Chargement...
 
Skip to main content

1 - Le matériel et les pilotes ALSA, FFADO, ...

Liste des forums Liste des sujets

Forums > 1 - Le matériel et les pilotes ALSA, FFADO, ... > [ABANDONNÉE] Jack ne veut pas ce lancer
 
Thread actions
Print this page
  • Imprimer toutes les pages

    • [ABANDONNÉE] Jack ne veut pas ce lancer

    Envoyé par BlackAngel77 le Samedi 25 avril 2020 22:00
    bonsoir à tous

    ce soir j'ai un problème et je n'arrive pas à le résoudre.

    Jack ne ce lance pas et voici son log:
    Copy to clipboard
    Sat Apr 25 21:49:39 2020: Starting jack server...
Sat Apr 25 21:49:39 2020: JACK server starting in realtime mode with priority 80
Sat Apr 25 21:49:39 2020: self-connect-mode is "Don't restrict self connect requests"
Sat Apr 25 21:49:39 2020: Acquired audio card Audio1
Sat Apr 25 21:49:39 2020: creating alsa driver ... hw:DSP24,0|hw:DSP24,2|128|2|48000|10|10|hwmon|hwmeter|-|32bit
Sat Apr 25 21:49:39 2020: ERROR: ALSA: Cannot open PCM device alsa_pcm for capture. Falling back to playback-only mode
Sat Apr 25 21:49:39 2020: configuring for 48000Hz, period = 128 frames (2.7 ms), buffer = 2 periods
Sat Apr 25 21:49:39 2020: ALSA: final selected sample format for playback: 32bit integer little-endian
Sat Apr 25 21:49:39 2020: ALSA: use 2 periods for playback
Sat Apr 25 21:49:43 2020: ERROR: ALSA: poll time out, polled for 3999032 usecs
Sat Apr 25 21:49:43 2020: ERROR: JackAudioDriver::ProcessAsync: read error, stopping...
Sat Apr 25 21:49:44 2020: ERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out
Sat Apr 25 21:49:44 2020: ERROR: Driver is not running
Sat Apr 25 21:49:44 2020: ERROR: Cannot open client name = dbusapi
Sat Apr 25 21:49:44 2020: ERROR: failed to create dbusapi jack client
Sat Apr 25 21:49:44 2020: Released audio card Audio1


    la carte bien reconnu avec aplay -l et sur dmesg

    j'ai relancé l’ordinateur
    relancé jack en désactivant alsa et pulseaudio.
    forcer un redémarrage et toujours le même message

    pouvez-vous m'aider? please HELP-ME
    Lectures: 3065
    Envoyé par olinuxx le Lundi 27 avril 2020 16:12 France
    Quelle distribution ?
    Envoyé par BlackAngel77 le Lundi 27 avril 2020 16:20
    librazik 2
    Envoyé par BlackAngel77 le Lundi 27 avril 2020 19:41
    Bonsoir à tous

    Nouveau log ce soir, évolution par rapport à ce week-end.
    Jack toujours arrété

    Copy to clipboard
    Mon Apr 27 19:37:16 2020: ------------------
Mon Apr 27 19:37:16 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Mon Apr 27 19:37:17 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Mon Apr 27 19:37:17 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Mon Apr 27 19:37:17 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Mon Apr 27 19:37:17 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Mon Apr 27 19:37:17 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Mon Apr 27 19:37:17 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Mon Apr 27 19:37:17 2020: setting parameter 'drivers':'alsa':'period' to value "128"
Mon Apr 27 19:37:17 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Mon Apr 27 19:37:17 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Mon Apr 27 19:37:17 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Mon Apr 27 19:37:17 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Mon Apr 27 19:37:17 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Mon Apr 27 19:37:17 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Mon Apr 27 19:37:17 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Mon Apr 27 19:37:17 2020: Listening for D-Bus messages
Mon Apr 27 19:37:17 2020: Controller deactivated.
Mon Apr 27 19:37:19 2020: ------------------
Mon Apr 27 19:37:19 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Mon Apr 27 19:37:19 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Mon Apr 27 19:37:19 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Mon Apr 27 19:37:19 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Mon Apr 27 19:37:19 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Mon Apr 27 19:37:19 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Mon Apr 27 19:37:19 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Mon Apr 27 19:37:19 2020: setting parameter 'drivers':'alsa':'period' to value "128"
Mon Apr 27 19:37:19 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Mon Apr 27 19:37:19 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Mon Apr 27 19:37:19 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Mon Apr 27 19:37:19 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Mon Apr 27 19:37:19 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Mon Apr 27 19:37:19 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Mon Apr 27 19:37:19 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Mon Apr 27 19:37:19 2020: Listening for D-Bus messages
Mon Apr 27 19:37:19 2020: Controller deactivated.
Mon Apr 27 19:37:35 2020: ------------------
Mon Apr 27 19:37:35 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Mon Apr 27 19:37:35 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Mon Apr 27 19:37:35 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Mon Apr 27 19:37:35 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Mon Apr 27 19:37:35 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Mon Apr 27 19:37:35 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Mon Apr 27 19:37:35 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Mon Apr 27 19:37:35 2020: setting parameter 'drivers':'alsa':'period' to value "128"
Mon Apr 27 19:37:35 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Mon Apr 27 19:37:35 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Mon Apr 27 19:37:35 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Mon Apr 27 19:37:35 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Mon Apr 27 19:37:35 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Mon Apr 27 19:37:35 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Mon Apr 27 19:37:35 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Mon Apr 27 19:37:35 2020: Listening for D-Bus messages
Mon Apr 27 19:37:35 2020: Starting jack server...
Mon Apr 27 19:37:35 2020: ERROR: `default' server already active
Mon Apr 27 19:37:35 2020: ERROR: Failed to open server
Mon Apr 27 19:37:36 2020: ------------------
Mon Apr 27 19:37:36 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Mon Apr 27 19:37:36 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Mon Apr 27 19:37:36 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Mon Apr 27 19:37:36 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Mon Apr 27 19:37:36 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Mon Apr 27 19:37:36 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Mon Apr 27 19:37:36 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Mon Apr 27 19:37:36 2020: setting parameter 'drivers':'alsa':'period' to value "128"
Mon Apr 27 19:37:36 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Mon Apr 27 19:37:36 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Mon Apr 27 19:37:36 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Mon Apr 27 19:37:36 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Mon Apr 27 19:37:36 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Mon Apr 27 19:37:36 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Mon Apr 27 19:37:36 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Mon Apr 27 19:37:36 2020: Listening for D-Bus messages
Mon Apr 27 19:37:36 2020: Starting jack server...
Mon Apr 27 19:37:36 2020: ERROR: `default' server already active
Mon Apr 27 19:37:36 2020: ERROR: Failed to open server


    olinuxx on a du boulot 😀😀😀
    Envoyé par BlackAngel77 le Lundi 27 avril 2020 19:56
    et maintenant ça, après un redémarrage

    Copy to clipboard
    Mon Apr 27 19:52:52 2020: ------------------
Mon Apr 27 19:52:52 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Mon Apr 27 19:52:53 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Mon Apr 27 19:52:53 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Mon Apr 27 19:52:53 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Mon Apr 27 19:52:53 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Mon Apr 27 19:52:53 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Mon Apr 27 19:52:53 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Mon Apr 27 19:52:53 2020: setting parameter 'drivers':'alsa':'period' to value "128"
Mon Apr 27 19:52:53 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Mon Apr 27 19:52:53 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Mon Apr 27 19:52:53 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Mon Apr 27 19:52:53 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Mon Apr 27 19:52:53 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Mon Apr 27 19:52:53 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Mon Apr 27 19:52:53 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Mon Apr 27 19:52:53 2020: Listening for D-Bus messages
Mon Apr 27 19:52:53 2020: Controller deactivated.
Mon Apr 27 19:52:56 2020: ------------------
Mon Apr 27 19:52:56 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Mon Apr 27 19:52:56 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Mon Apr 27 19:52:56 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Mon Apr 27 19:52:56 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Mon Apr 27 19:52:56 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Mon Apr 27 19:52:56 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Mon Apr 27 19:52:56 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Mon Apr 27 19:52:56 2020: setting parameter 'drivers':'alsa':'period' to value "128"
Mon Apr 27 19:52:56 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Mon Apr 27 19:52:56 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Mon Apr 27 19:52:56 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Mon Apr 27 19:52:56 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Mon Apr 27 19:52:56 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Mon Apr 27 19:52:56 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Mon Apr 27 19:52:56 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Mon Apr 27 19:52:56 2020: Listening for D-Bus messages
Mon Apr 27 19:52:56 2020: Controller deactivated.
Mon Apr 27 19:53:00 2020: ------------------
Mon Apr 27 19:53:00 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Mon Apr 27 19:53:00 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Mon Apr 27 19:53:00 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Mon Apr 27 19:53:00 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Mon Apr 27 19:53:00 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Mon Apr 27 19:53:00 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Mon Apr 27 19:53:00 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Mon Apr 27 19:53:00 2020: setting parameter 'drivers':'alsa':'period' to value "128"
Mon Apr 27 19:53:00 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Mon Apr 27 19:53:00 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Mon Apr 27 19:53:00 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Mon Apr 27 19:53:00 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Mon Apr 27 19:53:00 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Mon Apr 27 19:53:00 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Mon Apr 27 19:53:00 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Mon Apr 27 19:53:00 2020: Listening for D-Bus messages
Mon Apr 27 19:53:01 2020: Starting jack server...
Mon Apr 27 19:53:01 2020: JACK server starting in realtime mode with priority 80
Mon Apr 27 19:53:01 2020: self-connect-mode is "Don't restrict self connect requests"
Mon Apr 27 19:53:01 2020: Acquired audio card Audio1
Mon Apr 27 19:53:01 2020: creating alsa driver ... hw:DSP24,0|hw:DSP24,2|128|2|48000|10|10|hwmon|hwmeter|-|32bit
Mon Apr 27 19:53:01 2020: ERROR: ALSA: Cannot open PCM device alsa_pcm for capture. Falling back to playback-only mode
Mon Apr 27 19:53:01 2020: configuring for 48000Hz, period = 128 frames (2.7 ms), buffer = 2 periods
Mon Apr 27 19:53:01 2020: ALSA: final selected sample format for playback: 32bit integer little-endian
Mon Apr 27 19:53:01 2020: ALSA: use 2 periods for playback
Mon Apr 27 19:53:05 2020: ERROR: ALSA: poll time out, polled for 3999034 usecs
Mon Apr 27 19:53:05 2020: ERROR: JackAudioDriver::ProcessAsync: read error, stopping...
Mon Apr 27 19:53:06 2020: ERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out
Mon Apr 27 19:53:06 2020: ERROR: Driver is not running
Mon Apr 27 19:53:06 2020: ERROR: Cannot open client name = dbusapi
Mon Apr 27 19:53:06 2020: ERROR: failed to create dbusapi jack client
Mon Apr 27 19:53:06 2020: Released audio card Audio1
Mon Apr 27 19:53:06 2020: Starting jack server...
Mon Apr 27 19:53:06 2020: JACK server starting in realtime mode with priority 80
Mon Apr 27 19:53:06 2020: self-connect-mode is "Don't restrict self connect requests"
Mon Apr 27 19:53:06 2020: Acquired audio card Audio1
Mon Apr 27 19:53:06 2020: creating alsa driver ... hw:DSP24,0|hw:DSP24,2|128|2|48000|10|10|hwmon|hwmeter|-|32bit
Mon Apr 27 19:53:06 2020: ERROR: ALSA: Cannot open PCM device alsa_pcm for capture. Falling back to playback-only mode
Mon Apr 27 19:53:06 2020: configuring for 48000Hz, period = 128 frames (2.7 ms), buffer = 2 periods
Mon Apr 27 19:53:06 2020: ALSA: final selected sample format for playback: 32bit integer little-endian
Mon Apr 27 19:53:06 2020: ALSA: use 2 periods for playback
Mon Apr 27 19:53:10 2020: ERROR: ALSA: poll time out, polled for 3999024 usecs
Mon Apr 27 19:53:10 2020: ERROR: JackAudioDriver::ProcessAsync: read error, stopping...
Mon Apr 27 19:53:11 2020: ERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out
Mon Apr 27 19:53:11 2020: ERROR: Driver is not running
Mon Apr 27 19:53:11 2020: ERROR: Cannot open client name = dbusapi
Mon Apr 27 19:53:11 2020: ERROR: failed to create dbusapi jack client
Mon Apr 27 19:53:11 2020: Released audio card Audio1


    encore un truc de ouf
    Envoyé par olinuxx le Mardi 28 avril 2020 14:59 France
    Copy to clipboard
    configuring for 48000Hz, period = 128 frames (2.7 ms), buffer = 2 periods


    Tu lui en demandes peut être trop.
    Essaie déjà avec 1024 frame.

    Une fois que le serveur sera démarré, tu abaisseras la valeur palier par palier pour voir jusqu'où ton système tient.
    Envoyé par BlackAngel77 le Mardi 28 avril 2020 15:55
    merci pour ce retour
    mais il à toujours était réglé comme cela qu'est ce qui à changé pour qu'il plante ?

    j'essaye ce soir et te tiens au courant
    Envoyé par BlackAngel77 le Mardi 28 avril 2020 19:22
    bonsoir olynuxx

    taille tampon à 8192
    il ne veut toujours pas
    nouveau log ci-dessous:

    Copy to clipboard
    Tue Apr 28 19:20:51 2020: Controller deactivated.
Tue Apr 28 19:20:51 2020: ------------------
Tue Apr 28 19:20:51 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Tue Apr 28 19:20:51 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Tue Apr 28 19:20:51 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Tue Apr 28 19:20:51 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Tue Apr 28 19:20:51 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Tue Apr 28 19:20:51 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Tue Apr 28 19:20:51 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Tue Apr 28 19:20:51 2020: setting parameter 'drivers':'alsa':'period' to value "8192"
Tue Apr 28 19:20:51 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Tue Apr 28 19:20:51 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Tue Apr 28 19:20:51 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Tue Apr 28 19:20:51 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Tue Apr 28 19:20:51 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Tue Apr 28 19:20:51 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Tue Apr 28 19:20:51 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Tue Apr 28 19:20:51 2020: Listening for D-Bus messages
Tue Apr 28 19:21:03 2020: ------------------
Tue Apr 28 19:21:03 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Tue Apr 28 19:21:03 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Tue Apr 28 19:21:03 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Tue Apr 28 19:21:03 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Tue Apr 28 19:21:03 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Tue Apr 28 19:21:03 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Tue Apr 28 19:21:03 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Tue Apr 28 19:21:03 2020: setting parameter 'drivers':'alsa':'period' to value "8192"
Tue Apr 28 19:21:03 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Tue Apr 28 19:21:03 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Tue Apr 28 19:21:03 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Tue Apr 28 19:21:03 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Tue Apr 28 19:21:03 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Tue Apr 28 19:21:03 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Tue Apr 28 19:21:03 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Tue Apr 28 19:21:03 2020: Listening for D-Bus messages
Tue Apr 28 19:21:03 2020: Starting jack server...
Tue Apr 28 19:21:03 2020: ERROR: `default' server already active
Tue Apr 28 19:21:03 2020: ERROR: Failed to open server
Tue Apr 28 19:21:37 2020: Saving settings to "/home/totof/.config/jack/conf.xml" ...

    Envoyé par BlackAngel77 le Mercredi 29 avril 2020 19:24
    Bonsoir olinuxx
    taille tampon à 4096
    ça ne veut toujours pas, log de ce soir ci-dessous:

    Copy to clipboard
    Wed Apr 29 19:20:52 2020: ------------------
Wed Apr 29 19:20:52 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Wed Apr 29 19:20:52 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Wed Apr 29 19:20:52 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Wed Apr 29 19:20:52 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Wed Apr 29 19:20:52 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Wed Apr 29 19:20:52 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Wed Apr 29 19:20:52 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Wed Apr 29 19:20:52 2020: setting parameter 'drivers':'alsa':'period' to value "2048"
Wed Apr 29 19:20:52 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Wed Apr 29 19:20:52 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Wed Apr 29 19:20:52 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Wed Apr 29 19:20:52 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Wed Apr 29 19:20:52 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Wed Apr 29 19:20:52 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Wed Apr 29 19:20:52 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Wed Apr 29 19:20:52 2020: Listening for D-Bus messages
Wed Apr 29 19:21:41 2020: Saving settings to "/home/totof/.config/jack/conf.xml" ...
Wed Apr 29 19:21:46 2020: Saving settings to "/home/totof/.config/jack/conf.xml" ...
Wed Apr 29 19:21:53 2020: Controller deactivated.
Wed Apr 29 19:21:53 2020: ------------------
Wed Apr 29 19:21:53 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Wed Apr 29 19:21:53 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Wed Apr 29 19:21:53 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Wed Apr 29 19:21:53 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Wed Apr 29 19:21:53 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Wed Apr 29 19:21:53 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Wed Apr 29 19:21:53 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Wed Apr 29 19:21:53 2020: setting parameter 'drivers':'alsa':'period' to value "4096"
Wed Apr 29 19:21:53 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Wed Apr 29 19:21:53 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Wed Apr 29 19:21:53 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Wed Apr 29 19:21:53 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Wed Apr 29 19:21:53 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Wed Apr 29 19:21:53 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Wed Apr 29 19:21:53 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Wed Apr 29 19:21:53 2020: Listening for D-Bus messages
Wed Apr 29 19:22:06 2020: ------------------
Wed Apr 29 19:22:06 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Wed Apr 29 19:22:06 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Wed Apr 29 19:22:06 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Wed Apr 29 19:22:06 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Wed Apr 29 19:22:06 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Wed Apr 29 19:22:06 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Wed Apr 29 19:22:06 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Wed Apr 29 19:22:06 2020: setting parameter 'drivers':'alsa':'period' to value "4096"
Wed Apr 29 19:22:06 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Wed Apr 29 19:22:06 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Wed Apr 29 19:22:06 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Wed Apr 29 19:22:06 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Wed Apr 29 19:22:06 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Wed Apr 29 19:22:06 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Wed Apr 29 19:22:06 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Wed Apr 29 19:22:06 2020: Listening for D-Bus messages
Wed Apr 29 19:22:06 2020: Starting jack server...
Wed Apr 29 19:22:06 2020: ERROR: `default' server already active
Wed Apr 29 19:22:06 2020: ERROR: Failed to open server

    Envoyé par BlackAngel77 le Mercredi 29 avril 2020 19:28
    Quelqu'un aurait-il une solution à mon problème.
    je ne fait plus rien depuis ce week-end et pas de solution de replis pour le moment
    Envoyé par allany le Mercredi 29 avril 2020 19:41
    jackd écrit:
    Wed Apr 29 19:22:06 2020: ERROR: `default' server already active
    Wed Apr 29 19:22:06 2020: ERROR: Failed to open server

    Il semblerait que ton serveur-son soit déjà accaparé...

    As-tu bien 10 entrées et 10 sorties sur la carte concernée ?
    Peux-tu poster les résultats de :
    Copy to clipboard
    aplay -l
arecord -l
    ainsi que les messages de jackd (pas le log) afin de voir tous les réglages, en particulier ceux balancés à alsa ?
    Envoyé par BlackAngel77 le Mercredi 29 avril 2020 21:01
    Bonsoir allany

    Tous cela a été fait il y a 9 mois avec jujudusud, sub26nico et olinuxx au moment que je me suis connecté à ce site pour relancé mon home studio qui à 20 ans.

    Les paramêtres de 10 entrée et 10 sortie on était indiqué suite à plusieurs soirée de webchat.
    On avait réussi à tout faire fonctionner.

    J’essaye de poster tout cela dans la soirée.
    Envoyé par allany le Mercredi 29 avril 2020 21:29
    OK, merci.
    On pourra clore le fil, alors.
    Envoyé par BlackAngel77 le Mercredi 29 avril 2020 21:39
    aplay -l

    Copy to clipboard
    totof@totofstationprincipale:~$ aplay -l
**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: NVidia_1 [HDA NVidia], périphérique 3: HDMI 0 [HDMI 0]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: NVidia_1 [HDA NVidia], périphérique 7: HDMI 1 [HDMI 1]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 1: NVidia [HDA NVidia], périphérique 3: HDMI 0 [HDMI 0]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 1: NVidia [HDA NVidia], périphérique 7: HDMI 1 [HDMI 1]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 2: DSP24 [Hoontech SoundTrack Audio DSP24], périphérique 0: ICE1712 multi [ICE1712 multi]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 2: DSP24 [Hoontech SoundTrack Audio DSP24], périphérique 1: ICE1712 consumer [ICE1712 consumer]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 2: DSP24 [Hoontech SoundTrack Audio DSP24], périphérique 2: ICE1712 consumer (DS) [ICE1712 consumer (DS)]
  Sous-périphériques: 6/6
  Sous-périphérique #0: subdevice #0
  Sous-périphérique #1: subdevice #1
  Sous-périphérique #2: subdevice #2
  Sous-périphérique #3: subdevice #3
  Sous-périphérique #4: subdevice #4
  Sous-périphérique #5: subdevice #5


    arecord -l

    Copy to clipboard
    **** Liste des Périphériques Matériels CAPTURE ****
carte 2: DSP24 [Hoontech SoundTrack Audio DSP24], périphérique 0: ICE1712 multi [ICE1712 multi]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 2: DSP24 [Hoontech SoundTrack Audio DSP24], périphérique 1: ICE1712 consumer [ICE1712 consumer]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0


    page principale de cadence
    Capture Du 2020 04 29 21 33 57

    page moteur des paramètres de jack
    Capture Du 2020 04 29 21 35 43

    page pilote des paramètres de jack
    Capture Du 2020 04 29 21 36 29

    log de jack
    Copy to clipboard
    Wed Apr 29 21:33:44 2020: ------------------
Wed Apr 29 21:33:44 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Wed Apr 29 21:33:44 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Wed Apr 29 21:33:44 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Wed Apr 29 21:33:44 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Wed Apr 29 21:33:44 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Wed Apr 29 21:33:44 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,2"
Wed Apr 29 21:33:44 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Wed Apr 29 21:33:44 2020: setting parameter 'drivers':'alsa':'period' to value "4096"
Wed Apr 29 21:33:44 2020: setting parameter 'drivers':'alsa':'hwmon' to value "true"
Wed Apr 29 21:33:44 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "true"
Wed Apr 29 21:33:44 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Wed Apr 29 21:33:44 2020: setting parameter 'drivers':'alsa':'monitor' to value "true"
Wed Apr 29 21:33:44 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Wed Apr 29 21:33:44 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Wed Apr 29 21:33:44 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Wed Apr 29 21:33:44 2020: Listening for D-Bus messages
Wed Apr 29 21:35:06 2020: Saving settings to "/home/totof/.config/jack/conf.xml" ...


    log A2J
    Copy to clipboard
    Wed Apr 29 19:20:52 2020: ----------------------------
Wed Apr 29 19:20:52 2020: JACK MIDI <-> ALSA sequencer MIDI bridge, version 8 (7383d268c4bfe85df9f10df6351677659211d1ca) built on Sat Jun 24 16:17:53 2017
Wed Apr 29 19:20:52 2020: Copyright 2006,2007 Dmitry S. Baikov
Wed Apr 29 19:20:52 2020: Copyright 2007,2008,2009,2011,2012 Nedko Arnaudov
Wed Apr 29 19:20:52 2020: ----------------------------
Wed Apr 29 19:20:52 2020: Activated.
Wed Apr 29 19:22:00 2020: Deactivated.
Wed Apr 29 19:22:00 2020: ----------------------------
Wed Apr 29 19:22:06 2020: ----------------------------
Wed Apr 29 19:22:06 2020: JACK MIDI <-> ALSA sequencer MIDI bridge, version 8 (7383d268c4bfe85df9f10df6351677659211d1ca) built on Sat Jun 24 16:17:53 2017
Wed Apr 29 19:22:06 2020: Copyright 2006,2007 Dmitry S. Baikov
Wed Apr 29 19:22:06 2020: Copyright 2007,2008,2009,2011,2012 Nedko Arnaudov
Wed Apr 29 19:22:06 2020: ----------------------------
Wed Apr 29 19:22:06 2020: Activated.
Wed Apr 29 19:30:08 2020: WARNING: Disconnect message was received from D-Bus.
Wed Apr 29 19:30:08 2020: Deactivated.
Wed Apr 29 19:30:08 2020: ----------------------------
Wed Apr 29 21:33:44 2020: ----------------------------
Wed Apr 29 21:33:44 2020: JACK MIDI <-> ALSA sequencer MIDI bridge, version 8 (7383d268c4bfe85df9f10df6351677659211d1ca) built on Sat Jun 24 16:17:53 2017
Wed Apr 29 21:33:44 2020: Copyright 2006,2007 Dmitry S. Baikov
Wed Apr 29 21:33:44 2020: Copyright 2007,2008,2009,2011,2012 Nedko Arnaudov
Wed Apr 29 21:33:44 2020: ----------------------------
Wed Apr 29 21:33:44 2020: Activated.


    voici voila

    merci beaucoup pour votre aide
    Envoyé par piep le Jeudi 30 avril 2020 01:50 France
    Bonjour,

    Vérifie qu'un processus jack ne tourne pas déjà malgré le fait que l'interface graphique affiche qu'il ne tourne pas.
    Copy to clipboard
    # ps fax | grep jack


    le premier message d'erreur était toujours le même :
    ERROR: ALSA: Cannot open PCM device alsa_pcm for capture.

    impossible d'ouvir l'entrée audio "hw:DSP24,2"
    or je ne voie pas de problème sur la sortie de "arecord"

    Copy to clipboard
    **** Liste des Périphériques Matériels CAPTURE ****
carte 2: DSP24 [Hoontech SoundTrack Audio DSP24], périphérique 0: ICE1712 multi [ICE1712 multi]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 2: DSP24 [Hoontech SoundTrack Audio DSP24], périphérique 1: ICE1712 consumer [ICE1712 consumer]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0


    d'après les photos l'entré choisit est :
    périphérique 1: ICE1712 consumer

    3) d'apres la page Hoontech+dsp+24
    le pilote est "snd-ice1712". Merci de vérifier que ce module est bien chargé dans le noyau Linux.
    Copy to clipboard
    # lsmod | grep ice17

    4) le log affiche :
    'drivers':'alsa':'device' to value "hw:DSP24,0"
    'drivers':'alsa':'capture' to value "hw:DSP24,2"
    'drivers':'alsa':'playback' to value "hw:DSP24,0"

    Peux tu donner le contenu du fichier : /home/totof/.config/jack/conf.xml ?
    il y a peut être un truc bizarre dedans .
    regarde la si ça peut aider : https://alsa.opensrc.org/MultipleCards

    5) dans ton prochain essaie :
    - enleve le mode duplex
    - enleve les 2 moniteurs
    - enleve le mesureur matériel

    fais un essai avec :ICE1712 consumer (comme actuel)
    et un autre avec ICE1712 multi
    c'est peut être un problème de port matériel.

    essaie aussi en diminuant le nombre de canaux à 2 . tu pourras remonter après les essais.
    le but est de démarrer jack avec moins d'options.

    voilà donc.
    Piep
    Envoyé par BlackAngel77 le Jeudi 30 avril 2020 15:04
    bonjour piep

    je vais tester cela ce week-end.

    pour information voila les pages consulté ce jour

    https://linuxmusicians.com/viewtopic.php?t=17079
    Dommage il ne vont pas jusqu'au bout

    https://code.google.com/archive/p/mudita24/
    bonne information

    https://techgage.com/news/disabling_nvidias_hdmi_audio_under_linux/
    c'est mon cas donc à vérifier

    https://wiki.archlinux.org/index.php/Envy24control
    très interressant, à si replonger à tête reposé

    vous tiens au courant
    Envoyé par BlackAngel77 le Vendredi 01 mai 2020 19:00
    bonjour à tous

    ordinateur allumé, cadence non lancé

    piep je reprend point par point tes demandes

    ps fax | grep jack
    Copy to clipboard
    2278 pts/0    S+     0:00          |           \_ grep jack


    lsmod | grep ice17
    Copy to clipboard
    totof@totofstationprincipale:~$ lsmod | grep ice17
snd_ice1712            73728  2
snd_cs8427             16384  1 snd_ice1712
snd_i2c                16384  2 snd_ice1712,snd_cs8427
snd_ice17xx_ak4xxx     16384  1 snd_ice1712
snd_ak4xxx_adda        20480  2 snd_ice17xx_ak4xxx,snd_ice1712
snd_mpu401_uart        16384  1 snd_ice1712
snd_ac97_codec        131072  1 snd_ice1712
snd_pcm               114688  6 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_ac97_codec,snd_ice1712,snd_hda_codec_hdmi
snd                    86016  28 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_ac97_codec,snd_timer,snd_ice1712,snd_mpu401_uart,snd_ak4xxx_adda,snd_rawmidi,snd_hda_codec_hdmi,snd_seq_device,snd_i2c,snd_cs8427,snd_pcm


    /home/totof/.config/jack/conf.xml
    Copy to clipboard
    bash: cd/home/totof/.config/jack/conf.xml: Aucun fichier ou dossier de ce type


    tous les test effectué est il me ressort au choix un des deux log ci-dessous
    Copy to clipboard
    Fri May  1 18:56:21 2020: Controller deactivated.
Fri May  1 18:56:21 2020: ------------------
Fri May  1 18:56:21 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Fri May  1 18:56:21 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Fri May  1 18:56:21 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Fri May  1 18:56:21 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Fri May  1 18:56:21 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,1"
Fri May  1 18:56:21 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,0"
Fri May  1 18:56:21 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Fri May  1 18:56:21 2020: setting parameter 'drivers':'alsa':'period' to value "1024"
Fri May  1 18:56:21 2020: setting parameter 'drivers':'alsa':'hwmon' to value "false"
Fri May  1 18:56:21 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "false"
Fri May  1 18:56:21 2020: setting parameter 'drivers':'alsa':'duplex' to value "false"
Fri May  1 18:56:21 2020: setting parameter 'drivers':'alsa':'monitor' to value "false"
Fri May  1 18:56:21 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Fri May  1 18:56:21 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Fri May  1 18:56:21 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Fri May  1 18:56:21 2020: Listening for D-Bus messages
Fri May  1 18:56:27 2020: ------------------
Fri May  1 18:56:27 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Fri May  1 18:56:27 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Fri May  1 18:56:27 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Fri May  1 18:56:27 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Fri May  1 18:56:27 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,1"
Fri May  1 18:56:27 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,0"
Fri May  1 18:56:27 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Fri May  1 18:56:27 2020: setting parameter 'drivers':'alsa':'period' to value "1024"
Fri May  1 18:56:27 2020: setting parameter 'drivers':'alsa':'hwmon' to value "false"
Fri May  1 18:56:27 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "false"
Fri May  1 18:56:27 2020: setting parameter 'drivers':'alsa':'duplex' to value "false"
Fri May  1 18:56:27 2020: setting parameter 'drivers':'alsa':'monitor' to value "false"
Fri May  1 18:56:27 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Fri May  1 18:56:27 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Fri May  1 18:56:27 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Fri May  1 18:56:27 2020: Listening for D-Bus messages
Fri May  1 18:56:27 2020: Starting jack server...
Fri May  1 18:56:27 2020: JACK server starting in realtime mode with priority 80
Fri May  1 18:56:27 2020: self-connect-mode is "Don't restrict self connect requests"
Fri May  1 18:56:27 2020: Acquired audio card Audio0
Fri May  1 18:56:27 2020: creating alsa driver ... hw:DSP24,0|hw:DSP24,0|1024|2|48000|10|10|nomon|swmeter|-|32bit
Fri May  1 18:56:27 2020: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
Fri May  1 18:56:27 2020: ALSA: final selected sample format for capture: 32bit integer little-endian
Fri May  1 18:56:27 2020: ERROR: ALSA: cannot set channel count to 10 for capture
Fri May  1 18:56:27 2020: ERROR: ALSA: cannot configure capture channel
Fri May  1 18:56:27 2020: Released audio card Audio0
Fri May  1 18:56:27 2020: ERROR: Cannot initialize driver
Fri May  1 18:56:27 2020: ERROR: JackServer::Open failed with -1
Fri May  1 18:56:27 2020: ERROR: Failed to open server
Fri May  1 18:56:32 2020: Saving settings to "/home/totof/.config/jack/conf.xml" ...
Fri May  1 18:56:37 2020: Saving settings to "/home/totof/.config/jack/conf.xml" ...


    Copy to clipboard
    Fri May  1 18:56:40 2020: Saving settings to "/home/totof/.config/jack/conf.xml" ...
Fri May  1 18:56:42 2020: Controller deactivated.
Fri May  1 18:56:42 2020: ------------------
Fri May  1 18:56:42 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Fri May  1 18:56:42 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Fri May  1 18:56:42 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Fri May  1 18:56:42 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Fri May  1 18:56:42 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Fri May  1 18:56:42 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,0"
Fri May  1 18:56:42 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Fri May  1 18:56:42 2020: setting parameter 'drivers':'alsa':'period' to value "1024"
Fri May  1 18:56:42 2020: setting parameter 'drivers':'alsa':'hwmon' to value "false"
Fri May  1 18:56:42 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "false"
Fri May  1 18:56:42 2020: setting parameter 'drivers':'alsa':'duplex' to value "false"
Fri May  1 18:56:42 2020: setting parameter 'drivers':'alsa':'monitor' to value "false"
Fri May  1 18:56:42 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Fri May  1 18:56:42 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Fri May  1 18:56:42 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Fri May  1 18:56:42 2020: Listening for D-Bus messages
Fri May  1 18:56:54 2020: ------------------
Fri May  1 18:56:54 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Dec 21 16:02:24 2017
Fri May  1 18:56:54 2020: Loading settings from "/home/totof/.config/jack/conf.xml" using expat_2.2.0 ...
Fri May  1 18:56:54 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Fri May  1 18:56:54 2020: setting parameter 'engine':'realtime-priority':'(null)' to value "80"
Fri May  1 18:56:54 2020: setting parameter 'drivers':'alsa':'device' to value "hw:DSP24,0"
Fri May  1 18:56:54 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:DSP24,0"
Fri May  1 18:56:54 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:DSP24,0"
Fri May  1 18:56:54 2020: setting parameter 'drivers':'alsa':'period' to value "1024"
Fri May  1 18:56:54 2020: setting parameter 'drivers':'alsa':'hwmon' to value "false"
Fri May  1 18:56:54 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "false"
Fri May  1 18:56:54 2020: setting parameter 'drivers':'alsa':'duplex' to value "false"
Fri May  1 18:56:54 2020: setting parameter 'drivers':'alsa':'monitor' to value "false"
Fri May  1 18:56:54 2020: setting parameter 'drivers':'alsa':'inchannels' to value "10"
Fri May  1 18:56:54 2020: setting parameter 'drivers':'alsa':'outchannels' to value "10"
Fri May  1 18:56:54 2020: setting parameter 'drivers':'alsa':'midi-driver' to value "none"
Fri May  1 18:56:54 2020: Listening for D-Bus messages
Fri May  1 18:56:54 2020: Starting jack server...
Fri May  1 18:56:54 2020: ERROR: `default' server already active
Fri May  1 18:56:54 2020: ERROR: Failed to open server


    voila les infos de ce jour
    Envoyé par olinuxx le Samedi 02 mai 2020 19:35 France
    Copy to clipboard
    cat  /home/totof/.config/jack/conf.xml


    D'autre part :
    Copy to clipboard
    Fri May  1 18:56:27 2020: ERROR: ALSA: cannot set channel count to 10 for capture

    et
    Copy to clipboard
    Fri May  1 18:56:54 2020: ERROR: `default' server already active

    sont les choses qu'il te faudrait investiguer.

    Ceci dit, dans un premier temps, je te conseillerai déjà de régler ton système pour faire fonctionner JACK sur la puce audio de la carte mère, en ayant retiré physiquement la DSP24. Ça permettra de s'assurer que JACK fonctionne correctement avant de commencer à régler précisément la DSP24. D'ailleurs, c'est quel marque/modèle exactement cette DSP24 ?
    Envoyé par BlackAngel77 le Samedi 02 mai 2020 20:37
    Rebonjour olinuxx

    Marque ST audio, modèle « Hoontech dsp24 + rack » basée sur la puce ice 1712
    Envoyé par BlackAngel77 le Mardi 05 mai 2020 14:54
    Bonjour à tous

    - Pour vous donner les avancer sur le sujet:
    J'ai installé sur un laptop Lenovo yoga 13 (core i7, 16go de ram et ssd 256 Go), librazik 2
    il va devenir ma station centrale le temps de refaire la tour I5.

    - Pour la I5 je vais procéder comme suit:
    je vais suivre olinuxx en effectuant un test en débranchant le carte son et en utilisant celle de la CM.
    et je vais fournir
    Copy to clipboard
    cat  /home/totof/.config/jack/conf.xml


    - si test non concluant:
    je vais refaire une installation complète en méthode 2 de LZK2 car bios avec UEFI.
    j'effectuerai le test avec la carte son d'origine de la CM, pour constater le fonctionnement de jack.
    si ok, je réinstallerai la carte son.
    Et j'aviserai après.

    Messieurs si vous voyez quelque chose de déconnants dans ce que j'ai écris merci de revenir vers moi.
    Envoyé par olinuxx le Mercredi 06 mai 2020 18:09 France
    Ça me semble un bon plan d'attaque.
    Page: 1/2  [Suivant]
    1  2