhci_pci mdio 16384 1 alx libahci 32768 1 ahci sdhci 49152 1 sdhci_pci wmi 24576 2 acer_wmi,wmi_bmof video 45056 1 acer_wmi



Copy to clipboard
sudo dmesg [ 0.000000] Linux version 4.17.5-041705-generic (kernel@kathleen) (gcc version 7.3.0 (Ubuntu 7.3.0-24ubuntu1)) #201807081431 SMP Sun Jul 8 14:33:41 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.17.5-041705-generic root=UUID=ad77c70a-ee3f-4db4-b07e-f8a1c59c61e8 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b4b1efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b4b1f000-0x00000000b531ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b5320000-0x00000000b537bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b537c000-0x00000000b677bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b677c000-0x00000000bf77efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf77f000-0x00000000bf97efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf97f000-0x00000000bfb7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfb7f000-0x00000000bfbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire E1-522/Aspire E1-522, BIOS V2.02 05/03/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00BFB67000 mask FFFFFFF000 uncachable [ 0.000000] 3 base 00FFC00000 mask FFFFC00000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000011f000000 aka 4592M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xbfc00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x11a94a000, 0x11a94afff] PGTABLE [ 0.000000] BRK [0x11a94b000, 0x11a94bfff] PGTABLE [ 0.000000] BRK [0x11a94c000, 0x11a94cfff] PGTABLE [ 0.000000] BRK [0x11a94d000, 0x11a94dfff] PGTABLE [ 0.000000] BRK [0x11a94e000, 0x11a94efff] PGTABLE [ 0.000000] BRK [0x11a94f000, 0x11a94ffff] PGTABLE [ 0.000000] BRK [0x11a950000, 0x11a950fff] PGTABLE [ 0.000000] BRK [0x11a951000, 0x11a951fff] PGTABLE [ 0.000000] BRK [0x11a952000, 0x11a952fff] PGTABLE [ 0.000000] BRK [0x11a953000, 0x11a953fff] PGTABLE [ 0.000000] BRK [0x11a954000, 0x11a954fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31a14000-0x34d01fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x00000000BFBFE120 0000A4 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000BFBFC000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 0x00000000BFBEE000 009FCD (v01 ACRSYS ACRPRDCT F0000000 1025 00040000) [ 0.000000] ACPI: FACS 0x00000000BFB26000 000040 [ 0.000000] ACPI: UEFI 0x00000000BFBFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0x00000000BFBFB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 0x00000000BFBFA000 000090 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0x00000000BFBF9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASF! 0x00000000BFBF8000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: BOOT 0x00000000BFBED000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: WDRT 0x00000000BFBEC000 000047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: WDAT 0x00000000BFBEB000 0001AC (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: FPDT 0x00000000BFBEA000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MSDM 0x00000000BFBE8000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBE7000 000CB4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBE0000 006352 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBDE000 0013CA (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBDD000 000D61 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBDB000 0010C2 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11efd5000-0x11effffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b4b1efff] [ 0.000000] node 0: [mem 0x00000000b5320000-0x00000000b537bfff] [ 0.000000] node 0: [mem 0x00000000b677c000-0x00000000bf77efff] [ 0.000000] node 0: [mem 0x00000000bfbff000-0x00000000bfbfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] [ 0.000000] On node 0 totalpages: 903965 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12078 pages used for memmap [ 0.000000] DMA32 zone: 772991 pages, LIFO batch:31 [ 0.000000] Normal zone: 1984 pages used for memmap [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 9443 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb4b1f000-0xb531ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb537c000-0xb677bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf77f000-0xbf97efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf97f000-0xbfb7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfb7f000-0xbfbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfc00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 889818 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.17.5-041705-generic root=UUID=ad77c70a-ee3f-4db4-b07e-f8a1c59c61e8 ro quiet splash vt.handoff=7 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3411368K/3615860K available (12300K kernel code, 2520K rwdata, 4344K rodata, 2432K init, 2384K bss, 204492K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 40400 entries in 158 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180313 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 1996.342 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x398d5e21404, max_idle_ns: 881590739801 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.68 BogoMIPS (lpj=7985368) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] CPU: Physical Processor ID: 0 [ 0.024000] CPU: Processor Core ID: 0 [ 0.024000] mce: CPU supports 6 MCE banks [ 0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.024000] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 [ 0.024000] Spectre V2 : Mitigation: Full AMD retpoline [ 0.024000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch [ 0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.024000] Freeing SMP alternatives memory: 36K [ 0.036000] smpboot: CPU0: AMD A6-5200 APU with Radeon(TM) HD Graphics (family: 0x16, model: 0x0, stepping: 0x1) [ 0.036000] Performance Events: AMD PMU driver. [ 0.036000] ... version: 0 [ 0.036000] ... bit width: 48 [ 0.036000] ... generic registers: 4 [ 0.036000] ... value mask: 0000ffffffffffff [ 0.036000] ... max period: 00007fffffffffff [ 0.036000] ... fixed-purpose events: 0 [ 0.036000] ... event mask: 000000000000000f [ 0.036000] Hierarchical SRCU implementation. [ 0.036000] smp: Bringing up secondary CPUs ... [ 0.036000] x86: Booting SMP configuration: [ 0.036000] .... node #0, CPUs: #1 [ 0.004000] do_IRQ: 1.55 No irq handler for vector [ 0.036097] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.036278] #2 [ 0.004000] do_IRQ: 2.55 No irq handler for vector [ 0.040287] #3 [ 0.004000] do_IRQ: 3.55 No irq handler for vector [ 0.044056] smp: Brought up 1 node, 4 CPUs [ 0.044056] smpboot: Max logical packages: 1 [ 0.044056] smpboot: Total of 4 processors activated (15970.73 BogoMIPS) [ 0.044741] devtmpfs: initialized [ 0.044741] x86/mm: Memory block size: 128MB [ 0.044941] evm: security.selinux [ 0.044943] evm: security.SMACK64 [ 0.044943] evm: security.SMACK64EXEC [ 0.044944] evm: security.SMACK64TRANSMUTE [ 0.044945] evm: security.SMACK64MMAP [ 0.044946] evm: security.apparmor [ 0.044947] evm: security.ima [ 0.044947] evm: security.capability [ 0.044974] PM: Registering ACPI NVS region [mem 0xbf97f000-0xbfb7efff] (2097152 bytes) [ 0.044974] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.044974] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.044974] pinctrl core: initialized pinctrl subsystem [ 0.044974] RTC time: 16:22:35, date: 08/09/19 [ 0.044974] NET: Registered protocol family 16 [ 0.044974] audit: initializing netlink subsys (disabled) [ 0.044974] audit: type=2000 audit(1565367755.044:1): state=initialized audit_enabled=0 res=1 [ 0.048024] cpuidle: using governor ladder [ 0.048031] cpuidle: using governor menu [ 0.048055] Simple Boot Flag at 0x44 set to 0x1 [ 0.048079] ACPI: bus type PCI registered [ 0.048081] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.048203] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.048213] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.048213] PCI: Using configuration type 1 for base access [ 0.048345] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.048346] mtrr: probably your BIOS does not setup all CPUs. [ 0.048346] mtrr: corrected configuration. [ 0.050221] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.050221] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.052175] ACPI: Added _OSI(Module Device) [ 0.052177] ACPI: Added _OSI(Processor Device) [ 0.052178] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052180] ACPI: Added _OSI(Processor Aggregator Device) [ 0.052182] ACPI: Added _OSI(Linux-Dell-Video) [ 0.085299] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.094602] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.103636] ACPI: EC: EC started [ 0.103637] ACPI: EC: interrupt blocked [ 0.116141] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC [ 0.116145] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.116149] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions [ 0.116150] ACPI: Interpreter enabled [ 0.116190] ACPI: (supports S0 S3 S4 S5) [ 0.116193] ACPI: Using IOAPIC for interrupt routing [ 0.116793] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.117836] ACPI: Enabled 3 GPEs in block 00 to 1F [ 0.136464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.136476] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.137060] acpi PNP0A08:00: _OSC: platform does not support [PME] [ 0.137620] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability] [ 0.137651] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.137920] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff]) [ 0.138332] PCI host bridge to bus 0000:00 [ 0.138336] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.138339] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.138341] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.138344] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.138346] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.138349] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.138351] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.138354] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.138356] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.138359] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.138361] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.138363] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.138366] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.138368] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.138371] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.138373] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window] [ 0.138376] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window] [ 0.138378] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.138392] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000 [ 0.138592] pci 0000:00:01.0: [1002:9830] type 00 class 0x030000 [ 0.138615] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.138626] pci 0000:00:01.0: reg 0x18: [mem 0xf0800000-0xf0ffffff 64bit pref] [ 0.138634] pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff] [ 0.138642] pci 0000:00:01.0: reg 0x24: [mem 0xf0200000-0xf023ffff] [ 0.138650] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.138655] pci 0000:00:01.0: enabling Extended Tags [ 0.138703] pci 0000:00:01.0: supports D1 D2 [ 0.138706] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.138890] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 [ 0.138911] pci 0000:00:01.1: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit] [ 0.138942] pci 0000:00:01.1: enabling Extended Tags [ 0.138986] pci 0000:00:01.1: supports D1 D2 [ 0.139143] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000 [ 0.139334] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400 [ 0.139375] pci 0000:00:02.2: enabling Extended Tags [ 0.139425] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.139609] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400 [ 0.139650] pci 0000:00:02.3: enabling Extended Tags [ 0.139700] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold [ 0.139906] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330 [ 0.139934] pci 0000:00:10.0: reg 0x10: [mem 0xf0248000-0xf0249fff 64bit] [ 0.140042] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.140234] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 [ 0.140256] pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f] [ 0.140265] pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127] [ 0.140273] pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117] [ 0.140282] pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123] [ 0.140291] pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f] [ 0.140300] pci 0000:00:11.0: reg 0x24: [mem 0xf024e000-0xf024e3ff] [ 0.140352] pci 0000:00:11.0: PME# supported from D3hot [ 0.140675] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.140693] pci 0000:00:12.0: reg 0x10: [mem 0xf024d000-0xf024dfff] [ 0.140911] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.140931] pci 0000:00:12.2: reg 0x10: [mem 0xf024c000-0xf024c0ff] [ 0.141004] pci 0000:00:12.2: supports D1 D2 [ 0.141007] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141174] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 0.141192] pci 0000:00:13.0: reg 0x10: [mem 0xf024b000-0xf024bfff] [ 0.141412] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 0.141432] pci 0000:00:13.2: reg 0x10: [mem 0xf024a000-0xf024a0ff] [ 0.141505] pci 0000:00:13.2: supports D1 D2 [ 0.141508] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141676] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.141895] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.141919] pci 0000:00:14.2: reg 0x10: [mem 0xf0244000-0xf0247fff 64bit] [ 0.141988] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.142149] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.142372] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000 [ 0.142535] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000 [ 0.142693] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000 [ 0.142851] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000 [ 0.143017] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000 [ 0.143174] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000 [ 0.143441] pci 0000:01:00.0: [1969:10a1] type 00 class 0x020000 [ 0.143476] pci 0000:01:00.0: reg 0x10: [mem 0xf1000000-0xf103ffff 64bit] [ 0.143488] pci 0000:01:00.0: reg 0x18: [io 0x2000-0x207f] [ 0.143608] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.143743] pci 0000:01:00.1: [1969:3010] type 00 class 0x080501 [ 0.143778] pci 0000:01:00.1: reg 0x10: [mem 0xf1040000-0xf10400ff 64bit] [ 0.143901] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.156124] pci 0000:00:02.2: PCI bridge to [bus 01-04] [ 0.156133] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff] [ 0.156139] pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff] [ 0.156145] pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.156328] pci 0000:05:00.0: [168c:0036] type 00 class 0x028000 [ 0.156365] pci 0000:05:00.0: reg 0x10: [mem 0xf0100000-0xf017ffff 64bit] [ 0.156415] pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.156507] pci 0000:05:00.0: supports D1 D2 [ 0.156510] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168112] pci 0000:00:02.3: PCI bridge to [bus 05] [ 0.168125] pci 0000:00:02.3: bridge window [mem 0xf0100000-0xf01fffff] [ 0.170480] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.170704] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.170935] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.171168] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.171364] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.171508] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.171652] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.171796] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.172395] ACPI: EC: interrupt unblocked [ 0.172412] ACPI: EC: event unblocked [ 0.172422] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.172425] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.172572] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.172572] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.172572] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.172572] vgaarb: loaded [ 0.172572] SCSI subsystem initialized [ 0.172572] libata version 3.00 loaded. [ 0.172572] ACPI: bus type USB registered [ 0.172572] usbcore: registered new interface driver usbfs [ 0.172572] usbcore: registered new interface driver hub [ 0.172572] usbcore: registered new device driver usb [ 0.172572] pps_core: LinuxPPS API ver. 1 registered [ 0.172572] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.172572] PTP clock support registered [ 0.172572] EDAC MC: Ver: 3.0.0 [ 0.172572] PCI: Using ACPI for IRQ routing [ 0.173845] PCI: pci_cache_line_size set to 64 bytes [ 0.173913] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.173916] e820: reserve RAM buffer [mem 0xb4b1f000-0xb7ffffff] [ 0.173918] e820: reserve RAM buffer [mem 0xb537c000-0xb7ffffff] [ 0.173919] e820: reserve RAM buffer [mem 0xbf77f000-0xbfffffff] [ 0.173921] e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff] [ 0.173923] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] [ 0.174129] NetLabel: Initializing [ 0.174130] NetLabel: domain hash size = 128 [ 0.174131] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.174159] NetLabel: unlabeled traffic allowed by default [ 0.174190] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.174190] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.177077] clocksource: Switched to clocksource tsc-early [ 0.202003] VFS: Disk quotas dquot_6.6.0 [ 0.202035] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.202261] AppArmor: AppArmor Filesystem Enabled [ 0.202326] pnp: PnP ACPI init [ 0.202775] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved [ 0.202779] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.202789] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.203126] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.203228] system 00:02: [io 0x0400-0x04cf] has been reserved [ 0.203231] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.203239] system 00:02: [io 0x04d6] has been reserved [ 0.203242] system 00:02: [io 0x0680-0x06ff] has been reserved [ 0.203245] system 00:02: [io 0x077a] has been reserved [ 0.203247] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.203250] system 00:02: [io 0x0c14] has been reserved [ 0.203252] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.203255] system 00:02: [io 0x0c6c] has been reserved [ 0.203257] system 00:02: [io 0x0c6f] has been reserved [ 0.203260] system 00:02: [io 0x0cd0-0x0cdb] could not be reserved [ 0.203263] system 00:02: [io 0x0840-0x0847] has been reserved [ 0.203271] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.203447] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.203451] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.203458] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.203642] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.203743] pnp 00:05: Plug and Play ACPI device, IDs ETD0509 PNP0f13 (active) [ 0.205102] pnp: PnP ACPI: found 6 devices [ 0.212984] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.212996] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with Reserved [mem 0xffc00000-0xffffffff] [ 0.213000] pci 0000:05:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.213038] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0260000-0xf027ffff pref] [ 0.213044] pci 0000:00:02.2: PCI bridge to [bus 01-04] [ 0.213048] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff] [ 0.213053] pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff] [ 0.213057] pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.213065] pci 0000:05:00.0: BAR 6: assigned [mem 0xf0180000-0xf018ffff pref] [ 0.213067] pci 0000:00:02.3: PCI bridge to [bus 05] [ 0.213073] pci 0000:00:02.3: bridge window [mem 0xf0100000-0xf01fffff] [ 0.213084] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.213086] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.213089] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.213091] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.213094] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.213096] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.213098] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] [ 0.213101] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] [ 0.213103] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] [ 0.213105] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] [ 0.213108] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] [ 0.213110] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] [ 0.213112] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] [ 0.213115] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] [ 0.213117] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window] [ 0.213119] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window] [ 0.213122] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window] [ 0.213124] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.213126] pci_bus 0000:01: resource 1 [mem 0xf1000000-0xf1ffffff] [ 0.213129] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.213131] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff] [ 0.213311] NET: Registered protocol family 2 [ 0.213688] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) [ 0.213724] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.213859] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.214032] TCP: Hash tables configured (established 32768 bind 32768) [ 0.214110] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.214140] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.214232] NET: Registered protocol family 1 [ 0.214261] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.214270] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0 [ 0.298711] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c0 took 75473 usecs [ 0.298989] pci 0000:00:12.2: PME# does not work under D3, disabling it [ 0.378707] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c0 took 77828 usecs [ 0.378987] pci 0000:00:13.2: PME# does not work under D3, disabling it [ 0.379022] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag [ 0.379035] PCI: CLS 64 bytes, default 64 [ 0.379133] Unpacking initramfs... [ 1.677836] Freeing initrd memory: 52152K [ 1.677975] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.677980] software IO TLB [mem 0xbb77f000-0xbf77f000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 1.678083] amd_uncore: AMD NB counters detected [ 1.678155] amd_uncore: AMD LLC counters detected [ 1.678347] LVT offset 0 assigned for vector 0x400 [ 1.678406] perf: AMD IBS detected (0x000000ff) [ 1.678513] Scanning for low memory corruption every 60 seconds [ 1.679842] Initialise system trusted keyrings [ 1.679860] Key type blacklist registered [ 1.679921] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.682905] zbud: loaded [ 1.683738] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.684134] fuse init (API version 7.26) [ 1.684266] pstore: using deflate compression [ 1.686687] Key type asymmetric registered [ 1.686689] Asymmetric key parser 'x509' registered [ 1.686748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.686811] io scheduler noop registered [ 1.686813] io scheduler deadline registered [ 1.686901] io scheduler cfq registered (default) [ 1.687759] vesafb: mode is 1366x768x32, linelength=5632, pages=0 [ 1.687760] vesafb: scrolling: redraw [ 1.687763] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.687787] vesafb: framebuffer at 0xe0000000, mapped to 0x (ptrval), using 4224k, total 4224k [ 1.759435] Console: switching to colour frame buffer device 170x48 [ 1.830729] fb0: VESA VGA frame buffer device [ 1.831382] ACPI: AC Adapter [ADP1] (on-line) [ 1.831472] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.831493] ACPI: Power Button [PWRB] [ 1.831572] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.831592] ACPI: Lid Switch [LID0] [ 1.831658] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.831672] ACPI: Sleep Button [SLPB] [ 1.831737] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.831750] ACPI: Power Button [PWRF] [ 1.836460] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.836462] ACPI: Thermal Zone [TZS0] (60 C) [ 1.837167] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.837169] ACPI: Thermal Zone [TZS1] (37 C) [ 1.837410] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.838786] ACPI: Battery Slot [BAT0] (battery present) [ 1.841261] Linux agpgart interface v0.103 [ 1.844695] loop: module loaded [ 1.845468] libphy: Fixed MDIO Bus: probed [ 1.845470] tun: Universal TUN/TAP device driver, 1.6 [ 1.845561] PPP generic driver version 2.4.2 [ 1.845645] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.845660] ehci-pci: EHCI PCI platform driver [ 1.845975] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.845986] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.845994] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.846004] ehci-pci 0000:00:12.2: debug port 1 [ 1.846069] ehci-pci 0000:00:12.2: irq 17, io mem 0xf024c000 [ 1.860203] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.860316] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 1.860319] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.860322] usb usb1: Product: EHCI Host Controller [ 1.860324] usb usb1: Manufacturer: Linux 4.17.5-041705-generic ehci_hcd [ 1.860326] usb usb1: SerialNumber: 0000:00:12.2 [ 1.860598] hub 1-0:1.0: USB hub found [ 1.860612] hub 1-0:1.0: 4 ports detected [ 1.861099] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.861109] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.861115] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.861126] ehci-pci 0000:00:13.2: debug port 1 [ 1.861166] ehci-pci 0000:00:13.2: irq 17, io mem 0xf024a000 [ 1.876182] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.876305] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 1.876308] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.876310] usb usb2: Product: EHCI Host Controller [ 1.876313] usb usb2: Manufacturer: Linux 4.17.5-041705-generic ehci_hcd [ 1.876315] usb usb2: SerialNumber: 0000:00:13.2 [ 1.876630] hub 2-0:1.0: USB hub found [ 1.876644] hub 2-0:1.0: 4 ports detected [ 1.876967] ehci-platform: EHCI generic platform driver [ 1.877004] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.877009] ohci-pci: OHCI PCI platform driver [ 1.877273] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.877286] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.877334] ohci-pci 0000:00:12.0: irq 18, io mem 0xf024d000 [ 1.940271] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17 [ 1.940276] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.940278] usb usb3: Product: OHCI PCI host controller [ 1.940281] usb usb3: Manufacturer: Linux 4.17.5-041705-generic ohci_hcd [ 1.940283] usb usb3: SerialNumber: 0000:00:12.0 [ 1.940581] hub 3-0:1.0: USB hub found [ 1.940596] hub 3-0:1.0: 4 ports detected [ 1.941074] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.941085] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 1.941127] ohci-pci 0000:00:13.0: irq 18, io mem 0xf024b000 [ 2.004264] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17 [ 2.004269] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.004271] usb usb4: Product: OHCI PCI host controller [ 2.004274] usb usb4: Manufacturer: Linux 4.17.5-041705-generic ohci_hcd [ 2.004276] usb usb4: SerialNumber: 0000:00:13.0 [ 2.004651] hub 4-0:1.0: USB hub found [ 2.004666] hub 4-0:1.0: 4 ports detected [ 2.004995] ohci-platform: OHCI generic platform driver [ 2.005025] uhci_hcd: USB Universal Host Controller Interface driver [ 2.005320] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.005330] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 2.005506] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410 [ 2.005868] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 2.005871] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.005873] usb usb5: Product: xHCI Host Controller [ 2.005875] usb usb5: Manufacturer: Linux 4.17.5-041705-generic xhci-hcd [ 2.005877] usb usb5: SerialNumber: 0000:00:10.0 [ 2.006061] hub 5-0:1.0: USB hub found [ 2.006074] hub 5-0:1.0: 2 ports detected [ 2.006237] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.006243] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 [ 2.006249] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed [ 2.008911] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.008951] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17 [ 2.008954] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.008956] usb usb6: Product: xHCI Host Controller [ 2.008958] usb usb6: Manufacturer: Linux 4.17.5-041705-generic xhci-hcd [ 2.008960] usb usb6: SerialNumber: 0000:00:10.0 [ 2.009142] hub 6-0:1.0: USB hub found [ 2.009155] hub 6-0:1.0: 2 ports detected [ 2.009385] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.017635] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.017643] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.017922] mousedev: PS/2 mouse device common for all mice [ 2.018285] rtc_cmos 00:01: RTC can wake from S4 [ 2.018435] rtc_cmos 00:01: registered as rtc0 [ 2.018466] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.018478] i2c /dev entries driver [ 2.018589] device-mapper: uevent: version 1.0.3 [ 2.018705] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 2.018808] ledtrig-cpu: registered to indicate activity on CPUs [ 2.019495] NET: Registered protocol family 10 [ 2.026584] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.028475] Segment Routing with IPv6 [ 2.028517] NET: Registered protocol family 17 [ 2.028586] Key type dns_resolver registered [ 2.029000] RAS: Correctable Errors collector initialized. [ 2.029007] microcode: microcode updated early to new patch_level=0x0700010f [ 2.029069] microcode: CPU0: patch_level=0x0700010f [ 2.029076] microcode: CPU1: patch_level=0x0700010f [ 2.029086] microcode: CPU2: patch_level=0x0700010f [ 2.029112] microcode: CPU3: patch_level=0x0700010f [ 2.029173] microcode: Microcode Update Driver: v2.2. [ 2.029192] sched_clock: Marking stable (2029165543, 0)->(3122660452, -1093494909) [ 2.029588] registered taskstats version 1 [ 2.029608] Loading compiled-in X.509 certificates [ 2.035534] Loaded X.509 cert 'Build time autogenerated kernel key: 8526455a0f05256cf46d4be52827255c2c71a657' [ 2.035585] zswap: loaded using pool lzo/zbud [ 2.043815] Key type big_key registered [ 2.043824] Key type trusted registered [ 2.047816] Key type encrypted registered [ 2.047822] AppArmor: AppArmor sha1 policy hashing enabled [ 2.047829] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.047837] ima: Allocated hash algorithm: sha1 [ 2.047873] evm: HMAC attrs: 0x1 [ 2.048708] Magic number: 15:208:388 [ 2.048729] usb usb6: hash matches [ 2.048773] thermal cooling_device3: hash matches [ 2.048931] rtc_cmos 00:01: setting system clock to 2019-08-09 16:22:38 UTC (1565367758) [ 2.049195] acpi_cpufreq: overriding BIOS provided _PSD data [ 2.054722] Freeing unused kernel memory: 2432K [ 2.084191] Write protecting the kernel read-only data: 20480k [ 2.085280] Freeing unused kernel memory: 2008K [ 2.094300] Freeing unused kernel memory: 1800K [ 2.117158] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.135362] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.135535] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.135560] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.216037] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.227648] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2.228550] acpi device:00: registered as cooling_device4 [ 2.228671] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 2.247493] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 2.272950] sdhci: Secure Digital Host Controller Interface driver [ 2.272953] sdhci: Copyright(c) Pierre Ossman [ 2.276458] ahci 0000:00:11.0: version 3.0 [ 2.277290] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.277295] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part [ 2.289594] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [30:65:ec:05:86:72] [ 2.289664] sdhci-pci 0000:01:00.1: SDHCI controller found [1969:3010] (rev 13) [ 2.290685] mmc0: SDHCI controller on PCI [0000:01:00.1] using ADMA [ 2.294385] scsi host0: ahci [ 2.294788] scsi host1: ahci [ 2.294877] ata1: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e100 irq 31 [ 2.294881] ata2: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e180 irq 31 [ 2.327829] alx 0000:01:00.0 enp1s0f0: renamed from eth0 [ 2.340051] usb 5-1: new low-speed USB device number 2 using xhci_hcd [ 2.362410] [drm] radeon kernel modesetting enabled. [ 2.362495] checking generic (e0000000 420000) vs hw (e0000000 10000000) [ 2.362496] fb: switching to radeondrmfb from VESA VGA [ 2.362543] Console: switching to colour dummy device 80x25 [ 2.363216] [drm] initializing kernel modesetting (KABINI 0x1002:0x9830 0x1025:0x076B 0x00). [ 2.363245] [drm] doorbell mmio base: 0xF0800000 [ 2.363247] [drm] doorbell mmio size: 8388608 [ 2.363274] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window] [ 2.363283] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs [ 2.364675] ATOM BIOS: AMD [ 2.364744] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 2.364747] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF [ 2.364755] [drm] Detected VRAM RAM=512M, BAR=256M [ 2.364756] [drm] RAM width 128bits DDR [ 2.364861] [TTM] Zone kernel: Available graphics memory: 1734898 kiB [ 2.364863] [TTM] Initializing pool allocator [ 2.364871] [TTM] Initializing DMA pool allocator [ 2.364906] [drm] radeon: 512M of VRAM memory ready [ 2.364908] [drm] radeon: 2048M of GTT memory ready. [ 2.364922] [drm] Loading kabini Microcode [ 2.365129] [drm] Internal thermal controller without fan control [ 2.365624] [drm] radeon: dpm initialized [ 2.365800] [drm] Found UVD firmware Version: 1.55 Family ID: 9 [ 2.367877] [drm] Found VCE firmware/feedback version 40.2.2 / 15! [ 2.367891] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 2.408074] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000). [ 2.408291] radeon 0000:00:01.0: WB enabled [ 2.408312] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x (ptrval) [ 2.408315] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x (ptrval) [ 2.408318] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x (ptrval) [ 2.408321] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x (ptrval) [ 2.408323] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x (ptrval) [ 2.409203] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x00000000000782b0 and cpu addr 0x (ptrval) [ 2.409536] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x (ptrval) [ 2.409538] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x (ptrval) [ 2.409543] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.409544] [drm] Driver supports precise vblank timestamp query. [ 2.409622] radeon 0000:00:01.0: radeon: using MSI. [ 2.409661] [drm] radeon: irq initialized. [ 2.412482] [drm] ring test on 0 succeeded in 3 usecs [ 2.412559] [drm] ring test on 1 succeeded in 3 usecs [ 2.412578] [drm] ring test on 2 succeeded in 3 usecs [ 2.412791] [drm] ring test on 3 succeeded in 4 usecs [ 2.412799] [drm] ring test on 4 succeeded in 4 usecs [ 2.458527] [drm] ring test on 5 succeeded in 1 usecs [ 2.478400] [drm] UVD initialized successfully. [ 2.478425] usb 2-1: New USB device found, idVendor=04f2, idProduct=b336, bcdDevice=13.08 [ 2.478428] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.478430] usb 2-1: Product: HD WebCam [ 2.478433] usb 2-1: Manufacturer: HD WebCam [ 2.517961] usb 5-1: New USB device found, idVendor=0461, idProduct=4d22, bcdDevice= 2.00 [ 2.517964] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.517966] usb 5-1: Product: USB Optical Mouse [ 2.520021] usb 3-1: new full-speed USB device number 2 using ohci-pci [ 2.529832] hidraw: raw HID events driver (C) Jiri Kosina [ 2.544260] usbcore: registered new interface driver usbhid [ 2.544261] usbhid: USB HID core driver [ 2.547470] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.0/0003:0461:4D22.0001/input/input8 [ 2.547647] hid-generic 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:10.0-1/input0 [ 2.587648] [drm] ring test on 6 succeeded in 16 usecs [ 2.587662] [drm] ring test on 7 succeeded in 4 usecs [ 2.587663] [drm] VCE initialized successfully. [ 2.588741] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.588901] [drm] ib test on ring 1 succeeded in 0 usecs [ 2.589057] [drm] ib test on ring 2 succeeded in 0 usecs [ 2.589216] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.589371] [drm] ib test on ring 4 succeeded in 0 usecs [ 2.609418] [drm] ib test on ring 5 succeeded [ 2.630101] [drm] ib test on ring 6 succeeded [ 2.630801] [drm] ib test on ring 7 succeeded [ 2.635097] [drm] radeon atom DIG backlight initialized [ 2.635100] [drm] Radeon Display Connectors [ 2.635101] [drm] Connector 0: [ 2.635102] [drm] eDP-1 [ 2.635103] [drm] HPD1 [ 2.635105] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 2.635106] [drm] Encoders: [ 2.635107] [drm] LCD1: INTERNAL_UNIPHY [ 2.635108] [drm] Connector 1: [ 2.635108] [drm] HDMI-A-1 [ 2.635109] [drm] HPD2 [ 2.635111] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 2.635112] [drm] Encoders: [ 2.635112] [drm] DFP1: INTERNAL_UNIPHY [ 2.635113] [drm] Connector 2: [ 2.635114] [drm] VGA-1 [ 2.635116] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc [ 2.635117] [drm] Encoders: [ 2.635118] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.719081] usb 3-1: config 1 has an invalid interface number: 4 but max is 3 [ 2.719086] usb 3-1: config 1 has no interface number 3 [ 2.727056] usb 3-1: New USB device found, idVendor=1210, idProduct=000a, bcdDevice= 0.01 [ 2.727059] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.727061] usb 3-1: Product: Lexicon Alpha [ 2.727064] usb 3-1: Manufacturer: Lexicon [ 2.772053] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.772079] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.773549] ata2.00: ATAPI: MATSHITADVD-RAM UJ8D2Q, 1.10, max UDMA/133 [ 2.774670] ata2.00: configured for UDMA/133 [ 2.798488] ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133 [ 2.798491] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.837328] ata1.00: configured for UDMA/133 [ 2.837633] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 SDM1 PQ: 0 ANSI: 5 [ 2.838028] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.838034] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.838037] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.838061] sd 0:0:0:0: [sda] Write Protect is off [ 2.838064] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.838113] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.839502] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8D2Q 1.10 PQ: 0 ANSI: 5 [ 2.876376] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x254f00) [ 2.890857] psmouse serio1: elantech: Synaptics capabilities query result 0x69, 0x16, 0x0c. [ 2.905349] psmouse serio1: elantech: Elan sample query result 02, 65, 75 [ 2.926173] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 2.927058] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.932040] usb 4-2: new full-speed USB device number 2 using ohci-pci [ 2.986412] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7 [ 3.121047] usb 4-2: New USB device found, idVendor=04ca, idProduct=300b, bcdDevice= 0.01 [ 3.121051] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.717670] tsc: Refined TSC clocksource calibration: 1996.255 MHz [ 3.717685] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398cb85cd06, max_idle_ns: 881590416994 ns [ 3.717709] clocksource: Switched to clocksource tsc [ 3.738269] [drm] fb mappable at 0xE0722000 [ 3.738271] [drm] vram apper at 0xE0000000 [ 3.738273] [drm] size 4325376 [ 3.738275] [drm] fb depth is 24 [ 3.738276] [drm] pitch is 5632 [ 3.738456] fbcon: radeondrmfb (fb0) is primary device [ 5.870697] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.870701] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.871032] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.871181] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.929064] Console: switching to colour frame buffer device 170x48 [ 5.934286] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 5.959614] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 [ 6.029835] [drm] amdgpu kernel modesetting enabled. [ 6.039401] random: fast init done [ 12.188466] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) [ 13.033026] random: crng init done [ 13.033031] random: 7 urandom warning(s) missed due to ratelimiting [ 13.941962] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 13.960456] systemd[1]: Detected architecture x86-64. [ 13.961074] systemd[1]: Set hostname to <raskol-K50AB>. [ 16.433538] systemd[1]: Listening on udev Control Socket. [ 16.433751] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 16.433809] systemd[1]: Listening on Syslog Socket. [ 16.433827] systemd[1]: Reached target Remote File Systems (Pre). [ 16.434025] systemd[1]: Created slice User and Session Slice. [ 16.434094] systemd[1]: Listening on Journal Socket. [ 16.434158] systemd[1]: Listening on Journal Socket (/dev/log). [ 17.270721] lp: driver loaded but no devices found [ 17.303968] ppdev: user-space parallel port driver [ 17.629255] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro [ 18.590705] systemd-journald[271]: Received request to flush runtime journal from PID 1 [ 22.144571] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 22.144575] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ 22.146008] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 22.577411] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.004265] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.009640] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 23.437728] acer_wmi: Acer Laptop ACPI-WMI Extras [ 23.437767] acer_wmi: Function bitmap for Communication Button: 0x801 [ 23.445426] input: Acer WMI hotkeys as /devices/virtual/input/input9 [ 23.530758] ath: phy0: WB335 1-ANT card detected [ 23.538225] ath: phy0: Enable LNA combining [ 23.539332] ath: phy0: ASPM enabled: 0x42 [ 23.539337] ath: EEPROM regdomain: 0x65 [ 23.539338] ath: EEPROM indicates we should expect a direct regpair map [ 23.539342] ath: Country alpha2 being used: 00 [ 23.539342] ath: Regpair used: 0x65 [ 23.576902] Bluetooth: Core ver 2.22 [ 23.576945] NET: Registered protocol family 31 [ 23.576947] Bluetooth: HCI device and connection manager initialized [ 23.576954] Bluetooth: HCI socket layer initialized [ 23.576958] Bluetooth: L2CAP socket layer initialized [ 23.576970] Bluetooth: SCO socket layer initialized [ 23.626689] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 23.627631] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffff9d6a42880000, irq=36 [ 23.733782] usbcore: registered new interface driver btusb [ 24.140528] cryptd: max_cpu_qlen set to 1000 [ 24.394196] usb 4-2: USB disconnect, device number 2 [ 24.395165] usbcore: registered new interface driver ath3k [ 24.968147] usb 4-2: new full-speed USB device number 3 using ohci-pci [ 25.997040] usb 3-1: 1:1: cannot get freq at ep 0x1 [ 26.007042] usb 3-1: 1:2: cannot get freq at ep 0x1 [ 26.019040] usb 3-1: 2:1: cannot get freq at ep 0x82 [ 26.028545] usbcore: registered new interface driver snd-usb-audio [ 26.032062] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0 [ 26.227879] AVX version of gcm_enc/dec engaged. [ 26.227883] AES CTR mode by8 optimization enabled [ 26.856067] media: Linux media interface: v0.10 [ 26.876950] Linux video capture interface: v2.00 [ 26.891547] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 26.996253] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10 [ 27.000784] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 27.000794] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 27.000797] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 27.000799] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0 [ 27.000800] snd_hda_codec_realtek hdaudioC2D0: inputs: [ 27.000803] snd_hda_codec_realtek hdaudioC2D0: Mic=0x1b [ 27.014563] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card2/input11 [ 27.117507] audit: type=1400 audit(1565367783.564:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5145/usr/lib/snapd/snap-confine" pid=583 comm="apparmor_parser" [ 27.117517] audit: type=1400 audit(1565367783.564:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5145/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=583 comm="apparmor_parser" [ 27.229339] audit: type=1400 audit(1565367783.676:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=582 comm="apparmor_parser" [ 27.229348] audit: type=1400 audit(1565367783.676:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=582 comm="apparmor_parser" [ 27.229352] audit: type=1400 audit(1565367783.676:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=582 comm="apparmor_parser" [ 27.229356] audit: type=1400 audit(1565367783.676:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=582 comm="apparmor_parser" [ 27.268450] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336) [ 27.292265] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 27.292270] uvcvideo 2-1:1.0: Entity type for entity Extension 6 was not initialized! [ 27.292272] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 27.292424] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input12 [ 27.292577] usbcore: registered new interface driver uvcvideo [ 27.292578] USB Video Class driver (1.1.1) [ 27.503076] audit: type=1400 audit(1565367783.948:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=581 comm="apparmor_parser" [ 27.503085] audit: type=1400 audit(1565367783.948:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=581 comm="apparmor_parser" [ 27.505585] audit: type=1400 audit(1565367783.952:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=686 comm="apparmor_parser" [ 27.505593] audit: type=1400 audit(1565367783.952:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=686 comm="apparmor_parser" [ 27.909766] kvm: disabled by bios [ 27.953324] kvm: disabled by bios [ 27.993450] kvm: disabled by bios [ 28.029289] kvm: disabled by bios [ 28.159158] MCE: In-kernel MCE decoding enabled. [ 28.669475] EDAC amd64: Node 0: DRAM ECC disabled. [ 28.669479] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 28.708907] EDAC amd64: Node 0: DRAM ECC disabled. [ 28.708910] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 28.756912] EDAC amd64: Node 0: DRAM ECC disabled. [ 28.756916] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 28.801214] EDAC amd64: Node 0: DRAM ECC disabled. [ 28.801218] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 30.369058] usb 4-2: New USB device found, idVendor=04ca, idProduct=300b, bcdDevice= 0.02 [ 30.369063] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 34.363264] Adding 3929084k swap on /dev/sda5. Priority:-2 extents:1 across:3929084k FS [ 36.547866] zram: Added device: zram0 [ 36.548085] zram: Added device: zram1 [ 36.549243] zram: Added device: zram2 [ 36.550310] zram: Added device: zram3 [ 37.794665] zram0: detected capacity change from 0 to 444133376 [ 39.093789] Adding 433720k swap on /dev/zram0. Priority:5 extents:1 across:433720k SSFS [ 39.095082] zram1: detected capacity change from 0 to 444133376 [ 39.103286] Adding 433720k swap on /dev/zram1. Priority:5 extents:1 across:433720k SSFS [ 39.104621] zram2: detected capacity change from 0 to 444133376 [ 39.113312] Adding 433720k swap on /dev/zram2. Priority:5 extents:1 across:433720k SSFS [ 39.114775] zram3: detected capacity change from 0 to 444133376 [ 39.122901] Adding 433720k swap on /dev/zram3. Priority:5 extents:1 across:433720k SSFS [ 40.350306] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 40.350309] Bluetooth: BNEP filters: protocol multicast [ 40.350318] Bluetooth: BNEP socket layer initialized [ 42.534884] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 42.547561] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 42.557460] IPv6: ADDRCONF(NETDEV_UP): enp1s0f0: link is not ready [ 42.559923] IPv6: ADDRCONF(NETDEV_UP): enp1s0f0: link is not ready [ 43.683984] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 65.381624] wlp5s0: authenticate with 60:31:97:6b:1a:73 [ 65.398499] wlp5s0: send auth to 60:31:97:6b:1a:73 (try 1/3) [ 65.400954] wlp5s0: authenticated [ 65.404053] wlp5s0: associate with 60:31:97:6b:1a:73 (try 1/3) [ 65.415010] wlp5s0: RX AssocResp from 60:31:97:6b:1a:73 (capab=0x411 status=0 aid=5) [ 65.415151] wlp5s0: associated [ 65.609554] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready [ 321.358568] usb 3-1: USB disconnect, device number 2 [ 521.014969] wlp5s0: deauthenticating from 60:31:97:6b:1a:73 by local choice (Reason: 3=DEAUTH_LEAVING) [ 528.836152] wlp5s0: authenticate with 60:31:97:6b:1a:73 [ 528.848364] wlp5s0: send auth to 60:31:97:6b:1a:73 (try 1/3) [ 528.850362] wlp5s0: authenticated [ 528.855252] wlp5s0: associate with 60:31:97:6b:1a:73 (try 1/3) [ 528.858791] wlp5s0: RX AssocResp from 60:31:97:6b:1a:73 (capab=0x411 status=0 aid=5) [ 528.858930] wlp5s0: associated [ 975.752616] wlp5s0: deauthenticating from 60:31:97:6b:1a:73 by local choice (Reason: 3=DEAUTH_LEAVING) [ 979.913476] usb 3-1: new full-speed USB device number 3 using ohci-pci [ 980.112686] usb 3-1: config 1 has an invalid interface number: 4 but max is 3 [ 980.112696] usb 3-1: config 1 has no interface number 3 [ 980.120669] usb 3-1: New USB device found, idVendor=1210, idProduct=000a, bcdDevice= 0.01 [ 980.120681] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 980.120687] usb 3-1: Product: Lexicon Alpha [ 980.120692] usb 3-1: Manufacturer: Lexicon [ 980.139673] usb 3-1: 1:1: cannot get freq at ep 0x1 [ 980.145599] usb 3-1: 1:2: cannot get freq at ep 0x1 [ 980.153575] usb 3-1: 2:1: cannot get freq at ep 0x82 [ 987.570041] wlp5s0: authenticate with 60:31:97:6b:1a:73 [ 987.582712] wlp5s0: send auth to 60:31:97:6b:1a:73 (try 1/3) [ 987.584931] wlp5s0: authenticated [ 987.589097] wlp5s0: associate with 60:31:97:6b:1a:73 (try 1/3) [ 987.592604] wlp5s0: RX AssocResp from 60:31:97:6b:1a:73 (capab=0x411 status=0 aid=5) [ 987.592743] wlp5s0: associated [ 990.669638] usb usb3-port1: disabled by hub (EMI?), re-enabling... [ 990.669653] usb 3-1: USB disconnect, device number 3 [ 990.976969] usb 3-1: new full-speed USB device number 4 using ohci-pci [ 991.211555] usb 3-1: config 1 has an invalid interface number: 4 but max is 3 [ 991.211561] usb 3-1: config 1 has no interface number 3 [ 991.219672] usb 3-1: New USB device found, idVendor=1210, idProduct=000a, bcdDevice= 0.01 [ 991.219678] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 991.219681] usb 3-1: Product: Lexicon Alpha [ 991.219683] usb 3-1: Manufacturer: Lexicon [ 991.238571] usb 3-1: 1:1: cannot get freq at ep 0x1 [ 991.244550] usb 3-1: 1:2: cannot get freq at ep 0x1 [ 991.252550] usb 3-1: 2:1: cannot get freq at ep 0x82 [ 1263.365108] usbcore: deregistering interface driver snd-usb-audio [ 1263.659127] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 1263.664555] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input13 [ 1263.668711] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 1263.668717] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 1263.668724] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 1263.668726] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1263.668728] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1263.668731] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1b [ 1263.682110] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14 [ 1263.709685] usb 3-1: 1:1: cannot get freq at ep 0x1 [ 1263.715761] usb 3-1: 1:2: cannot get freq at ep 0x1 [ 1263.727685] usb 3-1: 2:1: cannot get freq at ep 0x82 [ 1263.734193] usbcore: registered new interface driver snd-usb-audio

France
  • lsmod est un utilitaire qui liste ("ls") les modules-noyau chargé ("mod")
  • dmesg est un utilitaire qui permet de visualiser les infos provenant du noyau

Utiliser ces 2 commandes ici nous permet de double-vérifier quel est le module utilisé pour la lexicon.

Dans le lsmod, on voit que le module snd_usb_audio est utilisé lorsque la lexicon est connectée (alors qu'il ne l'est pas lorsqu'elle ne l'est pas).

Dans le dmesg lorsque tu as connecté la lexicon, on voit ceci apparaître :
Copy to clipboard
[ 979.913476] usb 3-1: new full-speed USB device number 3 using ohci-pci [ 980.112686] usb 3-1: config 1 has an invalid interface number: 4 but max is 3 [ 980.112696] usb 3-1: config 1 has no interface number 3 [ 980.120669] usb 3-1: New USB device found, idVendor=1210, idProduct=000a, bcdDevice= 0.01 [ 980.120681] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 980.120687] usb 3-1: Product: Lexicon Alpha [ 980.120692] usb 3-1: Manufacturer: Lexicon [ 980.139673] usb 3-1: 1:1: cannot get freq at ep 0x1 [ 980.145599] usb 3-1: 1:2: cannot get freq at ep 0x1 [ 980.153575] usb 3-1: 2:1: cannot get freq at ep 0x82


Ici, on peut voir que le noyau reconnaît que la lexicon est branchée.


Copy to clipboard
[ 990.669653] usb 3-1: USB disconnect, device number 3 [ 990.976969] usb 3-1: new full-speed USB device number 4 using ohci-pci [ 991.211555] usb 3-1: config 1 has an invalid interface number: 4 but max is 3 [ 991.211561] usb 3-1: config 1 has no interface number 3 [ 991.219672] usb 3-1: New USB device found, idVendor=1210, idProduct=000a, bcdDevice= 0.01 [ 991.219678] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 991.219681] usb 3-1: Product: Lexicon Alpha [ 991.219683] usb 3-1: Manufacturer: Lexicon [ 991.238571] usb 3-1: 1:1: cannot get freq at ep 0x1 [ 991.244550] usb 3-1: 1:2: cannot get freq at ep 0x1 [ 991.252550] usb 3-1: 2:1: cannot get freq at ep 0x82


Même chose ici. Probablement que tu l'avais déconnectée puis reconnectée.


Bon, j'aurai aimé voir une ligne qui dise que la lexicon est enregistrée avec le snd-usb-audio, mais je pense qu'on peut ici être raisonnablement certain que c'est bien le module utilisé.


Par contre, à la lecture du dmesg, ces 3 lignes peuvent sembler inquiétantes :
Copy to clipboard
[ 25.997040] usb 3-1: 1:1: cannot get freq at ep 0x1 [ 26.007042] usb 3-1: 1:2: cannot get freq at ep 0x1 [ 26.019040] usb 3-1: 2:1: cannot get freq at ep 0x82


On dirait que la lexicon ne parvient pas à se synchroniser.


Question avant d'aller plus loin ici : à part le fait qu'elle ne soit pas en position 1 (le sujet initial de ce fil de discussion), elle fonctionne bien cette lexicon en ce moment ?
déjà un grand merci pour ta lecture et réponse détaillée

la lexicon fonctionne relativement bien
si ce n'est qu'elle saute de temps à autre
souvent dans ds moments d'inactivité
ou bien, parfois, à l'instant où je connecte ma console de mixage
mais ce n'est pas systématique

je ferme alors ma session puis la réouvre et ça se remet en place
A relire ce fil, il parait clair que ton pilote est bien le snd-usb-audio.
Celui-ci comporte certaines restrictions (échantillonnage, nombre d'E/S, ...) aussi tu as peut-être une incohérence entre ces limitations et les paramètres déclarés dans jackd.
soit
si tu le dis

il y aurait un pb avec snd-usb-audio ?

mais alors
que dois-je faire maintenant ?

////////////////////////////////////////////////

question 2 :

je reviens à l'intitulé du thread
comment changer l'ordre des cartes sons (et placer HDMI en 3 - voire la désactiver si possible)

(pour éviter les redites, je te renvoie à mon tout premier post)
Ouaip !

J'ai fait des recherches ce matin. Je voulais te donner le lien sur snd-usb-audio. Pas trouvé...
Mes souvenirs me rappellent que juste 2 entrées et 2 sorties sont prises en compte. L'échantillonnage doit être bridé à 44,100 hz, il me semble et seul le flux USB1 est pris en compte. Problème de synchronisation ?
Mais méfiance, je ne trouve plus mes sources d'info.

Quand au HDMI, le mieux serait peut-être, si cela ne te handicape pas trop, de le désactiver dans ton BIOS/UEFI ?
France
allany écrit:
J'ai fait des recherches ce matin. Je voulais te donner le lien sur snd-usb-audio. Pas trouvé...


des infos à ce propos sur notre site.


allany écrit:
Quand au HDMI, le mieux serait peut-être, si cela ne te handicape pas trop, de le désactiver dans ton BIOS/UEFI ?


Et si pas possible de le désactiver dans le BIOS/UEFI, voir la page HDMI pour le blacklister.